2013 Acura RDX Drivetrain Parts

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: SKF SC0889.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Axle Shaft Seal parts are listed for the 2013 Acura RDX, from SKF, WJB / INMOTION PARTS and TIMKEN. SKF 12605A carries the "Popular" badge.

Part numbers include SKF 12605A, SKF 16541A and TIMKEN SL260469, among others listed above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

15 CV Axle parts are listed for the 2013 Acura RDX, from TOP NOTCH, GSP, TRAKMOTIVE and 2 other brands. APWI HO8515 carries the "Popular" badge.

In the Economy grade, AUTO EXTRA supplies 1 part: the catalog's value-priced group. A representative part number is AUTO EXTRA HO88742.

The Standard Replacement section lists 14 options from TOP NOTCH, GSP, TRAKMOTIVE and 1 other brand — built to original-equipment specification. APWI HO8515 is listed in this group.

This table covers the CV Intermediate shafts. Read more

This group shows a single part: TRAKMOTIVE HO3516.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

4 CV Joint Boot parts are listed for the 2013 Acura RDX, from BECK/ARNLEY and MEVOTECH.

This group includes BECK/ARNLEY 1032927, BECK/ARNLEY 1032888 and MEVOTECH DX634 and the remaining parts above.

This table covers the bearings and races that support the differential carrier. Read more

SKF supplies both parts for the 2013 Acura RDX.

Listed part numbers: SKF BR153 and SKF BR149.

This table covers the Differential Oil temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

One part is listed for the 2013 Acura RDX — BECK/ARNLEY 1581807.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Differential Pinion Seal parts are listed for the 2013 Acura RDX, from SCHAEFFLER, SKF, TIMKEN and 1 other brand.

Listed part numbers: SCHAEFFLER SS6611, SKF 12605A and TIMKEN SL260469, plus the other parts above.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

2 Differential Repair Sleeve parts for the 2013 Acura RDX come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Differential Seal parts for the 2013 Acura RDX come from 4 brands — NATIONAL, SCHAEFFLER, TIMKEN and 1 other brand.

This group includes NATIONAL 710798 and SCHAEFFLER SS6611 and the remaining parts above.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

4 Drive Shaft parts for the 2013 Acura RDX come from 4 brands — DORMAN, GSP, TOP NOTCH and 1 other brand.

Part numbers include DORMAN 986385, GSP PS900101 and TOP NOTCH TN2114PS, among others listed above.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

One part is listed for the 2013 Acura RDX — BECK/ARNLEY 3410300.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

VALVOLINE supplies the 6 Transfer Case Fluid parts for the 2013 Acura RDX. VALVOLINE VV820 carries the "Popular" badge.

This group includes VALVOLINE VV820, VALVOLINE VV975 and VALVOLINE 889785 and the remaining parts above.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

4 Transfer Case Input Shaft Repair Sleeve parts for the 2013 Acura RDX come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Listed part numbers: BCA NS99147, NATIONAL 99147 and SCHAEFFLER SR3476, plus the other parts above.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Input Shaft Seal parts for the 2013 Acura RDX come from 3 brands — WJB / INMOTION PARTS, NATIONAL and SKF.

This group includes NATIONAL 710721, SKF 18883A and WJB / INMOTION PARTS WS710721 and the remaining parts above.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Transfer Case Output Shaft Bearing parts for the 2013 Acura RDX come from NSK.

This group includes NSK 16001 and NSK 16002.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

One part is listed for the 2013 Acura RDX — SKF 99139.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts are listed for the 2013 Acura RDX, from SCHAEFFLER and SKF.

Listed part numbers: SCHAEFFLER SS5926 and SKF 14921.