2020 Acura MDX Drivetrain Parts

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2020 Acura MDX — SKF SC0889.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Axle Shaft Seal parts for the 2020 Acura MDX come from 3 brands — SKF, WJB / INMOTION PARTS and TIMKEN. The "Popular" part is SKF 16541A. 2 parts fit every engine; the other 3 are engine-specific.

Listed part numbers: SKF 16541A, SKF 13702A and TIMKEN SL260478, plus the other parts above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

13 CV Axle parts for the 2020 Acura MDX come from 4 brands — TRAKMOTIVE, GSP, APWI and 1 other brand. The "Popular" part is APWI HO8511.

This table covers the CV Intermediate shafts. Read more

4 CV Intermediate Shaft parts are listed for the 2020 Acura MDX, from TRAKMOTIVE, GSP and TOP NOTCH.

Part numbers include GSP NEX21004, TOP NOTCH TN50099IS and TRAKMOTIVE HO3530, among others listed above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

2 CV Joint Boot parts for the 2020 Acura MDX come from BECK/ARNLEY. Every part fits both the 3.0L V6 ELECTRIC/GAS and the 3.5L V6.

Part numbers include BECK/ARNLEY 1032925 and BECK/ARNLEY 1033102.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

6 Drive Shaft parts are listed for the 2020 Acura MDX, from WJB / INMOTION PARTS, SKP, GSP and 2 other brands. SKP SK986298 carries the "Popular" badge. 4 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: SKP SK986298, GSP PS901487 and TOP NOTCH TN2111PS, plus the other parts above.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

7 Gear Oil parts for the 2020 Acura MDX come from 3 brands — VALVOLINE, LUCAS OIL and ACDELCO. The "Popular" part is ACDELCO 109243.

The Dexron section lists 1 option from ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

The Multi-Vehicle section lists 5 options from VALVOLINE and LUCAS OIL — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. VALVOLINE VV3246 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

This group includes ACDELCO 109243, VALVOLINE VV3246 and LUCAS OIL 11255 and the remaining parts above.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

6 Transfer Case Fluid parts for the 2020 Acura MDX come from VALVOLINE. The "Popular" part is VALVOLINE VV820.

Listed part numbers: VALVOLINE VV820, VALVOLINE VV975 and VALVOLINE 889785, plus the other parts above.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Input Shaft Seal parts are listed for the 2020 Acura MDX, from SKF and WJB / INMOTION PARTS. All of them fit every engine offered in the 2020 MDX.

Listed part numbers: SKF 18883A and WJB / INMOTION PARTS WS18883A.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts for the 2020 Acura MDX come from 2 brands — SKF and WJB / INMOTION PARTS. Every part fits both the 3.0L V6 ELECTRIC/GAS and the 3.5L V6.

Listed part numbers: SKF 16537A and WJB / INMOTION PARTS WS16537A.