1998 Acura SLX Cooling System Parts

Engine:
3.5L V6

This page lists 15 cooling system parts for the 1998 Acura SLX, across 4 part types, covering the 3.5L V6 engine. Every part shows its brand, manufacturer part number and fitment notes.

The cooling system system on the 1998 Acura SLX keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses. The largest groups are Radiator (6 parts), Cooling System Tester Adapter (4 parts) and Coolant Hose / Pipe (3 parts). The other 1 part type covers the remaining 2 parts.

Coolant Hose / Pipe

Brand Part Number Markets Notes Buy
ACDELCO 14064S
🇺🇸 US 🇨🇦 CA
Professional / GoldMolded
Fitment notes — ACDELCO 14064S
Professional / GoldMolded
Protective sleeve required
View on
Amazon
CONTINENTAL 63347
🇺🇸 US
Molded
View on
Amazon
GATES 18421
🇺🇸 US
Molded1/2" x 8"
Fitment notes — GATES 18421
Molded1/2" x 8"
Protective sleeve required
View on
Amazon

This table covers the hard pipes and extra hoses in the coolant circuit.

Cooling Fan Control Module

Brand Part Number Markets Notes Buy
US MOTOR WORKS 16779
🇺🇸 US
Better Control
View on
Amazon
US MOTOR WORKS 16795
🇺🇸 US
Best Control
View on
Amazon

This table covers the Cooling Fan control modules.

Cooling System Tester Adapter

Brand Part Number Markets Notes Buy
GATES 31428
🇺🇸 US
May Require Spacer Number 31416
Fitment notes — GATES 31428
May Require Spacer Number 31416
Cooling System Pressure
View on
Amazon
MOTORAD 3121
🇺🇸 US
StandardRadiator Cap Adapter
Fitment notes — MOTORAD 3121
StandardRadiator Cap Adapter
Cooling System PressureRadiator Cap Adapter
View on
Amazon
MOTORAD 3122
🇺🇸 US
Standard
Fitment notes — MOTORAD 3122
Standard
Cooling System Pressure
View on
Amazon
STANT 12021
🇺🇸 US
Radiator Cap/Cooling System Tester Adapter
Fitment notes — STANT 12021
Radiator Cap/Cooling System Tester Adapter
Cooling System PressureRadiator Cap Adapter
View on
Amazon

This table covers the adapters used to pressure-test this cooling system.

Radiator

Economy

Brand Part Number Markets Notes Buy
TECHPRO IZ3010101
🇺🇸 US 🇨🇦 CA
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
KOYORAD Popular A2221
🇺🇸 US
View on
Amazon
SPECTRA PREMIUM Popular CU1302
🇺🇸 US
View on
Amazon
AGILITY 8011302
🇺🇸 US
View on
Amazon
FVP RAD2221
🇺🇸 US
View on
Amazon
OSC 2221
🇺🇸 US
View on
Amazon

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap.

Buying Cooling System Parts for a 1998 Acura SLX

On this vehicle, the cooling system system keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses.

  • Confirm you have the 3.5L V6 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Radiator and Cooling System Tester Adapter .

Frequently Asked Questions

How many cooling system parts fit the 1998 Acura SLX?

Our catalog currently lists 15 cooling system parts for the 1998 Acura SLX across 4 subcategories and 12 brands, covering the 3.5L V6 engine. Each part is matched to the engine(s) it fits.

What are the signs of cooling system problems on a 1998 Acura SLX?

Common symptoms include a rising temperature gauge in traffic, sweet-smelling steam, crusty deposits around hose clamps, or a heater that blows cold. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1998 Acura SLX was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1998 Acura SLX?

Every part on this page is matched to the 3.5L V6 engine. Then replace coolant with the exact specification the manufacturer calls for — mixing chemistries can gel and block small passages. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1998 Acura SLX

Cooling System Parts for Other Acura SLX Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.