This page lists 9 engine parts for the 1964 Abarth 850, across 7 part types, covering the 847cc L4 engine. Every part shows its brand, manufacturer part number and fitment notes.
The engine on the 1964 Abarth 850 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Crankshaft Seal (2 parts), Cylinder Head Gasket (2 parts) and Conversion / Lower Gasket Set (1 part). The other 4 part types cover the remaining 4 parts.
Every part on this page is matched to the 847cc L4 — the only engine offered in the 1964 Abarth 850.
Every engine part listed for the 1964 Abarth 850 comes from AJUSA.
Each part number listed for the 1964 Abarth 850 opens a page with every vehicle that part fits.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 54009500 | 🇺🇸 US | Base ModelEngine # 100G | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
This group shows a single part: AJUSA 54009500.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 15019000 | 🇺🇸 US | FrontBase Model | View on Amazon |
| AJUSA | 15030900 | 🇺🇸 US | RearBase Model | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
AJUSA supplies both parts for the 1964 Abarth 850.
This group includes AJUSA 15019000 and AJUSA 15030900.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 81010100 | 🇺🇸 US | Base ModelEngine # 100G | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
This group shows a single part: AJUSA 81010100.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 10072600 | 🇺🇸 US | Base ModelEngine # 100G | View on Amazon |
| AJUSA | 10041500 | 🇺🇸 US | Base ModelEngine # 100G | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Cylinder Head Gasket parts for the 1964 Abarth 850 come from AJUSA.
Part numbers include AJUSA 10072600 and AJUSA 10041500.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 52038400 | 🇺🇸 US | Base ModelEngine # 100G | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
This group shows a single part: AJUSA 52038400.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 50044800 | 🇺🇸 US | Base ModelEngine # 100G | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
This group shows a single part: AJUSA 50044800.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 59001700 | 🇺🇸 US | Base ModelEngine # 100G | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 1964 Abarth 850 — AJUSA 59001700.
Buying Engine Parts for a 1964 Abarth 850
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 847cc L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Crankshaft Seal and Cylinder Head Gasket .
Frequently Asked Questions
How many engine parts fit the 1964 Abarth 850?
Our catalog currently lists 9 engine parts for the 1964 Abarth 850 across 7 subcategories and 1 brand, covering the 847cc L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 1964 Abarth 850?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1964 Abarth 850 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1964 Abarth 850?
Every part on this page is matched to the 847cc L4 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1964 Abarth 850
Engine Parts for Other Abarth 850 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.