2012 Acura RDX Automatic Transmission Parts

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

2 Clutch Plate Pack parts for the 2012 Acura RDX come from RAYBESTOS POWERTRAIN.

In the Friction Plate Pack grade, RAYBESTOS POWERTRAIN supplies 1 part: grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN RCP96268.

The Steel Plate Pack section lists 1 option from RAYBESTOS POWERTRAIN — grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN STMHONDA61 is listed in this group.

Listed part numbers: RAYBESTOS POWERTRAIN RCP96268 and RAYBESTOS POWERTRAIN STMHONDA61.

This table covers the gaskets that seal the Drain Plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2012 Acura RDX — DORMAN 652530CD.

This table covers the wear sleeves used to restore a Extension Housing seal surface. Read more

3 Extension Housing Repair Sleeve parts are listed for the 2012 Acura RDX, from BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99189, NATIONAL 99189 and WJB / INMOTION PARTS WS99189.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Extension Housing Seal parts are listed for the 2012 Acura RDX, from NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 710795 and WJB / INMOTION PARTS WS710795.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

6 Filter parts for the 2012 Acura RDX come from 4 brands — BECK/ARNLEY, VAICO, VARIOUS MFR and 1 other brand. The "Popular" part is VARIOUS MFR PT99442.

The Economy section lists 1 option from VARIOUS MFR — the catalog's value-priced group. VARIOUS MFR PT99442 is listed in this group.

In the Standard Replacement grade, BECK/ARNLEY, VAICO and ATP supply 5 parts: built to original-equipment specification. A representative part number is BECK/ARNLEY 0440383.

This group includes VARIOUS MFR PT99442, BECK/ARNLEY 0440383 and ATP B264 and the remaining parts above.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

5 Fluid Cooler parts for the 2012 Acura RDX come from 5 brands — SKP, DORMAN, GPD and 2 other brands. The "Popular" part is SKP SKTOC002.

Listed part numbers: SKP SKTOC002, DORMAN 918271 and GPD 2611329, plus the other parts above.

This table covers the Fluid Pan drain plugs. Read more

One part is listed for the 2012 Acura RDX — DORMAN 090178.

This table covers the Fluid temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

4 Fluid Temperature Sensor parts for the 2012 Acura RDX come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS TX252, STANDARD MOTOR PRODUCTS TX253 and WELLS 5S9603, plus the other parts above.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts are listed for the 2012 Acura RDX, from BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS221207, NATIONAL 221207 and WJB / INMOTION PARTS WS221207.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

7 Output Shaft Repair Sleeve parts for the 2012 Acura RDX come from 4 brands — NATIONAL, BCA, WJB / INMOTION PARTS and 1 other brand. The "Popular" part is NATIONAL 99139.

Part numbers include NATIONAL 99139, NATIONAL 99157 and BCA NS99139, among others listed above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Output Shaft Seal parts for the 2012 Acura RDX come from 7 brands — SKF, SCHAEFFLER, TIMKEN and 4 other brands. The "Popular" part is NATIONAL 712551.

This table covers the rebuild kits for this assembly. Read more

TRANSTEC supplies the 3 Rebuild Kit parts for the 2012 Acura RDX.

Part numbers include TRANSTEC 81000230, TRANSTEC 81000237 and TRANSTEC 81000498.

This table covers the wear sleeves used to restore a Shift Shaft seal surface. Read more

One part is listed for the 2012 Acura RDX — SKF 99049.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Shift Shaft Seal parts are listed for the 2012 Acura RDX, from SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER SS2111 and SKF 4710.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

8 Shift Solenoid parts are listed for the 2012 Acura RDX, from STANDARD MOTOR PRODUCTS, ROSTRA, BECK/ARNLEY and 3 other brands. ROSTRA 520710 carries the "Popular" badge.

The Single Solenoid section lists 4 options from STANDARD MOTOR PRODUCTS, ROSTRA and BECK/ARNLEY — grouped under the catalog's "Single Solenoid" designation — the notes column spells out what sets them apart. ROSTRA 520710 is listed in this group.

The Solenoid Pack / Kit section lists 1 option from STANDARD MOTOR PRODUCTS — grouped under the catalog's "Solenoid Pack / Kit" designation — the notes column spells out what sets them apart. STANDARD MOTOR PRODUCTS TCS215 is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

This group includes ROSTRA 520710, STANDARD MOTOR PRODUCTS TCS104 and BECK/ARNLEY 0470014 and the remaining parts above.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

This group shows a single part: TC REMANUFACTURING HO28.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

3 Torque Converter Repair Sleeve parts are listed for the 2012 Acura RDX, from NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.

This group includes NATIONAL 99181, SCHAEFFLER SR3501 and WJB / INMOTION PARTS WS99181.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Torque Converter Shaft Seal parts are listed for the 2012 Acura RDX, from TIMKEN, NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 710868, TIMKEN 223543 and TIMKEN 710238 and the remaining parts above.

This table covers the seals at the Transfer Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Shaft Seal parts for the 2012 Acura RDX come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 710796 and WJB / INMOTION PARTS WS710796.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

17 Transmission Fluid parts for the 2012 Acura RDX come from 9 brands — VALVOLINE, LIQUI MOLY, PENTOSIN and 6 other brands. The "Popular" part is ACDELCO 109243.

In the ATF 64 grade, PENTOSIN supplies 2 parts: grouped under the catalog's "ATF 64" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058113.

The Dexron section lists 1 option from ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

In the DW-1 grade, AISIN supplies 1 part: grouped under the catalog's "DW-1" designation — the notes column spells out what sets them apart. A representative part number is AISIN ATFDW1.

The Multi-Vehicle section lists 10 options from VALVOLINE, LIQUI MOLY, LUCAS OIL and 2 other brands — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

The Type III (H) section lists 2 options from IDEMITSU — grouped under the catalog's "Type III (H)" designation — the notes column spells out what sets them apart. IDEMITSU 30040090750 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

8 Transmission Fluid Additive parts for the 2012 Acura RDX come from LUBEGARD. The "Popular" part is LUBEGARD 19610.

This group includes LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689 and the remaining parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Transmission Mount parts are listed for the 2012 Acura RDX, from ANCHOR, BECK/ARNLEY, DEA / MARMON RIDE CONTROL and 2 other brands. ANCHOR 9710 carries the "Popular" badge.

Part numbers include ANCHOR 9710, BECK/ARNLEY 1042405 and DEA / MARMON RIDE CONTROL A65045, among others listed above.