2011 Acura MDX Automatic Transmission Parts

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

3 Clutch Plate Pack parts for the 2011 Acura MDX come from RAYBESTOS POWERTRAIN.

In the Friction Plate Pack grade, RAYBESTOS POWERTRAIN supplies 1 part: grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN RCP96265.

The Steel Plate Pack section lists 1 option from RAYBESTOS POWERTRAIN — grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN STMHONDA60 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

Listed part numbers: RAYBESTOS POWERTRAIN RCP96265, RAYBESTOS POWERTRAIN STMHONDA60 and RAYBESTOS POWERTRAIN RCPTC04.

This table covers the wear sleeves used to restore a Extension Housing seal surface. Read more

4 Extension Housing Repair Sleeve parts are listed for the 2011 Acura MDX, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Part numbers include BCA NS99166, NATIONAL 99166 and SCHAEFFLER SR3507, among others listed above.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Extension Housing Seal parts are listed for the 2011 Acura MDX, from NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 710795 and WJB / INMOTION PARTS WS710795.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

7 Filter parts for the 2011 Acura MDX come from 4 brands — VARIOUS MFR, BECK/ARNLEY, VAICO and 1 other brand. The "Popular" part is BECK/ARNLEY 0440434.

The Economy section lists 2 options from VARIOUS MFR — the catalog's value-priced group. VARIOUS MFR PT99445 is listed in this group.

In the Standard Replacement grade, BECK/ARNLEY, VAICO and ATP supply 5 parts: built to original-equipment specification. A representative part number is BECK/ARNLEY 0440434.

This group includes BECK/ARNLEY 0440434, VARIOUS MFR PT99445 and VARIOUS MFR PT99677 and the remaining parts above.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

4 Fluid Cooler parts for the 2011 Acura MDX come from 3 brands — KOYORAD, GPD and SPECTRA PREMIUM.

Listed part numbers: GPD 2611386, KOYORAD EC0060J and KOYORAD EC0060, plus the other parts above.

This table covers the Fluid Pan drain plugs. Read more

One part is listed for the 2011 Acura MDX — DORMAN 090178.

This table covers the Fluid temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

3 Fluid Temperature Sensor parts for the 2011 Acura MDX come from 3 brands — GPD, STANDARD MOTOR PRODUCTS and WELLS.

This group includes GPD 1814599, STANDARD MOTOR PRODUCTS TX252 and WELLS 5S13525.

This table covers the seals at the Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Input Shaft Seal parts are listed for the 2011 Acura MDX, from SKF and WJB / INMOTION PARTS.

Part numbers include SKF 20335A and WJB / INMOTION PARTS WS20335A.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Manual Shaft Seal parts are listed for the 2011 Acura MDX, from BCA, NATIONAL, TIMKEN and 1 other brand.

Part numbers include BCA NS221207 and NATIONAL 221207, among others listed above.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

7 Output Shaft Repair Sleeve parts for the 2011 Acura MDX come from 4 brands — NATIONAL, WJB / INMOTION PARTS, BCA and 1 other brand. The "Popular" part is NATIONAL 99145.

Part numbers include NATIONAL 99145, WJB / INMOTION PARTS WS99166 and BCA NS99145, among others listed above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Output Shaft Seal parts for the 2011 Acura MDX come from 6 brands — NATIONAL, WJB / INMOTION PARTS, BECK/ARNLEY and 3 other brands. The "Popular" part is BECK/ARNLEY 0523523.

This group includes BECK/ARNLEY 0523523, NATIONAL 710913 and NATIONAL 710914 and the remaining parts above.

This table covers the seals at the Pinion. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: WJB / INMOTION PARTS WS710911.

This table covers the Shift Interlock solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS TCS267.

This table covers the wear sleeves used to restore a Shift Shaft seal surface. Read more

One part is listed for the 2011 Acura MDX — SKF 99049.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Shift Shaft Seal parts are listed for the 2011 Acura MDX, from SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER SS2111 and SKF 4710.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Shift Solenoid parts are listed for the 2011 Acura MDX, from BECK/ARNLEY and STANDARD MOTOR PRODUCTS.

Listed part numbers: BECK/ARNLEY 0470016 and STANDARD MOTOR PRODUCTS TCS267.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

This group shows a single part: TC REMANUFACTURING HO31.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Torque Converter Shaft Seal parts are listed for the 2011 Acura MDX, from NATIONAL, TIMKEN and WJB / INMOTION PARTS.

This group includes NATIONAL 710912, TIMKEN SL260085 and WJB / INMOTION PARTS WS710912.

This table covers the seals at the Transfer Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Shaft Seal parts for the 2011 Acura MDX come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 710796 and WJB / INMOTION PARTS WS710796.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

17 Transmission Fluid parts for the 2011 Acura MDX come from 9 brands — VALVOLINE, LIQUI MOLY, PENTOSIN and 6 other brands. The "Popular" part is ACDELCO 109243.

In the ATF 64 grade, PENTOSIN supplies 2 parts: grouped under the catalog's "ATF 64" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058113.

The Dexron section lists 1 option from ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

In the DW-1 grade, AISIN supplies 1 part: grouped under the catalog's "DW-1" designation — the notes column spells out what sets them apart. A representative part number is AISIN ATFDW1.

The Multi-Vehicle section lists 10 options from VALVOLINE, LIQUI MOLY, LUCAS OIL and 2 other brands — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

The Type III (H) section lists 2 options from IDEMITSU — grouped under the catalog's "Type III (H)" designation — the notes column spells out what sets them apart. IDEMITSU 30040090750 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

8 Transmission Fluid Additive parts for the 2011 Acura MDX come from LUBEGARD. The "Popular" part is LUBEGARD 19610.

Part numbers include LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689, among others listed above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Transmission Mount parts are listed for the 2011 Acura MDX, from SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 3 other brands. ANCHOR 9667 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKM9690.

The Standard Replacement section: 5 options from ANCHOR, DEA / MARMON RIDE CONTROL, BECK/ARNLEY and 2 other brands. ANCHOR 9667 is listed in this group.

Listed part numbers: ANCHOR 9667, SKP SKM9690 and DEA / MARMON RIDE CONTROL A65094, plus the other parts above.