1999 Acura CL Engine Parts

This table covers the seals at the Auxiliary Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 67031.

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

13 Balance Shaft Belt parts for the 1999 Acura CL come from 12 brands — GATES, CLOYES, ITM ENGINE COMPONENTS and 9 other brands. The "Popular" part is CLOYES B186.

The Economy section lists 4 options from CLOYES, ITM ENGINE COMPONENTS, PREFERRED COMPONENTS INC and 1 other brand — the catalog's value-priced group. CLOYES B186 is listed in this group.

The High Performance section lists 1 option from GATES — engineered beyond original-equipment specification. GATES T186RB is listed in this group.

In the Standard Replacement grade, CONTINENTAL, GATES, ACDELCO and 5 other brands supply 8 parts: built to original-equipment specification. A representative part number is CONTINENTAL 40186.

This table covers the Balance Shaft Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

10 Balance Shaft Belt Tensioner parts are listed for the 1999 Acura CL, from CLOYES, GMB, BECK/ARNLEY and 7 other brands. CLOYES 95204 carries the "Popular" badge.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Balance Shaft Seal parts for the 1999 Acura CL come from 5 brands — SKF, BCA, CONTINENTAL and 2 other brands. The "Popular" part is SKF 10584.

Part numbers include SKF 10584, BCA NS712009 and CONTINENTAL CS9021, among others listed above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts are listed for the 1999 Acura CL, from SCHAEFFLER, SKF and WJB / INMOTION PARTS.

Listed part numbers: SCHAEFFLER SR3461, SKF 99111 and WJB / INMOTION PARTS WS99111.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

15 Camshaft Seal parts are listed for the 1999 Acura CL, from AUTO EXTRA, FEL-PRO, MAHLE / CLEVITE and 11 other brands. FEL-PRO TCS45898 carries the "Popular" badge.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRH36.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts for the 1999 Acura CL come from 5 brands — KING ENGINE BEARINGS, ENGINETECH, MAHLE / CLEVITE and 2 other brands. The "Popular" part is ENGINETECH BB1536.

The High Performance section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS CR4541XP is listed in this group.

Standard Replacement: 5 parts, from ENGINETECH, MAHLE / CLEVITE, ITM ENGINE COMPONENTS and 2 other brands. A representative part number is ENGINETECH BB1536.

Listed part numbers: ENGINETECH BB1536, KING ENGINE BEARINGS CR4541XP and MAHLE / CLEVITE CB1860P, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts for the 1999 Acura CL come from 7 brands — APEX, ENGINETECH, AJUSA and 4 other brands. The "Popular" part is APEX ACS1039.

Listed part numbers: APEX ACS1039, ENGINETECH HO22CSA and AJUSA 54094200, plus the other parts above.

This table covers the Counter Balance Shaft Seal kits. Read more

This group shows a single part: DORMAN 917006.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Crankshaft Main Bearing parts are listed for the 1999 Acura CL, from MAHLE / CLEVITE, KING ENGINE BEARINGS, TOPLINE and 3 other brands. KING ENGINE BEARINGS MB5568AM carries the "Popular" badge.

High Performance: 2 parts, from KING ENGINE BEARINGS and MAHLE / CLEVITE. A representative part number is KING ENGINE BEARINGS MB5568XP.

The Standard Replacement section: 8 options from MAHLE / CLEVITE, TOPLINE, KING ENGINE BEARINGS and 3 other brands. KING ENGINE BEARINGS MB5568AM is listed in this group.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

8 Crankshaft Repair Sleeve parts are listed for the 1999 Acura CL, from SCHAEFFLER, TIMKEN, BCA and 3 other brands. BCA NS99315 carries the "Popular" badge.

Listed part numbers: BCA NS99315, FEL-PRO 16275 and SCHAEFFLER SR3483, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

24 Crankshaft Seal parts are listed for the 1999 Acura CL, from APEX, FEL-PRO, MAHLE / CLEVITE and 12 other brands. APEX ABS100 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts for the 1999 Acura CL come from 8 brands — ELRING, APEX, FEL-PRO and 5 other brands. The "Popular" part is APEX AHB139.

Part numbers include APEX AHB139, FEL-PRO ES71329 and AJUSA 81027400, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts for the 1999 Acura CL come from 7 brands — APEX, FEL-PRO, AJUSA and 4 other brands. The "Popular" part is APEX AHG139.

Listed part numbers: APEX AHG139, FEL-PRO 9958PT1 and AJUSA 10125300, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Cylinder Head Gasket Set parts for the 1999 Acura CL come from 10 brands — FEL-PRO, ENGINETECH, APEX and 7 other brands. The "Popular" part is APEX AHS1039.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: SBI 2302163.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 1999 Acura CL — KAT'S HEATERS 11419.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO AC1228105.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts for the 1999 Acura CL come from 5 brands — APEX, AJUSA, ENGINETECH and 2 other brands. The "Popular" part is APEX AFS1039.

Part numbers include APEX AFS1039, AJUSA 50180900 and ENGINETECH HO22K6, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts are listed for the 1999 Acura CL, from ENGINETECH, ITM ENGINE COMPONENTS, MELLING and 3 other brands. ENGINETECH EM4349 carries the "Popular" badge.

Listed part numbers: ENGINETECH EM4349, ITM ENGINE COMPONENTS RX9558 and MELLING V5542, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts for the 1999 Acura CL come from 4 brands — SKP, ATP, DAYCO and 1 other brand.

The Economy section: 1 option from SKP. SKP SK594187 is listed in this group.

Standard Replacement: 3 parts, from ATP, DAYCO and PIONEER. A representative part number is ATP 102162.

Listed part numbers: SKP SK594187, ATP 102162 and DAYCO PB1356N, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts for the 1999 Acura CL come from 7 brands — AJUSA, FEL-PRO, VICTOR REINZ and 4 other brands. The "Popular" part is FEL-PRO MS941251.

Listed part numbers: FEL-PRO MS941251, VICTOR REINZ 111052201 and AJUSA 13110200, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Plenum Gasket parts are listed for the 1999 Acura CL, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO MS93325, MAHLE / CLEVITE MS17800 and VICTOR REINZ 711687100.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts are listed for the 1999 Acura CL, from ENGINETECH, MELLING, ITM ENGINE COMPONENTS and 4 other brands. ENGINETECH IM4348 carries the "Popular" badge.

Part numbers include ENGINETECH IM4348, MELLING V5541 and ITM ENGINE COMPONENTS RV9560, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

16 Motor Mount parts are listed for the 1999 Acura CL, from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 4 other brands. SKP SKM8404 carries the "Popular" badge.

Economy: 3 parts, from FAMOUS BRAND and SKP. A representative part number is SKP SKM8404.

The Standard Replacement section: 13 options from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 2 other brands. ANCHOR 8432 is listed in this group.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

18 Oil parts are listed for the 1999 Acura CL, from MOBIL, VALVOLINE and IDEMITSU. MOBIL 125195 carries the "Popular" badge.

In the Full Synthetic grade, MOBIL and VALVOLINE supply 7 parts: full-synthetic oils. A representative part number is MOBIL 125195.

The High Mileage (>75,000 Miles) section lists 6 options from MOBIL and VALVOLINE — oils grouped for high-mileage engines. MOBIL 125201 is listed in this group.

In the Racing grade, IDEMITSU supplies 1 part: grouped under the catalog's "Racing" designation — the notes column spells out what sets them apart. A representative part number is IDEMITSU 30018100750.

In the Synthetic Blend grade, MOBIL and VALVOLINE supply 4 parts: synthetic-blend oils. A representative part number is MOBIL 124406.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 1999 Acura CL come from HAYDEN.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

DORMAN supplies both parts for the 1999 Acura CL.

Part numbers include DORMAN 921070 and DORMAN 921078.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts are listed for the 1999 Acura CL, from DORMAN, ELRING, AGS and 2 other brands. AGS ODP00007 carries the "Popular" badge.

Part numbers include AGS ODP00007, DORMAN 090053 and BECK/ARNLEY 0160088, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 1999 Acura CL come from 5 brands — DORMAN, APEX, ELRING and 2 other brands. The "Popular" part is DORMAN 095144.

Part numbers include DORMAN 095144, APEX ADP1909 and ELRING 243600, among others listed above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 1999 Acura CL, from BECK/ARNLEY, GATES, MOTORAD and 1 other brand.

This group includes BECK/ARNLEY 0160125, GATES 31109 and MOTORAD MO81 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

21 Oil Filter parts are listed for the 1999 Acura CL, from VARIOUS MFR, BOSCH, WIX and 14 other brands. MOBIL M1104A carries the "Popular" badge.

Economy: 7 parts, from VARIOUS MFR, BOSCH, FRAM and 3 other brands. A representative part number is BOSCH 72228WS.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1104A.

The Standard Replacement section: 12 options from BOSCH, DENSO, WIX and 9 other brands. BOSCH 3312 is listed in this group.

This table covers the Oil Filter Support tubes. Read more

This group shows a single part: AUTOTECNICA HA1416938.

This table covers the oil pans that hold the engine's oil sump. Read more

8 Oil Pan parts for the 1999 Acura CL come from 8 brands — SKP, ACKOJA, AUTOTECNICA and 5 other brands. The "Popular" part is SKP SK264406.

This group includes SKP SK264406, ACKOJA A260177 and AUTOTECNICA HA1416277 and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Oil Pan Gasket parts are listed for the 1999 Acura CL, from FEL-PRO, APEX, ITM ENGINE COMPONENTS and 3 other brands. APEX AOP114 carries the "Popular" badge.

Listed part numbers: APEX AOP114, FEL-PRO OS30632R and FEL-PRO OS30890, plus the other parts above.

This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1999 Acura CL — FEL-PRO 73196.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

5 Oil Pump parts are listed for the 1999 Acura CL, from ENGINETECH, SKP, MELLING and 2 other brands. MELLING M232 carries the "Popular" badge.

Economy: 2 parts, from ENGINETECH and SKP. A representative part number is ENGINETECH EPK130.

The Standard Replacement section: 3 options from MELLING, ITM ENGINE COMPONENTS and TOPLINE. MELLING M232 is listed in this group.

Part numbers include MELLING M232, ENGINETECH EPK130 and SKP SKOM232, among others listed above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 00723000.

This table covers the wear sleeves used to restore a Oil Pump seal surface. Read more

2 Oil Pump Repair Sleeve parts for the 1999 Acura CL come from 2 brands — SCHAEFFLER and TIMKEN.

This group includes SCHAEFFLER SR3460 and TIMKEN KWK99106.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Oil Pump Seal parts for the 1999 Acura CL come from 7 brands — SCHAEFFLER, TIMKEN, BCA and 4 other brands. The "Popular" part is SCHAEFFLER SS2237.

This group includes SCHAEFFLER SS2237, TIMKEN 712009 and BCA NS712009 and the remaining parts above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

2 Piston parts for the 1999 Acura CL come from 2 brands — ITM ENGINE COMPONENTS and TOPLINE.

Part numbers include ITM ENGINE COMPONENTS RY6793 and TOPLINE PAH36.