1992 Acura Legend Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

4 Camshaft Repair Sleeve parts for the 1992 Acura Legend come from 4 brands — BCA, NATIONAL, SKF and 1 other brand.

Listed part numbers: BCA NS99139 and NATIONAL 99139, plus the other parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts for the 1992 Acura Legend come from 14 brands — FEL-PRO, NATIONAL, TIMKEN and 11 other brands. The "Popular" part is FEL-PRO TCS45704.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 1992 Acura Legend — TOPLINE CRAC2.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts are listed for the 1992 Acura Legend, from ITM ENGINE COMPONENTS and KING ENGINE BEARINGS.

Listed part numbers: ITM ENGINE COMPONENTS 6B3000 and KING ENGINE BEARINGS CR6759AM.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts are listed for the 1992 Acura Legend, from ENGINETECH, APEX, ITM ENGINE COMPONENTS and 2 other brands. ENGINETECH AC32CSA carries the "Popular" badge.

Part numbers include ENGINETECH AC32CSA, APEX ACS1028 and ITM ENGINE COMPONENTS 0921009, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Crankshaft Main Bearing parts for the 1992 Acura Legend come from 3 brands — TOPLINE, ITM ENGINE COMPONENTS and KING ENGINE BEARINGS.

This group includes ITM ENGINE COMPONENTS 4M9510, KING ENGINE BEARINGS MB4062AM and TOPLINE TWAC2 and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 1992 Acura Legend come from 6 brands — BCA, NATIONAL, SCHAEFFLER and 3 other brands. The "Popular" part is BCA NS99315.

This group includes BCA NS99315, NATIONAL 99315 and SCHAEFFLER SR3549 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

19 Crankshaft Seal parts for the 1992 Acura Legend come from 14 brands — APEX, ELRING, FEL-PRO and 11 other brands. The "Popular" part is APEX ABS128.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Cylinder Head Gasket parts are listed for the 1992 Acura Legend, from FEL-PRO, AJUSA, APEX and 3 other brands. FEL-PRO 9031PT carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts are listed for the 1992 Acura Legend, from ENGINETECH, AJUSA, APEX and 2 other brands. ENGINETECH AC32HSA carries the "Popular" badge.

This group includes ENGINETECH AC32HSA, AJUSA 52151500 and APEX AHS1028 and the remaining parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11419.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts are listed for the 1992 Acura Legend, from APEX, ENGINETECH and TOPLINE.

This group includes APEX AFS1028, ENGINETECH AC32K2 and TOPLINE CGSAC2.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts for the 1992 Acura Legend come from 4 brands — ENGINETECH, ITM ENGINE COMPONENTS, SBI and 1 other brand.

This group includes ENGINETECH EM2661, ITM ENGINE COMPONENTS RX9511 and SBI 10437 and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 1992 Acura Legend, from AJUSA, ITM ENGINE COMPONENTS, FEL-PRO and 1 other brand. AJUSA 13130900 carries the "Popular" badge.

Listed part numbers: AJUSA 13130900, FEL-PRO MS95683 and AJUSA 13131000, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Plenum Gasket parts for the 1992 Acura Legend come from 2 brands — APEX and BECK/ARNLEY.

Part numbers include APEX AMS1282, APEX AMS1283 and BECK/ARNLEY 0374828, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts for the 1992 Acura Legend come from 4 brands — TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. The "Popular" part is ENGINETECH IM2662.

Listed part numbers: ENGINETECH IM2662, ITM ENGINE COMPONENTS RV9510 and SBI 10436, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts for the 1992 Acura Legend come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Part numbers include ANCHOR 9083, DEA / MARMON RIDE CONTROL A6599 and PIONEER 619083, among others listed above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

21 Oil parts for the 1992 Acura Legend come from 3 brands — MOBIL, VALVOLINE and IDEMITSU. The "Popular" part is MOBIL 125195.

The Full Synthetic section lists 8 options from MOBIL and VALVOLINE — full-synthetic oils. MOBIL 125195 is listed in this group.

In the High Mileage (>75,000 Miles) grade, VALVOLINE and MOBIL supply 8 parts: oils grouped for high-mileage engines. A representative part number is VALVOLINE VV1556.

The Racing section lists 1 option from IDEMITSU — grouped under the catalog's "Racing" designation — the notes column spells out what sets them apart. IDEMITSU 30018100750 is listed in this group.

The Synthetic Blend section lists 4 options from MOBIL and VALVOLINE — synthetic-blend oils. MOBIL 124406 is listed in this group.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 1992 Acura Legend.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

11 Oil Drain Plug parts for the 1992 Acura Legend come from 5 brands — DORMAN, ELRING, AGS and 2 other brands. The "Popular" part is AGS ODP00007.

In the Piggyback grade, DORMAN supplies 1 part: grouped under the catalog's "Piggyback" designation — the notes column spells out what sets them apart. A representative part number is DORMAN 65229.

In the Twist Drain grade, DORMAN supplies 1 part: grouped under the catalog's "Twist Drain" designation — the notes column spells out what sets them apart. A representative part number is DORMAN 092020.

In the Universal grade, DORMAN supplies 1 part: grouped under the catalog's "Universal" designation — the notes column spells out what sets them apart. A representative part number is DORMAN 65102.

8 further parts sit outside the graded sections, with the same engine-level match.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts are listed for the 1992 Acura Legend, from DORMAN, FEL-PRO, AJUSA and 3 other brands. DORMAN 095144 carries the "Popular" badge.

This group includes DORMAN 095144, FEL-PRO 73346 and AJUSA 22007400 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 1992 Acura Legend come from 4 brands — BECK/ARNLEY, GATES, MOTORAD and 1 other brand.

This group includes BECK/ARNLEY 0160125, GATES 31109 and MOTORAD MO81 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

21 Oil Filter parts for the 1992 Acura Legend come from 14 brands — PUROLATOR, FAMOUS BRAND, FRAM and 11 other brands. The "Popular" part is FRAM FP8212.

The Economy section lists 18 options from PUROLATOR, FAMOUS BRAND, CHAMP / LUBER-FINER and 9 other brands — the catalog's value-priced group. FRAM FP8212 is listed in this group.

In the Standard Replacement grade, FRAM, WIX and HASTINGS / BALDWIN supply 3 parts: built to original-equipment specification. A representative part number is FRAM PH8212.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

One part is listed for the 1992 Acura Legend — TOPLINE PAAC2.

This table covers the rings that seal each piston to the cylinder wall. Read more

4 Piston Ring parts are listed for the 1992 Acura Legend, from HASTINGS MANUFACTURING, ITM ENGINE COMPONENTS and TOPLINE.

Part numbers include HASTINGS MANUFACTURING 2C4667, HASTINGS MANUFACTURING 2C4667S and ITM ENGINE COMPONENTS 0216501, among others listed above.