This page lists 403 engine parts for the 2020 Acura TLX, across 68 part types, covering all 3 engine options (2.4L L4, 3.5L V6 DOHC and 3.5L V6 SOHC). Every part shows its brand, manufacturer part number and fitment notes.
On the 2020 Acura TLX, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Oil (36 parts), Crankshaft Seal (27 parts) and Variable Valve Timing (VVT) Solenoid / Actuator (26 parts). The other 65 part types cover the remaining 314 parts.
The 2020 Acura TLX was sold with 3 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
68 brands supply engine parts for the 2020 Acura TLX, led by ELRING (31 parts), MAHLE / CLEVITE (22 parts) and CLOYES (21 parts), plus 65 more brands. Quality grades include Standard Replacement, Economy and Premium.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2020 Acura TLX. 69 parts have it, including FEL-PRO TCS46025 (Camshaft Seal) and APEX ACS1055 (Conversion / Lower Gasket Set). Each part number opens a page with every vehicle that part fits.
Balance Shaft Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| S.A. GEAR Fits: 2.4L L4 | C1149 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 2.4L L4 | 76385P | 🇺🇸 US 🇨🇦 CA | Includes Balance Shaft Sprocket, Chain, Tensioner | View on Amazon |
This table covers the chains that drive the balance shafts.
S.A. GEAR supplies both parts for the 2020 Acura TLX.
This group includes S.A. GEAR C1149 and S.A. GEAR 76385P.
Balance Shaft Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | 95989 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 2.4L L4 | 91291 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
2 Balance Shaft Chain Tensioner parts for the 2020 Acura TLX come from 2 brands — CLOYES and S.A. GEAR.
Listed part numbers: CLOYES 95989 and S.A. GEAR 91291.
Balance Shaft Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | S1116 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| S.A. GEAR Fits: 2.4L L4 | S1431 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Balance Shaft sprockets.
2 Balance Shaft Sprocket parts are listed for the 2020 Acura TLX, from CLOYES and S.A. GEAR.
This group includes CLOYES S1116 and S.A. GEAR S1431.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.5L V6 SOHC | TCS46025 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.5L V6 SOHC | 67617 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber | View on Amazon |
| APEX Fits: 3.5L V6 SOHC | ATC1400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| ELRING Fits: 3.5L V6 SOHC | 489890 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| SKF Fits: 3.5L V6 SOHC | 15701 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VICTOR REINZ Fits: 3.5L V6 SOHC | 815377200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
6 Camshaft Seal parts for the 2020 Acura TLX come from 6 brands — FEL-PRO, MAHLE / CLEVITE, APEX and 3 other brands. The "Popular" part is FEL-PRO TCS46025.
Part numbers include FEL-PRO TCS46025, MAHLE / CLEVITE 67617 and APEX ATC1400, among others listed above.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.5L V6 SOHC | BB3516 | 🇺🇸 US | Set | View on Amazon |
| TOPLINE Fits: 3.5L V6 SOHC | RBH52 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
2 Connecting Rod Bearing parts are listed for the 2020 Acura TLX, from ENGINETECH and TOPLINE.
This group includes ENGINETECH BB3516 and TOPLINE RBH52.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 3.5L V6 SOHC | ACS1055 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Popular Fits: 3.5L V6 SOHC | CS26265 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes RTV Sealant | View on Amazon |
| AJUSA Fits: 2.4L L4 | 54328000 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 3.5L V6 SOHC | 54253700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| APEX Fits: 2.4L L4 | ACS1050 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Fits: 2.4L L4 | HO24CSB | 🇺🇸 US | View on Amazon | |
| ENGINETECH Fits: 3.5L V6 SOHC | HO35CSB | 🇺🇸 US | View on Amazon | |
| FEL-PRO Fits: 2.4L L4 | CS26399 | 🇺🇸 US 🇨🇦 CA | Includes RTV Sealant | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.5L V6 SOHC | 0929808 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.5L V6 SOHC | CS54578A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
10 Conversion / Lower Gasket Set parts are listed for the 2020 Acura TLX, from APEX, FEL-PRO, AJUSA and 3 other brands. APEX ACS1055 carries the "Popular" badge.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.5L V6 SOHC | BC2208 | 🇺🇸 US | Set | View on Amazon |
| TOPLINE Fits: 3.5L V6 SOHC | TWH37 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Thrust Bearing | View on Amazon |
| TOPLINE Fits: 3.5L V6 SOHC | MBH52 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
3 Crankshaft Main Bearing parts for the 2020 Acura TLX come from 2 brands — TOPLINE and ENGINETECH.
Listed part numbers: ENGINETECH BC2208, TOPLINE TWH37 and TOPLINE MBH52.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: 2.4L L4, 3.5L V6 SOHC | 99313 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
This group shows a single part: SKF 99313.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 2.4L L4 | TCS46051 | 🇺🇸 US 🇨🇦 CA | FrontMust be used with Oil pan Gasket | View on Amazon |
| FEL-PRO Popular Fits: 2.4L L4 | BS40535 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| FEL-PRO Popular Fits: 3.5L V6 SOHC | BS40685 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.5L V6 SOHC | 67782 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontMolded Rubber | View on Amazon |
| SKP Popular Fits: 3.5L V6 SOHC | SKSEAL029S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Contains 3 Camshaft/Crankshaft Seals | View on Amazon |
| VICTOR REINZ Popular Fits: 3.5L V6 SOHC | 191022201 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| AJUSA Fits: 3.5L V6 SOHC | 15089500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontClockwise | View on Amazon |
| AJUSA Fits: 3.5L V6 SOHC | 15089600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearCounter Clockwise | View on Amazon |
| APEX Fits: 2.4L L4 | ATC1490 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| APEX Fits: 2.4L L4 | ABS128 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| APEX Fits: 3.5L V6 SOHC | ATC1401 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| APEX Fits: 3.5L V6 SOHC | ABS155 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| ELRING Fits: 2.4L L4, 3.5L V6 SOHC | 590797 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Height [MM]: 10Inner Diameter [mm]: 80 | View on Amazon |
| ELRING Fits: 2.4L L4 | 466042 | 🇺🇸 US 🇨🇦 CA | Dust Cover: without dust LipMaterial: FPM (Fluoride Rubber) | View on Amazon |
| ELRING Fits: 2.4L L4 | 459360 | 🇺🇸 US 🇨🇦 CA | Dust Cover: with Dust LipOuter Diameter [mm]: 58 | View on Amazon |
| ELRING Fits: 3.5L V6 SOHC | 490050 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Height [MM]: 7Swirl Type: Right-hand Twist | View on Amazon |
| ELRING Fits: 3.5L V6 SOHC | 464580 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Height [MM]: 8Swirl Type: Right-hand Twist | View on Amazon |
| ELRING Fits: 3.5L V6 SOHC | 478920 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Height [MM]: 8Swirl Type: Left-hand Twist | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 SOHC | 67766 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber | View on Amazon |
| NATIONAL Fits: 3.5L V6 SOHC | 710614 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| SCHAEFFLER Fits: 3.5L V6 SOHC | SS3876 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear10 MM Width | View on Amazon |
| SKF Fits: 2.4L L4 | 31507 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| SKF Fits: 3.5L V6 SOHC | 31495 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 191037201 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 815333800 | 🇺🇸 US 🇨🇦 CA | RubberImproved Design | View on Amazon |
| VICTOR REINZ Fits: 3.5L V6 SOHC | 181011701 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetRubber | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.5L V6 SOHC | WS710614 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
27 Crankshaft Seal parts for the 2020 Acura TLX come from 11 brands — ELRING, VICTOR REINZ, APEX and 8 other brands. The "Popular" part is FEL-PRO TCS46051. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.5L V6 SOHC | ES713291 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| AJUSA Fits: 2.4L L4 | 81041700 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 2.4L L4 | AHB160 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| APEX Fits: 3.5L V6 SOHC | AHB155 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| BECK/ARNLEY Fits: 2.4L L4 | 0161066 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| ELRING Fits: 3.5L V6 SOHC | 533030 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetBolt Head-/Nut Design: Male Star | View on Amazon |
| ELRING Fits: 3.5L V6 SOHC | 468750 | 🇺🇸 US 🇨🇦 CA | SetBolt Head-/Nut Design: Male Star | View on Amazon |
| FEL-PRO Fits: 2.4L L4 | ES72284 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 SOHC | GS33606 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set for 1 Cylinder Head Cylinder Head BoltSteel | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
9 Cylinder Head Bolt parts are listed for the 2020 Acura TLX, from FEL-PRO, APEX, ELRING and 3 other brands. FEL-PRO ES713291 carries the "Popular" badge.
This group includes FEL-PRO ES713291, AJUSA 81041700 and APEX AHB160 and the remaining parts above.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Popular Fits: 3.5L V6 SOHC | 55339 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.5L V6 SOHC | 55340 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 2.4L L4 | 10270700 | 🇺🇸 US 🇨🇦 CA | Multi Layered Steel | View on Amazon |
| APEX Fits: 3.5L V6 SOHC | AHG176L | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| APEX Fits: 3.5L V6 SOHC | AHG176R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| ELRING Fits: 2.4L L4 | 068470 | 🇺🇸 US 🇨🇦 CA | Material: MetaloflNumber of Layers: 3 | View on Amazon |
| ELRING Fits: 3.5L V6 SOHC | 948680 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| ELRING Fits: 3.5L V6 SOHC | 948720 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| FEL-PRO Fits: 3.5L V6 SOHC | 26858PT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | 55386 | 🇺🇸 US 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| ULTRA-POWER Fits: 3.5L V6 SOHC | 55339 | 🇺🇸 US 🇨🇦 CA | LeftMulti Layered Steel | View on Amazon |
| ULTRA-POWER Fits: 3.5L V6 SOHC | 55340 | 🇺🇸 US 🇨🇦 CA | RightMulti Layered Steel | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
12 Cylinder Head Gasket parts are listed for the 2020 Acura TLX, from MAHLE / CLEVITE, ELRING, APEX and 3 other brands. MAHLE / CLEVITE 55339 carries the "Popular" badge.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.4L L4 | 52631600 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 3.5L V6 SOHC | 52632000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Complete Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 SOHC | HS55339 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Valve Stem Seals | View on Amazon |
| TOPLINE Fits: 3.5L V6 SOHC | HSH52A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Valve Stem Seals | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
4 Cylinder Head Gasket Set parts are listed for the 2020 Acura TLX, from AJUSA, MAHLE / CLEVITE and TOPLINE.
This group includes AJUSA 52631600, AJUSA 52632000 and MAHLE / CLEVITE HS55339 and the remaining parts above.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KAT'S HEATERS Fits: 2.4L L4, 3.5L V6 SOHC | 28500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Heater Replacement Cord | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
This group shows a single part: KAT'S HEATERS 28500.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO Fits: 2.4L L4, 3.5L V6 SOHC | HO1228140 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left LowerMaterial: PE/Vacuum Form | View on Amazon |
| TECHPRO Fits: 2.4L L4, 3.5L V6 SOHC | HO1228141 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right LowerMaterial: PE/Vacuum Form | View on Amazon |
| VARIOUS MFR Fits: 3.5L V6 SOHC | HO1228140 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PerformanceMaterial: Polyethylene / Vacuum Form | View on Amazon |
This table covers the Engine covers.
3 Engine Cover parts are listed for the 2020 Acura TLX, from TECHPRO and VARIOUS MFR.
Listed part numbers: TECHPRO HO1228140 and TECHPRO HO1228141, plus the other parts above.
Engine Cover Grommet
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.5L V6 SOHC | 49932 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Engine Cover grommets.
This group shows a single part: DORMAN 49932.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.4L L4 | 50561800 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 3.5L V6 SOHC | 50561900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| TOPLINE Fits: 3.5L V6 SOHC | CGSH52A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Engine Kit Gasket Set parts are listed for the 2020 Acura TLX, from AJUSA and TOPLINE.
This group includes AJUSA 50561800, AJUSA 50561900 and TOPLINE CGSH52A.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.5L V6 SOHC | V0779 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | High Alloy Steel | View on Amazon |
| MELLING Fits: 3.5L V6 SOHC | V0779IN | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | High Temperature nickel Base Inconel | View on Amazon |
| QUALCAST Fits: 3.5L V6 SOHC | 1010779 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.181 Head Diameter. | View on Amazon |
| SBI Fits: 3.5L V6 SOHC | 10779 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE Fits: 3.5L V6 SOHC | EVAC9 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
5 Exhaust Valve parts for the 2020 Acura TLX come from 4 brands — MELLING, QUALCAST, SBI and 1 other brand. The "Popular" part is MELLING V0779.
This group includes MELLING V0779, MELLING V0779IN and QUALCAST 1010779 and the remaining parts above.
Fuel Pump Camshaft Follower
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 2.4L L4 | GDF101 | 🇺🇸 US 🇨🇦 CA | O.E.M. Replacement: Yes | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.5L V6 SOHC | GDF503 | 🇺🇸 US 🇨🇦 CA | AWD | View on Amazon |
| WELLS Fits: 2.4L L4 | 5T5001 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WELLS Fits: 3.5L V6 SOHC | 5T5002 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the followers that drive a mechanical fuel pump off the camshaft.
4 Fuel Pump Camshaft Follower parts are listed for the 2020 Acura TLX, from STANDARD MOTOR PRODUCTS and WELLS.
Part numbers include STANDARD MOTOR PRODUCTS GDF101, STANDARD MOTOR PRODUCTS GDF503 and WELLS 5T5001, among others listed above.
Harmonic Balancer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP Fits: 2.4L L4 | 102488 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ATP Fits: 3.5L V6 SOHC | 102367 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| DAYCO Fits: 3.5L V6 SOHC | PB1713N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Premium | View on Amazon |
| DORMAN Fits: 2.4L L4 | 594766 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
4 Harmonic Balancer parts are listed for the 2020 Acura TLX, from ATP, DAYCO and DORMAN.
This group includes ATP 102488, ATP 102367 and DAYCO PB1713N and the remaining parts above.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 2.4L L4 | MS97595 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.5L V6 SOHC | MS20320 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Layered Steel | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.5L V6 SOHC | MS20316 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered SteelSet | View on Amazon |
| AJUSA Fits: 2.4L L4 | 13340100 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 2.4L L4 | 13355100 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| APEX Fits: 3.5L V6 SOHC | AMS1762 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
| APEX Fits: 3.5L V6 SOHC | AMS1761 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| APEX Fits: 3.5L V6 SOHC | AMS1764 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| BECK/ARNLEY Fits: 3.5L V6 SOHC | 0376245 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| ELRING Fits: 2.4L L4 | 068630 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ELRING Fits: 3.5L V6 SOHC | 948770 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| ELRING Fits: 3.5L V6 SOHC | 948760 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | MS20297 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
13 Intake Manifold Gasket parts are listed for the 2020 Acura TLX, from MAHLE / CLEVITE, APEX, ELRING and 3 other brands. FEL-PRO MS97595 carries the "Popular" badge.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.5L V6 SOHC | V0336 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Stainless Steel | View on Amazon |
| ENGINETECH Fits: 2.4L L4 | IM1018 | 🇺🇸 US | .2154 stem1.4157" Head | View on Amazon |
| ENGINETECH Fits: 3.5L V6 SOHC | IM4476 | 🇺🇸 US | .2165 stem1.417 Head | View on Amazon |
| QUALCAST Fits: 2.4L L4, 3.5L V6 SOHC | 1013336 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.417 Head Diameter. | View on Amazon |
| SBI Fits: 2.4L L4, 3.5L V6 SOHC | 13336 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE Fits: 3.5L V6 SOHC | IVAC9M | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
6 Intake Valve parts for the 2020 Acura TLX come from 5 brands — ENGINETECH, MELLING, QUALCAST and 2 other brands. The "Popular" part is MELLING V0336.
Listed part numbers: MELLING V0336, ENGINETECH IM1018 and ENGINETECH IM4476, plus the other parts above.
Motor Mount
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 3.5L V6 SOHC | SKM9737 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| SKP Fits: 2.4L L4 | SKMA65040 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| SKP Fits: 2.4L L4 | SKM99548 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: 2.4L L4 | 9812 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| ANCHOR Popular Fits: 2.4L L4 | 9897 | 🇺🇸 US 🇨🇦 CA | RightHydraulic | View on Amazon |
| ANCHOR Popular Fits: 3.5L V6 SOHC | 9998 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightHydraulic | View on Amazon |
| ANCHOR Popular Fits: 3.5L V6 SOHC | 9696 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith Wire / Sensor | View on Amazon |
| DEA / MARMON RIDE CONTROL Popular Fits: 2.4L L4 | A65072 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| ANCHOR Fits: 2.4L L4 | 9842 | 🇺🇸 US 🇨🇦 CA | FrontHydraulic | View on Amazon |
| ANCHOR Fits: 3.5L V6 SOHC | 9737 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Frontwith Wire / Sensor | View on Amazon |
| BECK/ARNLEY Fits: 2.4L L4 | 1042371 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| BECK/ARNLEY Fits: 3.5L V6 SOHC | 1042430 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.4L L4, 3.5L V6 SOHC | A65144 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Right, Suspension Subframe Mount | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.4L L4, 3.5L V6 SOHC | A65143 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Left, Suspension Subframe Mount | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.4L L4 | A65040 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.4L L4 | A65054 | 🇺🇸 US 🇨🇦 CA | Front Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.5L V6 SOHC | A65105 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.5L V6 SOHC | A4575EL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontHydraulic | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.5L V6 SOHC | A65028EL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith Electrical Connector, Hydraulic Mount | View on Amazon |
| PIONEER Fits: 2.4L L4 | 609812 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| PIONEER Fits: 2.4L L4 | 619897 | 🇺🇸 US 🇨🇦 CA | Front Right | View on Amazon |
| PIONEER Fits: 3.5L V6 SOHC | 619998 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| WESTAR Fits: 3.5L V6 SOHC | EM7441 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| WESTAR Fits: 3.5L V6 SOHC | EM5875 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
24 Motor Mount parts for the 2020 Acura TLX come from 6 brands — DEA / MARMON RIDE CONTROL, ANCHOR, SKP and 3 other brands. The "Popular" part is SKP SKM9737.
The Economy section lists 3 options from SKP — the catalog's value-priced group. SKP SKM9737 is listed in this group.
In the Standard Replacement grade, DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 2 other brands supply 21 parts: built to original-equipment specification. A representative part number is ANCHOR 9812.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 3.5L V6 SOHC | 300478 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Motor Mount kits.
This group shows a single part: ANCHOR 300478.
Oil
Summary: Notes list SAE 0W-20. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include LIQUI MOLY, VALVOLINE and MOBIL.
Full Synthetic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY Popular Fits: 2.4L L4, 3.5L V6 SOHC | 22044 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-201 Liter | View on Amazon |
| LIQUI MOLY Popular Fits: 2.4L L4, 3.5L V6 SOHC | 20438 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 0W-205 Liter | View on Amazon |
| LIQUI MOLY Popular Fits: 2.4L L4, 3.5L V6 SOHC | 22046 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-205 Liter | View on Amazon |
| MOBIL Popular Fits: 2.4L L4, 3.5L V6 SOHC | 124184 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0W-20Mobil 1 Advanced Fuel Economy | View on Amazon |
| MOBIL Popular Fits: 2.4L L4, 3.5L V6 SOHC | 125197 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic 0W-20Mobil Full Synthetic | View on Amazon |
| VALVOLINE Popular Fits: 2.4L L4, 3.5L V6 SOHC | VV916 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 0W-201 Quart | View on Amazon |
| IDEMITSU Fits: 2.4L L4, 3.5L V6 SOHC | 30016051750 | 🇺🇸 US | IFG3 0W-20 SQ/GF-7A1 Quart | View on Amazon |
| IDEMITSU Fits: 2.4L L4, 3.5L V6 SOHC | 30016051953 | 🇺🇸 US | IFG3 0W-20 SQ/GF-7A5 Quart | View on Amazon |
| LIQUI MOLY Fits: 2.4L L4, 3.5L V6 SOHC | 2207 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special TEC AA 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 2.4L L4, 3.5L V6 SOHC | 20436 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 2.4L L4, 3.5L V6 SOHC | 20198 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec V 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 2.4L L4, 3.5L V6 SOHC | 20408 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec LR 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 2.4L L4, 3.5L V6 SOHC | 2208 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec AA 0W-205 Liter | View on Amazon |
| LIQUI MOLY Fits: 2.4L L4, 3.5L V6 SOHC | 20200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec V 0W-205 Liter | View on Amazon |
| LIQUI MOLY Fits: 2.4L L4, 3.5L V6 SOHC | 22190 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6610 0W-205 Liter | View on Amazon |
| LIQUI MOLY Fits: 2.4L L4, 3.5L V6 SOHC | 20410 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec LR 0W-205 Liter | View on Amazon |
| LIQUI MOLY Fits: 2.4L L4, 3.5L V6 SOHC | 22048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-2020 Liter | View on Amazon |
| LUCAS OIL Fits: 2.4L L4, 3.5L V6 SOHC | 10564 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FULL SYNTHETIC MOTOR OIL SAE 0W-201 qt | View on Amazon |
| LUCAS OIL Fits: 2.4L L4, 3.5L V6 SOHC | 18003 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic Motor Oil SAE 0W-206 Gallon | View on Amazon |
| MOBIL Fits: 2.4L L4, 3.5L V6 SOHC | 120926 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance 0W-20Mobil 1 Extended Performance | View on Amazon |
| PENTOSIN Fits: 2.4L L4, 3.5L V6 SOHC | 8044210 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0W-20-Pentospeed-DEXOS1 GEN31 Liter | View on Amazon |
| PENTOSIN Fits: 2.4L L4, 3.5L V6 SOHC | 8044317 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pento Speed FESAE 0W-20 | View on Amazon |
| PENTOSIN Fits: 2.4L L4, 3.5L V6 SOHC | 8044319 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pento Speed FESAE 0W-20 | View on Amazon |
| PENTOSIN Fits: 2.4L L4, 3.5L V6 SOHC | 8044212 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0W-20-Pentospeed-DEXOS1 GEN35 Liters | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.5L V6 SOHC | 891682 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Protection Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.5L V6 SOHC | 904536 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Restore & Protect Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.5L V6 SOHC | 904538 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Restore & Protect Full Synthetic SAE 0W-205 Quart | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.5L V6 SOHC | 881150 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 0W-20Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.5L V6 SOHC | 898664 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hybrid Vehicle Full Synthetic SAE 0W-205 Quart | View on Amazon |
High Mileage (>75,000 Miles)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Fits: 2.4L L4, 3.5L V6 SOHC | 125203 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage 0W-20Mobil Full Synthetic | View on Amazon |
| MOBIL Fits: 2.4L L4, 3.5L V6 SOHC | 122535 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | High Mileage 0W-20Mobil 1 High Mileage | View on Amazon |
| MOBIL Fits: 2.4L L4, 3.5L V6 SOHC | 123836 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance High Mileage 0W-20Extended Performance High Mileage Synthetic Motor Oil 0W-20, 1 Quart | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.5L V6 SOHC | 833002 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Max Life High Mileage SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.5L V6 SOHC | 852400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage with Max Life Technology SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.5L V6 SOHC | 881149 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Max Life High Mileage SAE 0W-20Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.5L V6 SOHC | 881168 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage with Max Life Technology SAE 0W-20Easy Pour 5 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
36 Oil parts for the 2020 Acura TLX come from 6 brands — LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 22044. Full Synthetic and High Mileage (>75,000 Miles) are all represented, and Full Synthetic alone accounts for 29 parts.
Oil Cooler Mounting Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HAYDEN Fits: 2.4L L4, 3.5L V6 SOHC | 238 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber Block Mounting Kit for Heavy Duty Oil Cooler | View on Amazon |
| HAYDEN Fits: 2.4L L4, 3.5L V6 SOHC | 153 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Metal Mounting Bracket Kit for Heavy Duty Oil Cooler | View on Amazon |
This table covers the Oil Cooler Mounting kits.
HAYDEN supplies both parts for the 2020 Acura TLX.
This group includes HAYDEN 238 and HAYDEN 153.
Oil Dipstick / Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTOTECNICA Fits: 2.4L L4 | HA1423352 | 🇺🇸 US 🇨🇦 CA | Dipstick Only | View on Amazon |
This table covers the Oil Dipstick tubes.
This group shows a single part: AUTOTECNICA HA1423352.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 2.4L L4, 3.5L V6 SOHC | 090033 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | StandardM14-1.50 | View on Amazon |
| DORMAN Popular Fits: 2.4L L4, 3.5L V6 SOHC | 090053 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | MetalPilot Point | View on Amazon |
| AGS Fits: 2.4L L4, 3.5L V6 SOHC | ODP00007 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M14x1.50 | View on Amazon |
| AGS Fits: 2.4L L4, 3.5L V6 SOHC | ODP00012 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M16x1.50 | View on Amazon |
| ELRING Fits: 2.4L L4, 3.5L V6 SOHC | 523500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Seal RingBolt Head-/Nut Design: Male Hex | View on Amazon |
| ELRING Fits: 2.4L L4, 3.5L V6 SOHC | 523480 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | without Seal RingThread Size: M14X1,5x15 | View on Amazon |
| REIN Fits: 2.4L L4, 3.5L V6 SOHC | HWU0110 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| SKP Fits: 2.4L L4, 3.5L V6 SOHC | SK090053CD | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Metal | View on Amazon |
This table covers the drain plugs in the oil pan.
8 Oil Drain Plug parts for the 2020 Acura TLX come from 5 brands — DORMAN, AGS, ELRING and 2 other brands. The "Popular" part is DORMAN 090033.
This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 2.4L L4, 3.5L V6 SOHC | 095144 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Aluminum | View on Amazon |
| FEL-PRO Popular Fits: 2.4L L4, 3.5L V6 SOHC | 73346 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0.570 (in) Inside Diameter x 0.860 (in) Outside DiameterFlat Washer | View on Amazon |
| AJUSA Fits: 2.4L L4, 3.5L V6 SOHC | 22007400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| APEX Fits: 2.4L L4, 3.5L V6 SOHC | ADP1909 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.4L L4, 3.5L V6 SOHC | 243600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: Aluminium | View on Amazon |
| ULTRA-POWER Fits: 2.4L L4, 3.5L V6 SOHC | 095015 | 🇺🇸 US 🇨🇦 CA | ID: 0.572"aluminum Gasket | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
6 Oil Drain Plug Gasket parts are listed for the 2020 Acura TLX, from DORMAN, FEL-PRO, AJUSA and 3 other brands. DORMAN 095144 carries the "Popular" badge.
This group includes DORMAN 095144, FEL-PRO 73346 and AJUSA 22007400 and the remaining parts above.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CALORSTAT Fits: 2.4L L4, 3.5L V6 SOHC | OC2335 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Round with Handlewith OE No. 15610REZA00 | View on Amazon |
| GATES Fits: 2.4L L4, 3.5L V6 SOHC | 31284 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOTORAD Fits: 2.4L L4, 3.5L V6 SOHC | MO159 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the caps on the oil filler neck.
3 Oil Filler Cap parts for the 2020 Acura TLX come from 3 brands — CALORSTAT, GATES and MOTORAD.
This group includes CALORSTAT OC2335, GATES 31284 and MOTORAD MO159.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Fits: 2.4L L4, 3.5L V6 SOHC | 72226WS | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Workshop Oil Filter | View on Amazon |
| FVP Fits: 2.4L L4, 3.5L V6 SOHC | R7356 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE# 15400-PLM-A02 | View on Amazon |
| PRO-TEC Fits: 2.4L L4, 3.5L V6 SOHC | PXL57356 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VAICO Fits: 3.5L V6 SOHC | V240018 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Screwithoutn Filter | View on Amazon |
| VARIOUS MFR Fits: 2.4L L4, 3.5L V6 SOHC | PG4612 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: 2.4L L4, 3.5L V6 SOHC | PO4610HN1 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Style | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: 2.4L L4, 3.5L V6 SOHC | M1110A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance | View on Amazon |
| WIX Popular Fits: 2.4L L4, 3.5L V6 SOHC | 57356XP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Popular Fits: 2.4L L4, 3.5L V6 SOHC | 3323 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Premium Oil Filter | View on Amazon |
| WIX Popular Fits: 2.4L L4, 3.5L V6 SOHC | 57356 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ACKOJA Fits: 2.4L L4, 3.5L V6 SOHC | A260500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with OE No. 15400RTA003 | View on Amazon |
| BECK/ARNLEY Fits: 2.4L L4, 3.5L V6 SOHC | 0410812 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HASTINGS / BALDWIN Fits: 2.4L L4, 3.5L V6 SOHC | LF240 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HENGST Fits: 2.4L L4, 3.5L V6 SOHC | H97W05 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Filter Type: Spin-On | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4, 3.5L V6 SOHC | OC707 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spin-On86.00mm Height | View on Amazon |
| MANN Fits: 2.4L L4, 3.5L V6 SOHC | W6103 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Anti-Drain Back Valve: NoHeight: 3.54 In | View on Amazon |
| MOTORCRAFT Fits: 2.4L L4, 3.5L V6 SOHC | FL816 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthetic Oil Application | View on Amazon |
| VARIOUS MFR Fits: 2.4L L4, 3.5L V6 SOHC | PG4612EX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
18 Oil Filter parts for the 2020 Acura TLX come from 14 brands — VARIOUS MFR, BOSCH, WIX and 11 other brands. The "Popular" part is MOBIL M1110A.
The Economy section: 6 options from VARIOUS MFR, BOSCH, FVP and 2 other brands. BOSCH 72226WS is listed in this group.
The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1110A is listed in this group.
Standard Replacement: 10 parts, from BOSCH, WIX, ACKOJA and 7 other brands. A representative part number is BOSCH 3323.
Oil Filter Adapter Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.4L L4 | ES72748 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO Fits: 3.5L V6 SOHC | ES74047 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.5L V6 SOHC | B33360 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Oil Filter Adapter GasketMolded Rubber | View on Amazon |
This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
3 Oil Filter Adapter Gasket / O-Ring parts are listed for the 2020 Acura TLX, from FEL-PRO and MAHLE / CLEVITE.
This group includes FEL-PRO ES72748, FEL-PRO ES74047 and MAHLE / CLEVITE B33360.
Oil Filter Support Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTOTECNICA Fits: 2.4L L4, 3.5L V6 SOHC | HA1416938 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Oil Filter Support tubes.
One part is listed for the 2020 Acura TLX — AUTOTECNICA HA1416938.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ULTRA-POWER Popular Fits: 2.4L L4 | 264856 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ATP Fits: 2.4L L4 | 103675 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DORMAN Fits: 2.4L L4 | 264856 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Fits: 2.4L L4 | SK264856 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SPECTRA PREMIUM Fits: 2.4L L4 | HOP26A | 🇺🇸 US 🇨🇦 CA | GASKET AND/OR SEALANT NOT INCLUDED | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
5 Oil Pan parts are listed for the 2020 Acura TLX, from ULTRA-POWER, ATP, DORMAN and 2 other brands. ULTRA-POWER 264856 carries the "Popular" badge.
Part numbers include ULTRA-POWER 264856 and ATP 103675, among others listed above.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ Fits: 2.4L L4, 3.5L V6 SOHC | 703141410 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RTV Silicone | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: VICTOR REINZ 703141410.
Oil Pressure Sender / Switch Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.4L L4, 3.5L V6 SOHC | 73196 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Variable Valve Timing (VVT) Oil Pressure Switch | View on Amazon |
This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: FEL-PRO 73196.
Oil Pump
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.5L V6 SOHC | EPK200 | 🇺🇸 US | 'Pressure King' Value Line Pump | View on Amazon |
| SKP Fits: 3.5L V6 SOHC | SKM569 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard Volume and Pressure | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.5L V6 SOHC | M569 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACKOJA Fits: 2.4L L4 | A260274 | 🇺🇸 US 🇨🇦 CA | with OE No. 151005A2A03 | View on Amazon |
| ACKOJA Fits: 3.5L V6 SOHC | A260420 | 🇺🇸 US 🇨🇦 CA | with OE No. 151005G0A01 | View on Amazon |
| TOPLINE Fits: 3.5L V6 SOHC | OPH52 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit | View on Amazon |
This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.
6 Oil Pump parts for the 2020 Acura TLX come from 5 brands — ACKOJA, ENGINETECH, SKP and 2 other brands. The "Popular" part is MELLING M569.
The Economy section: 2 options from ENGINETECH and SKP. ENGINETECH EPK200 is listed in this group.
Standard Replacement: 1 part, from MELLING. A representative part number is MELLING M569.
3 further parts sit outside the graded sections, with the same engine-level match.
Listed part numbers: MELLING M569, ENGINETECH EPK200 and SKP SKM569, plus the other parts above.
Oil Pump Chain
Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| INA Fits: 2.4L L4 | ZC0129 | 🇺🇸 US 🇨🇦 CA | Kit Contains 1 Chain, 1 Balance Shaft Sprocket, 1 TensionerOil Pump Drive Set | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | C931 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the chains that drive the oil pump.
2 Oil Pump Chain parts are listed for the 2020 Acura TLX, from INA and CLOYES.
In the Kit grade, INA supplies 1 part: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is INA ZC0129.
The Standard Replacement section: 1 option from CLOYES. CLOYES C931 is listed in this group.
This group includes INA ZC0129 and CLOYES C931.
Oil Pump Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.5L V6 SOHC | 01130500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 3.5L V6 SOHC | 967650 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Side | View on Amazon |
This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pump Gasket parts are listed for the 2020 Acura TLX, from AJUSA and ELRING.
Listed part numbers: AJUSA 01130500 and ELRING 967650.
Piston
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.5L V6 SOHC | P3552 | 🇺🇸 US | Coated SkirtDome Top | View on Amazon |
| ENGINETECH Fits: 3.5L V6 SOHC | K35526P | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Coated SkirtDome Top | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOPLINE Fits: 3.5L V6 SOHC | PAH52A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Rings | View on Amazon |
This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.
3 Piston parts are listed for the 2020 Acura TLX, from ENGINETECH and TOPLINE.
The Premium section lists 2 options from ENGINETECH — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH P3552 is listed in this group.
The Standard Replacement section: 1 option from TOPLINE. TOPLINE PAH52A is listed in this group.
Listed part numbers: ENGINETECH P3552, ENGINETECH K35526P and TOPLINE PAH52A.
Piston Ring
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.5L V6 SOHC | C35046 | 🇺🇸 US | PremiumSet | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOPLINE Fits: 3.5L V6 SOHC | RSH52A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
2 Piston Ring parts are listed for the 2020 Acura TLX, from ENGINETECH and TOPLINE.
The Premium section: 1 option from ENGINETECH. ENGINETECH C35046 is listed in this group.
The Standard Replacement section: 1 option from TOPLINE. TOPLINE RSH52A is listed in this group.
Listed part numbers: ENGINETECH C35046 and TOPLINE RSH52A.
Thrust Washer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.4L L4 | TW1536 | 🇺🇸 US | (Size: Standard) | View on Amazon |
This table covers the Thrust washers.
This group shows a single part: ENGINETECH TW1536.
Timing Belt
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.5L V6 SOHC | B329 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BANDO Popular Fits: 3.5L V6 SOHC | TB329 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GATES Popular Fits: 3.5L V6 SOHC | T329 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Power Grip | View on Amazon |
| ACDELCO Fits: 3.5L V6 SOHC | TB329 | 🇺🇸 US 🇨🇦 CA | Professional / Gold | View on Amazon |
| CONTINENTAL Fits: 3.5L V6 SOHC | 40329 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Import | View on Amazon |
| DAYCO Fits: 3.5L V6 SOHC | 95329 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Camshaft | View on Amazon |
This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off.
6 Timing Belt parts are listed for the 2020 Acura TLX, from CLOYES, BANDO, GATES and 3 other brands. BANDO TB329 carries the "Popular" badge.
Economy: 1 part, from CLOYES. A representative part number is CLOYES B329.
The Standard Replacement section: 5 options from BANDO, GATES, ACDELCO and 2 other brands. BANDO TB329 is listed in this group.
This group includes BANDO TB329, CLOYES B329 and GATES T329 and the remaining parts above.
Timing Belt & Component Kit
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CONTINENTAL Popular Fits: 3.5L V6 SOHC | GTKWP329 | 🇺🇸 US 🇨🇦 CA | Black SeriesIncludes Aluminum Hydraulic Tensioner | View on Amazon |
| CLOYES Fits: 3.5L V6 SOHC | BK329A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AISIN Popular Fits: 3.5L V6 SOHC | TKH002 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit Contains Japan or US Manufactured Water Pump | View on Amazon |
| CONTINENTAL Popular Fits: 3.5L V6 SOHC | PP329LK2 | 🇺🇸 US 🇨🇦 CA | Pro Series PLUSIncludes hydraulic tensioner and seals | View on Amazon |
| AISIN Fits: 3.5L V6 SOHC | TKH002KR | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit Contains Korean Manufactured Water Pump | View on Amazon |
| CONTINENTAL Fits: 3.5L V6 SOHC | TB329K1 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit | View on Amazon |
| CONTINENTAL Fits: 3.5L V6 SOHC | TB329LK2 | 🇺🇸 US 🇨🇦 CA | Pro SeriesDoes Not include seals | View on Amazon |
| GATES Fits: 3.5L V6 SOHC | TCK329A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Power Grip | View on Amazon |
| GATES Fits: 3.5L V6 SOHC | TCKWP329A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Power Gripwith Water Pump | View on Amazon |
| GMB Fits: 3.5L V6 SOHC | 34352329 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Water Pump | View on Amazon |
| INA Fits: 3.5L V6 SOHC | ZBBK329 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit | View on Amazon |
| US MOTOR WORKS Fits: 3.5L V6 SOHC | USTK329 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Timing Belt & component kits.
12 Timing Belt & Component Kit parts for the 2020 Acura TLX come from 7 brands — CONTINENTAL, AISIN, GATES and 4 other brands. The "Popular" part is CONTINENTAL GTKWP329.
The Economy section: 2 options from CONTINENTAL and CLOYES. CONTINENTAL GTKWP329 is listed in this group.
Standard Replacement: 10 parts, from CONTINENTAL, AISIN, GATES and 3 other brands. A representative part number is AISIN TKH002.
Timing Belt Pulley
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.5L V6 SOHC | 95508 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Timing Belt pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt.
This group shows a single part: CLOYES 95508.
Timing Belt Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AISIN Popular Fits: 3.5L V6 SOHC | BTH001 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hydraulic Assembly | View on Amazon |
| GMB Popular Fits: 3.5L V6 SOHC | 4355767 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hydraulic Assembly | View on Amazon |
| ACDELCO Fits: 3.5L V6 SOHC | T43129 | 🇺🇸 US 🇨🇦 CA | Professional / GoldHydraulic Assembly | View on Amazon |
| CLOYES Fits: 3.5L V6 SOHC | 96187 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| DAYCO Fits: 3.5L V6 SOHC | 85067 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hydraulic Assembly | View on Amazon |
| GATES Fits: 3.5L V6 SOHC | T43129 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hydraulic AssemblyNo Pulley Attached | View on Amazon |
| GATES Fits: 3.5L V6 SOHC | T41330 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GMB Fits: 3.5L V6 SOHC | 4359390 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ULTRA-POWER Fits: 3.5L V6 SOHC | T41330 | 🇺🇸 US 🇨🇦 CA | Interference EngineTiming Belt | View on Amazon |
This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
9 Timing Belt Tensioner parts for the 2020 Acura TLX come from 7 brands — GMB, GATES, AISIN and 4 other brands. The "Popular" part is AISIN BTH001.
Part numbers include AISIN BTH001, GMB 4355767 and ACDELCO T43129, among others listed above.
Timing Cam Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | S1112 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| S.A. GEAR Fits: 2.4L L4 | S1429 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
This table covers the Timing Cam sprockets.
2 Timing Cam Sprocket parts for the 2020 Acura TLX come from 2 brands — CLOYES and S.A. GEAR.
Listed part numbers: CLOYES S1112 and S.A. GEAR S1429.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | C930 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 2.4L L4 | C1148 | 🇺🇸 US 🇨🇦 CA | PRIMARY | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
2 Timing Chain parts are listed for the 2020 Acura TLX, from CLOYES and S.A. GEAR.
Part numbers include CLOYES C930 and S.A. GEAR C1148.
Timing Chain & Component Kit
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| S.A. GEAR Popular Fits: 2.4L L4 | 76385 | 🇺🇸 US 🇨🇦 CA | Includes Balance Shaft Sprocket, Camshaft Sprocket, 2 Chains, Crank Sprocket, 2 Guides, 2 Tensioner Arms, 2 Tensioners | View on Amazon |
| GATES Fits: 2.4L L4 | CHK132 | 🇺🇸 US 🇨🇦 CA | Includes 2 Timing Chains, 2 Tensioners, 4 Guides, 3 Sprockets | View on Amazon |
| S.A. GEAR Fits: 2.4L L4 | 76385T | 🇺🇸 US 🇨🇦 CA | Includes Camshaft Sprocket, Chain, Crank Sprocket, 2 Guides, 2 Tensioner Arms, Tensioner | View on Amazon |
| S.A. GEAR Fits: 2.4L L4 | 76385S | 🇺🇸 US 🇨🇦 CA | Does Not Include SprocketsIncludes 2 Chains, 2 Guides, 2 Tensioner Arms, 2 Tensioners | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 2.4L L4 | 90930SX | 🇺🇸 US 🇨🇦 CA | Does Not Include SprocketsIncludes: Timing Chain (2), Timing Chain Tensioner (2), Timing Chain Guide (2), Timing Chain Tensioner Guide (2), Crankshaft Sprocket (2), Camshaft Sprocket (2) | View on Amazon |
| CLOYES Fits: 2.4L L4 | 90930S | 🇺🇸 US 🇨🇦 CA | Includes: Timing Chain, Oil Pump Chain, Timing Chain Tensioner, Balance Shaft Tensioner Guide, Chain Guide (2), Crankshaft Sprocket, Camshaft Sprocket, Balance Shaft Sprocket | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
6 Timing Chain & Component Kit parts for the 2020 Acura TLX come from 3 brands — S.A. GEAR, CLOYES and GATES. The "Popular" part is S.A. GEAR 76385.
The Economy section: 4 options from S.A. GEAR and GATES. S.A. GEAR 76385 is listed in this group.
Standard Replacement: 2 parts, from CLOYES. A representative part number is CLOYES 90930SX.
Part numbers include S.A. GEAR 76385, GATES CHK132 and S.A. GEAR 76385T, among others listed above.
Timing Chain Guide / Damper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| S.A. GEAR Popular Fits: 2.4L L4 | 71219 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| S.A. GEAR Popular Fits: 2.4L L4 | 91290 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmRight Only | View on Amazon |
| CLOYES Fits: 2.4L L4 | 95991 | 🇺🇸 US 🇨🇦 CA | Timing Chain Tensioner Lever | View on Amazon |
| CLOYES Fits: 2.4L L4 | 95993 | 🇺🇸 US 🇨🇦 CA | Guide | View on Amazon |
| CLOYES Fits: 2.4L L4 | 95992 | 🇺🇸 US 🇨🇦 CA | Guide | View on Amazon |
| CLOYES Fits: 2.4L L4 | 95990 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmRight | View on Amazon |
| S.A. GEAR Fits: 2.4L L4 | 71218 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| S.A. GEAR Fits: 2.4L L4 | 91289 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmArm | View on Amazon |
This table covers the guides and dampers that keep the timing chain on its path.
8 Timing Chain Guide / Damper parts are listed for the 2020 Acura TLX, from S.A. GEAR and CLOYES. S.A. GEAR 71219 carries the "Popular" badge.
Part numbers include S.A. GEAR 71219, S.A. GEAR 91290 and CLOYES 95991, among others listed above.
Timing Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | 95988 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 2.4L L4 | BT7057 | 🇺🇸 US 🇨🇦 CA | Tensioner Oil Filter Included | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 2.4L L4 | T60310 | 🇺🇸 US 🇨🇦 CA | Tensioner Oil Filter Not Included | View on Amazon |
| S.A. GEAR Fits: 2.4L L4 | 91288 | 🇺🇸 US 🇨🇦 CA | PRIMARY | View on Amazon |
This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
4 Timing Chain Tensioner parts for the 2020 Acura TLX come from 4 brands — CLOYES, MELLING, PREFERRED COMPONENTS INC and 1 other brand.
Listed part numbers: CLOYES 95988, MELLING BT7057 and PREFERRED COMPONENTS INC T60310, plus the other parts above.
Timing Cover Dust Seal Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 3.5L V6 SOHC | JV5273 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Timing Cover Dust Seal KitMolded Rubber | View on Amazon |
This table covers the Timing Cover Dust Seal sets.
This group shows a single part: MAHLE / CLEVITE JV5273.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.4L L4, 3.5L V6 SOHC | 114490 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Fits: 2.4L L4 | TCS46306 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Timing Cover Gasket parts for the 2020 Acura TLX come from 2 brands — ELRING and FEL-PRO.
Listed part numbers: ELRING 114490 and FEL-PRO TCS46306.
Timing Cover Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: 2.4L L4 | 99182 | 🇺🇸 US 🇨🇦 CA | Shaft Diameter: 1.693 In | View on Amazon |
| SKF Fits: 3.5L V6 SOHC | 99169 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Shaft Diameter: 1.654 In | View on Amazon |
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: 2.4L L4 | 16896 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKF Fits: 3.5L V6 SOHC | 16473 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VICTOR REINZ Fits: 2.4L L4 | 815380700 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Timing Cover Seal parts for the 2020 Acura TLX come from 2 brands — SKF and VICTOR REINZ.
Part numbers include SKF 16896, SKF 16473 and VICTOR REINZ 815380700.
Timing Crank Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | S1115 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 2.4L L4 | S1430 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the crankshaft sprockets that drive the timing chain or belt.
2 Timing Crank Sprocket parts for the 2020 Acura TLX come from 2 brands — CLOYES and S.A. GEAR.
Listed part numbers: CLOYES S1115 and S.A. GEAR S1430.
Timing Idler
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.5L V6 SOHC, 2.4L L4 | 15011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| CLOYES Fits: 3.5L V6 SOHC | 95509 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GATES Fits: 3.5L V6 SOHC | T41232 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Timing Belt PulleySteel Smooth/Backside (55mm x 19mm x 24mm) | View on Amazon |
| GMB Fits: 3.5L V6 SOHC | 4359730 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ULTRA-POWER Fits: 3.5L V6 SOHC | T41232 | 🇺🇸 US 🇨🇦 CA | Timing Idler or PulleyIdler | View on Amazon |
This table covers the Timing idlers. Typical signs include a chirp that follows engine speed, or an idler that feels rough or has play. Replace a noisy idler with the belt — the labor is already paid for.
5 Timing Idler parts for the 2020 Acura TLX come from 5 brands — DORMAN, CLOYES, GATES and 2 other brands. The "Popular" part is DORMAN 15011.
This group includes DORMAN 15011, CLOYES 95509 and GATES T41232 and the remaining parts above.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY Popular Fits: 2.4L L4 | 0360046 | 🇺🇸 US 🇨🇦 CA | Includes Valve Cover Gasket, Spark Plug Tube Seals, and Small Seal | View on Amazon |
| ACKOJA Fits: 2.4L L4 | A260449 | 🇺🇸 US 🇨🇦 CA | with OE No. 12310RDFA01 | View on Amazon |
| AUTOTECNICA Fits: 3.5L V6 SOHC | HA1423912 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| AUTOTECNICA Fits: 3.5L V6 SOHC | HA1423913 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| DORMAN Fits: 2.4L L4 | 263241 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Fits: 2.4L L4 | SK510A19 | 🇺🇸 US 🇨🇦 CA | Includes Valve Cover Gasket, Spark Plug Tube Seals, and Small SealPlastic | View on Amazon |
| SKP Fits: 2.4L L4 | SK12310 | 🇺🇸 US 🇨🇦 CA | Includes Valve Cover Gasket, Spark Plug Tube Seals, and Small Seal | View on Amazon |
This table covers the Valve covers.
7 Valve Cover parts are listed for the 2020 Acura TLX, from AUTOTECNICA, SKP, BECK/ARNLEY and 2 other brands. BECK/ARNLEY 0360046 carries the "Popular" badge.
Listed part numbers: BECK/ARNLEY 0360046, ACKOJA A260449 and AUTOTECNICA HA1423912, plus the other parts above.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 3.5L V6 SOHC | AVC176S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Grommets & Spark Plug Tube Seals | View on Amazon |
| BECK/ARNLEY Popular Fits: 2.4L L4 | 0362089 | 🇺🇸 US 🇨🇦 CA | Includes Small Seal | View on Amazon |
| BECK/ARNLEY Popular Fits: 3.5L V6 SOHC | 0362072 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes spark plug tube seals and grommets | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 2.4L L4 | VS50916 | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
| AJUSA Fits: 2.4L L4 | 56094100 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 3.5L V6 SOHC | AVC176R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Grommets & Spark Plug Tube Seals | View on Amazon |
| APEX Fits: 3.5L V6 SOHC | AVC176L | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Grommets & Spark Plug Tube Seals | View on Amazon |
| BECK/ARNLEY Fits: 3.5L V6 SOHC | 0362054 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes spark plug tube seals and grommets | View on Amazon |
| BECK/ARNLEY Fits: 3.5L V6 SOHC | 0362055 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes spark plug tube seals and grommets | View on Amazon |
| ELRING Fits: 2.4L L4 | 068580 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ELRING Fits: 2.4L L4 | 110390 | 🇺🇸 US 🇨🇦 CA | without Cylinder Head Cover Gasket | View on Amazon |
| ELRING Fits: 2.4L L4 | 110570 | 🇺🇸 US 🇨🇦 CA | Material: Multiple | View on Amazon |
| ELRING Fits: 3.5L V6 SOHC | 585660 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| FEL-PRO Fits: 2.4L L4 | VS50953R1 | 🇺🇸 US 🇨🇦 CA | Does not include Spark Plug Tube Seals | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.5L V6 SOHC | 0930003 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 2.4L L4 | VS50887 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 SOHC | VS50881SL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 SOHC | VS50881SR | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molded Rubber | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
18 Valve Cover Gasket parts for the 2020 Acura TLX come from 7 brands — BECK/ARNLEY, MAHLE / CLEVITE, ELRING and 4 other brands. The "Popular" part is APEX AVC176S.
Valve Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SBI Popular Fits: 3.5L V6 SOHC, 2.4L L4 | 1408157 | 🇺🇸 US 🇨🇦 CA | Exhaust0.2173 I.D. | View on Amazon |
| QUALCAST Fits: 2.4L L4, 3.5L V6 SOHC | 308157 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust2.130 Overall Length. 0.436 Outside Diameter | View on Amazon |
| QUALCAST Fits: 2.4L L4 | 308158 | 🇺🇸 US 🇨🇦 CA | Intake1.875 OAL. 0.436 O.D. Incl. Lock Ring | View on Amazon |
| SBI Fits: 2.4L L4, 3.5L V6 SOHC | 1408158 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2173 I.D. | View on Amazon |
| TOPLINE Fits: 3.5L V6 SOHC | EVGH21 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| TOPLINE Fits: 3.5L V6 SOHC | IVGH21 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.
6 Valve Guide parts for the 2020 Acura TLX come from 3 brands — SBI, QUALCAST and TOPLINE. The "Popular" part is SBI 1408157.
Listed part numbers: SBI 1408157, QUALCAST 308157 and QUALCAST 308158, plus the other parts above.
Valve Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 2.4L L4 | VS2503 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| MELLING Fits: 3.5L V6 SOHC | VS2501 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| MELLING Fits: 3.5L V6 SOHC | VS2502 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
MELLING supplies the 3 Valve Spring parts for the 2020 Acura TLX.
Listed part numbers: MELLING VS2503, MELLING VS2501 and MELLING VS2502.
Valve Spring Retainer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 2.4L L4 | VSR731 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 3.5L V6 SOHC | VSR730 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Valve Spring retainers.
MELLING supplies both parts for the 2020 Acura TLX.
Listed part numbers: MELLING VSR731 and MELLING VSR730.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 2.4L L4, 3.5L V6 SOHC | VL1060 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Valve Stem Diameter: 0.215 in | View on Amazon |
| QUALCAST Fits: 2.4L L4, 3.5L V6 SOHC | 345008 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1 Round Groove. 0.215 Stem DIA. | View on Amazon |
| SBI Fits: 2.4L L4, 3.5L V6 SOHC | 1211060 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2190 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
3 Valve Spring Retainer Keeper parts are listed for the 2020 Acura TLX, from MELLING, QUALCAST and SBI.
Listed part numbers: MELLING VL1060, QUALCAST 345008 and SBI 1211060.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.4L L4 | S592V | 🇺🇸 US | VitonIntake and Exhaust | View on Amazon |
| FEL-PRO Popular Fits: 2.4L L4 | SS702831 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO Popular Fits: 3.5L V6 SOHC | SS702832 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.5L V6 SOHC | SS45627 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMetal with Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.5L V6 SOHC | SS45626 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMetal with Molded Rubber | View on Amazon |
| AJUSA Fits: 2.4L L4 | 57030200 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 2.4L L4 | AVS1003 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| APEX Fits: 3.5L V6 SOHC | AVS1028 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| ELRING Fits: 2.4L L4, 3.5L V6 SOHC | 130860 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Colour: BlackMaterial: FPM (fluoride rubber) | View on Amazon |
| ELRING Fits: 2.4L L4 | 084300 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| ELRING Fits: 2.4L L4, 3.5L V6 SOHC | 130560 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Colour: GreenHeight [MM]: 10 | View on Amazon |
| ELRING Fits: 3.5L V6 SOHC | 427370 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| QUALCAST Fits: 2.4L L4, 3.5L V6 SOHC | 3859255 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Viton Metal Clad | View on Amazon |
| SBI Fits: 2.4L L4, 3.5L V6 SOHC | 1221202 | 🇺🇸 US 🇨🇦 CA | ExhaustViton Material | View on Amazon |
| SBI Fits: 2.4L L4, 3.5L V6 SOHC | 1221201 | 🇺🇸 US 🇨🇦 CA | IntakeViton Material | View on Amazon |
| TOPLINE Fits: 3.5L V6 SOHC | VSSH21 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
16 Valve Stem Seal parts for the 2020 Acura TLX come from 9 brands — ELRING, FEL-PRO, MAHLE / CLEVITE and 6 other brands. The "Popular" part is ENGINETECH S592V.
Variable Valve Timing (VVT) Solenoid / Actuator
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 2.4L L4 | 918077 | 🇺🇸 US 🇨🇦 CA | VTC Oil Control Valve | View on Amazon |
| DORMAN Popular Fits: 2.4L L4 | 916985 | 🇺🇸 US 🇨🇦 CA | Spool Valve Assembly | View on Amazon |
| DORMAN Popular Fits: 3.5L V6 SOHC | 918075 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontSpool Valve Assembly | View on Amazon |
| ULTRA-POWER Popular Fits: 3.5L V6 SOHC | 918075 | 🇺🇸 US 🇨🇦 CA | FrontSPOOL VALVE ASSY | View on Amazon |
| GATES Fits: 2.4L L4 | VVS340 | 🇺🇸 US 🇨🇦 CA | Spool Valve | View on Amazon |
| GATES Fits: 2.4L L4 | VVS151 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GATES Fits: 3.5L V6 SOHC | VVS303 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spool Valve (Front Head) | View on Amazon |
| HOLSTEIN Fits: 2.4L L4 | 2VTS0138 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| HOLSTEIN Fits: 3.5L V6 SOHC | 2VTS0139 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Frontwith Spool Valve | View on Amazon |
| HOLSTEIN Fits: 3.5L V6 SOHC | 2VTS0140 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith Spool Valve | View on Amazon |
| ROSTRA Fits: 2.4L L4 | 790129 | 🇺🇸 US 🇨🇦 CA | Solenoid only | View on Amazon |
| ROSTRA Fits: 3.5L V6 SOHC | 790143 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| WALKER PRODUCTS Fits: 2.4L L4 | 5901136 | 🇺🇸 US 🇨🇦 CA | Includes Oil Control Valve | View on Amazon |
| WALKER PRODUCTS Fits: 3.5L V6 SOHC | 5901137 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
| WELLS Fits: 2.4L L4 | 2T1142 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WELLS Fits: 3.5L V6 SOHC | 2T1143 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
| WELLS Fits: 3.5L V6 SOHC | 2T1144 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACKOJA Popular Fits: 2.4L L4 | A260230 | 🇺🇸 US 🇨🇦 CA | with OE No. 158305A2A01 | View on Amazon |
| STANDARD MOTOR PRODUCTS Popular Fits: 3.5L V6 SOHC | VVT238 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| ACKOJA Fits: 3.5L V6 SOHC | A260030 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Oil Control | View on Amazon |
| BECK/ARNLEY Fits: 2.4L L4 | 0241978 | 🇺🇸 US 🇨🇦 CA | Includes Oil Control Valve | View on Amazon |
| CLOYES Fits: 2.4L L4 | VTS197 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 2.4L L4 | VTS202 | 🇺🇸 US 🇨🇦 CA | Spool Valve | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 2.4L L4 | VVT221 | 🇺🇸 US 🇨🇦 CA | Solenoid only | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 2.4L L4 | VVT305 | 🇺🇸 US 🇨🇦 CA | Spool Valve Assembly | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.5L V6 SOHC | VVT236 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
26 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2020 Acura TLX come from 11 brands — STANDARD MOTOR PRODUCTS, DORMAN, GATES and 8 other brands. The "Popular" part is DORMAN 918077. Grades run from Economy through Standard Replacement; Economy is the most populated section, led by DORMAN, GATES, HOLSTEIN and 4 other brands.
Variable Valve Timing (VVT) Solenoid Filter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.4L L4 | 00976700C | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 2.4L L4 | 00976400C | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| BECK/ARNLEY Fits: 2.4L L4 | 0396628 | 🇺🇸 US 🇨🇦 CA | Dual Clutch TransmissionVTEC Solenoid Gasket | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | B33314 | 🇺🇸 US 🇨🇦 CA | Variable Valve Timing (VVT) Solenoid GasketMolded Rubber | View on Amazon |
This table covers the Variable Valve Timing (VVT) Solenoid filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for.
4 Variable Valve Timing (VVT) Solenoid Filter parts for the 2020 Acura TLX come from 3 brands — AJUSA, BECK/ARNLEY and MAHLE / CLEVITE.
This group includes AJUSA 00976700C, AJUSA 00976400C and BECK/ARNLEY 0396628 and the remaining parts above.
Variable Valve Timing (VVT) Solenoid Gasket / Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.4L L4 | 00976400 | 🇺🇸 US 🇨🇦 CA | O-ring gasket | View on Amazon |
| ELRING Fits: 2.4L L4 | 114800 | 🇺🇸 US 🇨🇦 CA | FrontAdjuster Seal | View on Amazon |
| ELRING Fits: 2.4L L4 | 115310 | 🇺🇸 US 🇨🇦 CA | Includes Strainer | View on Amazon |
| ELRING Fits: 3.5L V6 SOHC | 464360 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Strainer | View on Amazon |
This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Variable Valve Timing (VVT) Solenoid Gasket / Seal parts are listed for the 2020 Acura TLX, from ELRING and AJUSA.
Part numbers include AJUSA 00976400, ELRING 114800 and ELRING 115310, among others listed above.
Variable Valve Timing (VVT) Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACKOJA Fits: 2.4L L4 | A260298 | 🇺🇸 US 🇨🇦 CA | Number of Teeth: 46with OE No. 143105A2A01 | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 2.4L L4 | VVT654 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
This table covers the cam phaser sprockets used by the variable-valve-timing system.
2 Variable Valve Timing (VVT) Sprocket parts for the 2020 Acura TLX come from 2 brands — ACKOJA and STANDARD MOTOR PRODUCTS.
Part numbers include ACKOJA A260298 and STANDARD MOTOR PRODUCTS VVT654.
Variable Valve Timing (VVT) Sprocket Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | VCB132 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Variable Valve Timing (VVT) Sprocket bolts.
One part is listed for the 2020 Acura TLX — CLOYES VCB132.
Buying Engine Parts for a 2020 Acura TLX
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil and Crankshaft Seal .
Frequently Asked Questions
How many engine parts fit the 2020 Acura TLX?
Our catalog currently lists 403 engine parts for the 2020 Acura TLX across 68 subcategories and 68 brands, covering all 3 engine options (2.4L L4, 3.5L V6 DOHC and 3.5L V6 SOHC). Each part is matched to the engine(s) it fits.
Do engine parts differ between 2020 Acura TLX engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2020 Acura TLX?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2020 Acura TLX?
Oil rows on this page include SAE 0W-20. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2020 Acura TLX was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2020 Acura TLX?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2020 Acura TLX
Engine Parts for Other Acura TLX Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.