This page lists 233 engine parts for the 2022 Acura MDX, across 47 part types, covering both the 3.0L V6 Turbocharged and the 3.5L V6. Every part shows its brand, manufacturer part number and fitment notes.
On the 2022 Acura MDX, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 69 parts of the 233 listed are Oil (38 parts), Oil Filter (18 parts) and Timing Belt & Component Kit (13 parts). The other 44 part types cover the remaining 164 parts.
The 2022 Acura MDX was sold with both the 3.0L V6 Turbocharged and the 3.5L V6. 79 parts fit every engine; the other 154 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2022 Acura MDX engine parts are AJUSA (24 parts), ELRING (18 parts) and TOPLINE (15 parts), plus 53 more brands. Quality grades include Standard Replacement, Economy and High Performance / Heavy Duty.
36 parts on this 2022 Acura MDX page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including ELRING 590797 (Crankshaft Seal) and MAHLE / CLEVITE 55339 (Cylinder Head Gasket). Click any part number to see every vehicle that part fits.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 15012900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | CLOCKWISE | View on Amazon |
| AJUSA Fits: 3.5L V6 | 15064200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 39 x 53 x 8Clockwise | View on Amazon |
| ELRING Fits: 3.5L V6 | 489890 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Camshaft Seal parts are listed for the 2022 Acura MDX, from AJUSA and ELRING.
This group includes AJUSA 15012900, AJUSA 15064200 and ELRING 489890.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.5L V6 | BB3516 | 🇺🇸 US | Set | View on Amazon |
| TOPLINE Fits: 3.5L V6 | RBH52 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
2 Connecting Rod Bearing parts for the 2022 Acura MDX come from 2 brands — ENGINETECH and TOPLINE.
Part numbers include ENGINETECH BB3516 and TOPLINE RBH52.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 54337700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 3.5L V6 | 54253700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ENGINETECH Fits: 3.5L V6 | HO35CSB | 🇺🇸 US | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.5L V6 | CS54578A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| TOPLINE Fits: 3.5L V6 | CBSH52 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
5 Conversion / Lower Gasket Set parts for the 2022 Acura MDX come from 4 brands — AJUSA, ENGINETECH, MAHLE / CLEVITE and 1 other brand.
Listed part numbers: AJUSA 54337700, AJUSA 54253700 and ENGINETECH HO35CSB, plus the other parts above.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.5L V6 | BC2208 | 🇺🇸 US | Set | View on Amazon |
| TOPLINE Fits: 3.5L V6 | TWH37 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Thrust Bearing | View on Amazon |
| TOPLINE Fits: 3.5L V6 | MBH52 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
3 Crankshaft Main Bearing parts are listed for the 2022 Acura MDX, from TOPLINE and ENGINETECH.
This group includes ENGINETECH BC2208, TOPLINE TWH37 and TOPLINE MBH52.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Popular Fits: 3.5L V6 | 590797 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Height [MM]: 10Inner Diameter [mm]: 80 | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.5L V6 | 67782 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontMolded Rubber | View on Amazon |
| AJUSA Fits: all 2022 MDX engines | 15089500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontClockwise | View on Amazon |
| AJUSA Fits: all 2022 MDX engines | 15089600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearCounter Clockwise | View on Amazon |
| ELRING Fits: 3.5L V6 | 490050 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Height [MM]: 7Swirl Type: Right-hand Twist | View on Amazon |
| ELRING Fits: 3.5L V6 | 464580 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Height [MM]: 8Swirl Type: Right-hand Twist | View on Amazon |
| ELRING Fits: 3.5L V6 | 478920 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Height [MM]: 8Swirl Type: Left-hand Twist | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
7 Crankshaft Seal parts are listed for the 2022 Acura MDX, from ELRING, AJUSA and MAHLE / CLEVITE. ELRING 590797 carries the "Popular" badge. 2 parts fit every engine; the other 5 are engine-specific.
Part numbers include ELRING 590797, MAHLE / CLEVITE 67782 and AJUSA 15089500, among others listed above.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: all 2022 MDX engines | 81067500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.5L V6 | GS33606 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set for 1 Cylinder Head Cylinder Head BoltSteel | View on Amazon |
| TOPLINE Fits: 3.5L V6 | HBH52 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
3 Cylinder Head Bolt parts for the 2022 Acura MDX come from 3 brands — AJUSA, MAHLE / CLEVITE and TOPLINE. 1 part fits every engine; the other 2 are engine-specific.
This group includes AJUSA 81067500, MAHLE / CLEVITE GS33606 and TOPLINE HBH52.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Popular Fits: 3.5L V6 | 55339 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.5L V6 | 55340 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 10275100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 10275200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 52652700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 52652800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| ELRING Fits: 3.5L V6 | 948680 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| ELRING Fits: 3.5L V6 | 948720 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| FEL-PRO Fits: 3.5L V6 | 26858PT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| ULTRA-POWER Fits: 3.5L V6 | 55339 | 🇺🇸 US 🇨🇦 CA | LeftMulti Layered Steel | View on Amazon |
| ULTRA-POWER Fits: 3.5L V6 | 55340 | 🇺🇸 US 🇨🇦 CA | RightMulti Layered Steel | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
11 Cylinder Head Gasket parts for the 2022 Acura MDX come from 5 brands — AJUSA, MAHLE / CLEVITE, ELRING and 2 other brands. The "Popular" part is MAHLE / CLEVITE 55339.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 52652600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Complete Set | View on Amazon |
| AJUSA Fits: 3.5L V6 | 52632000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Complete Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 | HS55339 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Valve Stem Seals | View on Amazon |
| TOPLINE Fits: 3.5L V6 | HSH52A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Valve Stem Seals | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
4 Cylinder Head Gasket Set parts for the 2022 Acura MDX come from 3 brands — AJUSA, MAHLE / CLEVITE and TOPLINE.
This group includes AJUSA 52652600, AJUSA 52632000 and MAHLE / CLEVITE HS55339 and the remaining parts above.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO Fits: all 2022 MDX engines | AC1228121 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Lower | View on Amazon |
This table covers the Engine covers.
This group shows a single part: TECHPRO AC1228121.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 50581500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 3.5L V6 | 50561900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| TOPLINE Fits: 3.5L V6 | CGSH52A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Engine Kit Gasket Set parts for the 2022 Acura MDX come from 2 brands — AJUSA and TOPLINE.
Listed part numbers: AJUSA 50581500, AJUSA 50561900 and TOPLINE CGSH52A.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.5L V6 | EM4407 | 🇺🇸 US | .2146 stem1.181 Head | View on Amazon |
| MELLING Popular Fits: 3.5L V6 | V0779 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | High Alloy Steel | View on Amazon |
| MELLING Fits: 3.5L V6 | V0779IN | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | High Temperature nickel Base Inconel | View on Amazon |
| QUALCAST Fits: 3.5L V6 | 1010779 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.181 Head Diameter. | View on Amazon |
| SBI Fits: 3.5L V6 | 10779 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE Fits: 3.5L V6 | EVAC9 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
6 Exhaust Valve parts are listed for the 2022 Acura MDX, from MELLING, ENGINETECH, QUALCAST and 2 other brands. ENGINETECH EM4407 carries the "Popular" badge.
This group includes ENGINETECH EM4407, MELLING V0779 and MELLING V0779IN and the remaining parts above.
Fuel Pump Camshaft Follower
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 3.5L V6 | GDF503 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the followers that drive a mechanical fuel pump off the camshaft.
This group shows a single part: STANDARD MOTOR PRODUCTS GDF503.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Popular Fits: 3.5L V6 | MS20320 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Layered Steel | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 13346400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| BECK/ARNLEY Fits: 3.5L V6 | 0376245 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| ELRING Fits: 3.5L V6 | 948770 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| ELRING Fits: 3.5L V6 | 948760 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 | MS20316 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered SteelSet | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
6 Intake Manifold Gasket parts for the 2022 Acura MDX come from 4 brands — MAHLE / CLEVITE, ELRING, AJUSA and 1 other brand. The "Popular" part is MAHLE / CLEVITE MS20320.
This group includes MAHLE / CLEVITE MS20320, AJUSA 13346400 and BECK/ARNLEY 0376245 and the remaining parts above.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.5L V6 | V0336 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Stainless Steel | View on Amazon |
| ENGINETECH Fits: 3.5L V6 | IM4476 | 🇺🇸 US | .2165 stem1.417 Head | View on Amazon |
| QUALCAST Fits: 3.5L V6 | 1013336 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.417 Head Diameter. | View on Amazon |
| SBI Fits: 3.5L V6 | 13336 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE Fits: 3.5L V6 | IVAC9M | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
5 Intake Valve parts are listed for the 2022 Acura MDX, from MELLING, ENGINETECH, QUALCAST and 2 other brands. MELLING V0336 carries the "Popular" badge.
This group includes MELLING V0336, ENGINETECH IM4476 and QUALCAST 1013336 and the remaining parts above.
Motor Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: 3.5L V6 | 9965 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Frontwith Wire / Sensor | View on Amazon |
| WESTAR Popular Fits: 3.5L V6 | EM7301 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| ANCHOR Fits: 3.5L V6 | 10360 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightHydraulic | View on Amazon |
| ANCHOR Fits: 3.5L V6 | 10355 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith Wire / Sensor | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: all 2022 MDX engines | A65179 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.0L V6 Turbocharged | A65165 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.5L V6 | A65175 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| PIONEER Fits: 3.5L V6 | 619965 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
8 Motor Mount parts are listed for the 2022 Acura MDX, from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 1 other brand. ANCHOR 9965 carries the "Popular" badge. 1 part fits every engine; the other 7 are engine-specific.
Part numbers include ANCHOR 9965, WESTAR EM7301 and ANCHOR 10360, among others listed above.
Oil
Summary: Notes list SAE 0W-20. Confirm the engine and the weight on the filler cap before you buy. Both engines share the same viscosity. Replacement brands in this table include LIQUI MOLY, VALVOLINE and MOBIL.
Full Synthetic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY Popular Fits: all 2022 MDX engines | 2208 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec AA 0W-205 Liter | View on Amazon |
| LIQUI MOLY Popular Fits: all 2022 MDX engines | 20438 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 0W-205 Liter | View on Amazon |
| LIQUI MOLY Popular Fits: all 2022 MDX engines | 22046 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-205 Liter | View on Amazon |
| MOBIL Popular Fits: all 2022 MDX engines | 124184 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0W-20Mobil 1 Advanced Fuel Economy | View on Amazon |
| MOBIL Popular Fits: all 2022 MDX engines | 125197 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic 0W-20Mobil Full Synthetic | View on Amazon |
| VALVOLINE Popular Fits: all 2022 MDX engines | VV916 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 0W-201 Quart | View on Amazon |
| IDEMITSU Fits: all 2022 MDX engines | 30016051750 | 🇺🇸 US | IFG3 0W-20 SQ/GF-7A1 Quart | View on Amazon |
| IDEMITSU Fits: all 2022 MDX engines | 30016051953 | 🇺🇸 US | IFG3 0W-20 SQ/GF-7A5 Quart | View on Amazon |
| IDEMITSU Fits: all 2022 MDX engines | 30015203750 | 🇺🇸 US | IFG3 0W-20 SP/Motor Oil1 Quart | View on Amazon |
| LIQUI MOLY Fits: all 2022 MDX engines | 2207 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special TEC AA 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2022 MDX engines | 20436 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2022 MDX engines | 22044 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2022 MDX engines | 20198 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec V 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2022 MDX engines | 20408 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec LR 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2022 MDX engines | 20200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec V 0W-205 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2022 MDX engines | 22190 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6610 0W-205 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2022 MDX engines | 20410 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec LR 0W-205 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2022 MDX engines | 22048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-2020 Liter | View on Amazon |
| LUCAS OIL Fits: all 2022 MDX engines | 10564 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FULL SYNTHETIC MOTOR OIL SAE 0W-201 qt | View on Amazon |
| LUCAS OIL Fits: all 2022 MDX engines | 18003 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic Motor Oil SAE 0W-206 Gallon | View on Amazon |
| MOBIL Fits: all 2022 MDX engines | 120926 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance 0W-20Mobil 1 Extended Performance | View on Amazon |
| MOBIL Fits: all 2022 MDX engines | 124592 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Truck & SUV 0W-20Mobil 1 Truck & SUV | View on Amazon |
| PENTOSIN Fits: all 2022 MDX engines | 8044210 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0W-20-Pentospeed-DEXOS1 GEN31 Liter | View on Amazon |
| PENTOSIN Fits: all 2022 MDX engines | 8044317 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pento Speed FESAE 0W-20 | View on Amazon |
| PENTOSIN Fits: all 2022 MDX engines | 8044319 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pento Speed FESAE 0W-20 | View on Amazon |
| PENTOSIN Fits: all 2022 MDX engines | 8044212 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0W-20-Pentospeed-DEXOS1 GEN35 Liters | View on Amazon |
| VALVOLINE Fits: all 2022 MDX engines | 891682 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Protection Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: all 2022 MDX engines | 904536 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Restore & Protect Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: all 2022 MDX engines | 904538 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Restore & Protect Full Synthetic SAE 0W-205 Quart | View on Amazon |
| VALVOLINE Fits: all 2022 MDX engines | 881150 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 0W-20Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: all 2022 MDX engines | 898664 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hybrid Vehicle Full Synthetic SAE 0W-205 Quart | View on Amazon |
High Mileage (>75,000 Miles)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Fits: all 2022 MDX engines | 125203 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage 0W-20Mobil Full Synthetic | View on Amazon |
| MOBIL Fits: all 2022 MDX engines | 122535 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | High Mileage 0W-20Mobil 1 High Mileage | View on Amazon |
| MOBIL Fits: all 2022 MDX engines | 123836 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance High Mileage 0W-20Extended Performance High Mileage Synthetic Motor Oil 0W-20, 1 Quart | View on Amazon |
| VALVOLINE Fits: all 2022 MDX engines | 833002 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Max Life High Mileage SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: all 2022 MDX engines | 852400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage with Max Life Technology SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: all 2022 MDX engines | 881149 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Max Life High Mileage SAE 0W-20Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: all 2022 MDX engines | 881168 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage with Max Life Technology SAE 0W-20Easy Pour 5 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
38 Oil parts are listed for the 2022 Acura MDX, from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. LIQUI MOLY 2208 carries the "Popular" badge. Grades run from Full Synthetic through High Mileage (>75,000 Miles); Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.
Oil Cooler Mounting Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HAYDEN Fits: 3.5L V6 | 238 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber Block Mounting Kit for Heavy Duty Oil Cooler | View on Amazon |
| HAYDEN Fits: 3.5L V6 | 153 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Metal Mounting Bracket Kit for Heavy Duty Oil Cooler | View on Amazon |
This table covers the Oil Cooler Mounting kits.
2 Oil Cooler Mounting Kit parts for the 2022 Acura MDX come from HAYDEN.
This group includes HAYDEN 238 and HAYDEN 153.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: all 2022 MDX engines | 090033 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | StandardM14-1.50 | View on Amazon |
| DORMAN Popular Fits: all 2022 MDX engines | 090053 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | MetalPilot Point | View on Amazon |
| ELRING Fits: 3.5L V6 | 523500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Seal RingBolt Head-/Nut Design: Male Hex | View on Amazon |
| ELRING Fits: 3.5L V6 | 523480 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | without Seal RingThread Size: M14X1,5x15 | View on Amazon |
| REIN Fits: all 2022 MDX engines | HWU0110 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| SKP Fits: all 2022 MDX engines | SK090053CD | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Metal | View on Amazon |
This table covers the drain plugs in the oil pan.
6 Oil Drain Plug parts are listed for the 2022 Acura MDX, from DORMAN, ELRING, REIN and 1 other brand. DORMAN 090033 carries the "Popular" badge. 4 parts fit every engine; the other 2 are engine-specific.
Listed part numbers: DORMAN 090033, DORMAN 090053 and ELRING 523500, plus the other parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: all 2022 MDX engines | 095144 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Aluminum | View on Amazon |
| AJUSA Fits: all 2022 MDX engines | 22007400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 3.5L V6 | 243600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: Aluminium | View on Amazon |
| FEL-PRO Fits: all 2022 MDX engines | 73346 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0.570 (in) Inside Diameter x 0.860 (in) Outside DiameterFlat Washer | View on Amazon |
| ULTRA-POWER Fits: all 2022 MDX engines | 095144 | 🇺🇸 US 🇨🇦 CA | Aluminum Gasket | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Oil Drain Plug Gasket parts for the 2022 Acura MDX come from 5 brands — DORMAN, AJUSA, ELRING and 2 other brands. The "Popular" part is DORMAN 095144. 4 parts fit every engine; the other 1 is engine-specific.
This group includes DORMAN 095144, AJUSA 22007400 and ELRING 243600 and the remaining parts above.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CALORSTAT Fits: all 2022 MDX engines | OC2335 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Round with Handlewith OE No. 15610REZA00 | View on Amazon |
| GATES Fits: all 2022 MDX engines | 31284 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOTORAD Fits: all 2022 MDX engines | MO159 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the caps on the oil filler neck.
3 Oil Filler Cap parts are listed for the 2022 Acura MDX, from CALORSTAT, GATES and MOTORAD. All of them fit every engine offered in the 2022 MDX.
Part numbers include CALORSTAT OC2335, GATES 31284 and MOTORAD MO159.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Fits: all 2022 MDX engines | 72226WS | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Workshop Oil Filter | View on Amazon |
| FRAM Fits: all 2022 MDX engines | FE7317 | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| FVP Fits: all 2022 MDX engines | R7356 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE# 15400-PLM-A02 | View on Amazon |
| PRO-TEC Fits: all 2022 MDX engines | PXL57356 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: all 2022 MDX engines | PG4612 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: all 2022 MDX engines | PO4610HN1 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Style | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WIX Popular Fits: all 2022 MDX engines | 57356XP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
| MOBIL Fits: all 2022 MDX engines | M1110A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Popular Fits: all 2022 MDX engines | 3323 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Premium Oil Filter | View on Amazon |
| DENSO Popular Fits: all 2022 MDX engines | 1502006 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Oil Filter or FTF Engine Oil Filter | View on Amazon |
| WIX Popular Fits: all 2022 MDX engines | 57356 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| BECK/ARNLEY Fits: all 2022 MDX engines | 0410812 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HASTINGS / BALDWIN Fits: all 2022 MDX engines | LF240 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HENGST Fits: all 2022 MDX engines | H97W05 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Filter Type: Spin-On | View on Amazon |
| MAHLE / CLEVITE Fits: all 2022 MDX engines | OC707 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spin-On86.00mm Height | View on Amazon |
| MANN Fits: all 2022 MDX engines | W6103 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Anti-Drain Back Valve: NoHeight: 3.54 In | View on Amazon |
| MOTORCRAFT Fits: all 2022 MDX engines | FL816 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthetic Oil Application | View on Amazon |
| VARIOUS MFR Fits: all 2022 MDX engines | PG4612EX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
18 Oil Filter parts are listed for the 2022 Acura MDX, from VARIOUS MFR, BOSCH, WIX and 11 other brands. WIX 57356XP carries the "Popular" badge. All of them fit every engine offered in the 2022 MDX.
In the Economy grade, VARIOUS MFR, BOSCH, FRAM and 2 other brands supply 6 parts: the catalog's value-priced group. A representative part number is BOSCH 72226WS.
In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 57356XP.
The Standard Replacement section lists 10 options from BOSCH, DENSO, WIX and 7 other brands — built to original-equipment specification. BOSCH 3323 is listed in this group.
Oil Filter Adapter Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.5L V6 | ES74047 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.5L V6 | B33360 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Oil Filter Adapter GasketMolded Rubber | View on Amazon |
This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
2 Oil Filter Adapter Gasket / O-Ring parts for the 2022 Acura MDX come from 2 brands — FEL-PRO and MAHLE / CLEVITE.
Listed part numbers: FEL-PRO ES74047 and MAHLE / CLEVITE B33360.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ Fits: all 2022 MDX engines | 703141410 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RTV Silicone | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2022 Acura MDX — VICTOR REINZ 703141410.
Oil Pump
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.5L V6 | EPK200 | 🇺🇸 US | 'Pressure King' Value Line Pump | View on Amazon |
| SKP Fits: 3.5L V6 | SKM569 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard Volume and Pressure | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 3.5L V6 | M569 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOPLINE Fits: 3.5L V6 | OPH52 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit | View on Amazon |
This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.
4 Oil Pump parts are listed for the 2022 Acura MDX, from ENGINETECH, SKP, MELLING and 1 other brand.
Economy: 2 parts, from ENGINETECH and SKP. A representative part number is ENGINETECH EPK200.
The Standard Replacement section: 1 option from MELLING. MELLING M569 is listed in this group.
1 ungrouped part is not assigned to a grade, with the same engine-level match.
Part numbers include ENGINETECH EPK200, SKP SKM569 and MELLING M569, among others listed above.
Oil Pump Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.5L V6 | 01130500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 3.5L V6 | 967650 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Side | View on Amazon |
This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pump Gasket parts for the 2022 Acura MDX come from 2 brands — AJUSA and ELRING.
Listed part numbers: AJUSA 01130500 and ELRING 967650.
Piston
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.5L V6 | P3552 | 🇺🇸 US | Coated SkirtDome Top | View on Amazon |
| ENGINETECH Fits: 3.5L V6 | K35526P | 🇺🇸 US | Coated SkirtDome Top | View on Amazon |
This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.
2 Piston parts for the 2022 Acura MDX come from ENGINETECH.
This group includes ENGINETECH P3552 and ENGINETECH K35526P.
Piston Ring
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.5L V6 | C35046 | 🇺🇸 US | PremiumSet | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOPLINE Fits: 3.5L V6 | RSH52A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
2 Piston Ring parts for the 2022 Acura MDX come from 2 brands — ENGINETECH and TOPLINE.
In the Premium grade, ENGINETECH supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is ENGINETECH C35046.
Standard Replacement: 1 part, from TOPLINE. A representative part number is TOPLINE RSH52A.
This group includes ENGINETECH C35046 and TOPLINE RSH52A.
Timing Belt
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.5L V6 | B329 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BANDO Popular Fits: 3.5L V6 | TB329 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GATES Popular Fits: 3.5L V6 | T329 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Power Grip | View on Amazon |
| ACDELCO Fits: 3.5L V6 | TB329 | 🇺🇸 US 🇨🇦 CA | Professional / Gold | View on Amazon |
| CONTINENTAL Fits: 3.5L V6 | 40329 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Import | View on Amazon |
| DAYCO Fits: 3.5L V6 | 95329 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off.
6 Timing Belt parts for the 2022 Acura MDX come from 6 brands — CLOYES, BANDO, GATES and 3 other brands. The "Popular" part is BANDO TB329.
The Economy section: 1 option from CLOYES. CLOYES B329 is listed in this group.
Standard Replacement: 5 parts, from BANDO, GATES, ACDELCO and 2 other brands. A representative part number is BANDO TB329.
This group includes BANDO TB329, CLOYES B329 and GATES T329 and the remaining parts above.
Timing Belt & Component Kit
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.5L V6 | BK329A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| CONTINENTAL Fits: 3.5L V6 | GTKWP329 | 🇺🇸 US | Black SeriesIncludes Aluminum Hydraulic Tensioner | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AISIN Popular Fits: 3.5L V6 | TKH002 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit Contains Japan or US Manufactured Water Pump | View on Amazon |
| CONTINENTAL Popular Fits: 3.5L V6 | PP329LK2 | 🇺🇸 US | Pro Series PLUSIncludes hydraulic tensioner and seals | View on Amazon |
| AISIN Fits: 3.5L V6 | TKH002KR | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit Contains Korean Manufactured Water Pump | View on Amazon |
| CONTINENTAL Fits: 3.5L V6 | TB329K1 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit | View on Amazon |
| CONTINENTAL Fits: 3.5L V6 | TB329LK2 | 🇺🇸 US | Pro SeriesDoes Not include seals | View on Amazon |
| GATES Fits: 3.5L V6 | TCK329A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Power Grip | View on Amazon |
| GATES Fits: 3.5L V6 | TCKWP329A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Power Gripwith Water Pump | View on Amazon |
| GMB Fits: 3.5L V6 | 34352329 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Water Pump | View on Amazon |
| INA Fits: 3.5L V6 | ZBBK329 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AISIN Fits: 3.0L V6 Turbocharged | TKH002KR | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit Contains Korean Manufactured Water Pump | View on Amazon |
| AISIN Fits: 3.0L V6 Turbocharged | TKH002 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit Contains Japan or US Manufactured Water Pump | View on Amazon |
This table covers the Timing Belt & component kits.
13 Timing Belt & Component Kit parts are listed for the 2022 Acura MDX, from CONTINENTAL, AISIN, GATES and 3 other brands. AISIN TKH002 carries the "Popular" badge.
Economy: 2 parts, from CLOYES and CONTINENTAL. A representative part number is CLOYES BK329A.
The Standard Replacement section: 9 options from CONTINENTAL, AISIN, GATES and 2 other brands. AISIN TKH002 is listed in this group.
2 ungrouped parts are not assigned to a grade, with the same engine-level match.
Timing Belt Pulley
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.5L V6 | 95508 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Timing Belt pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt.
One part is listed for the 2022 Acura MDX — CLOYES 95508.
Timing Belt Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AISIN Popular Fits: 3.5L V6 | BTH001 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hydraulic Assembly | View on Amazon |
| GMB Popular Fits: 3.5L V6 | 4355767 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hydraulic Assembly | View on Amazon |
| ACDELCO Fits: 3.5L V6 | T43129 | 🇺🇸 US 🇨🇦 CA | Professional / GoldHydraulic Assembly | View on Amazon |
| CLOYES Fits: 3.5L V6 | 96187 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| DAYCO Fits: 3.5L V6 | 85067 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hydraulic Assembly | View on Amazon |
| GATES Fits: 3.5L V6 | T43129 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hydraulic AssemblyNo Pulley Attached | View on Amazon |
| GATES Fits: 3.5L V6 | T41330 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GMB Fits: 3.5L V6 | 4359390 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ULTRA-POWER Fits: 3.5L V6 | T41330 | 🇺🇸 US 🇨🇦 CA | Interference EngineTiming Belt | View on Amazon |
This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
9 Timing Belt Tensioner parts are listed for the 2022 Acura MDX, from GMB, GATES, AISIN and 4 other brands. AISIN BTH001 carries the "Popular" badge.
Part numbers include AISIN BTH001, GMB 4355767 and ACDELCO T43129, among others listed above.
Timing Cover Dust Seal Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 3.5L V6 | JV5273 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Timing Cover Dust Seal KitMolded Rubber | View on Amazon |
This table covers the Timing Cover Dust Seal sets.
One part is listed for the 2022 Acura MDX — MAHLE / CLEVITE JV5273.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: all 2022 MDX engines | 16473 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2022 Acura MDX — SKF 16473.
Timing Idler
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GMB Popular Fits: 3.5L V6 | 4359730 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| CLOYES Fits: 3.5L V6 | 95509 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GATES Fits: 3.5L V6 | T41232 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Timing Belt PulleySteel Smooth/Backside (55mm x 19mm x 24mm) | View on Amazon |
| TOPLINE Fits: 3.5L V6 | BTH38I | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Idler | View on Amazon |
| ULTRA-POWER Fits: 3.5L V6 | T41232 | 🇺🇸 US 🇨🇦 CA | Timing Idler or PulleyIdler | View on Amazon |
This table covers the Timing idlers. Typical signs include a chirp that follows engine speed, or an idler that feels rough or has play. Replace a noisy idler with the belt — the labor is already paid for.
5 Timing Idler parts are listed for the 2022 Acura MDX, from GMB, CLOYES, GATES and 2 other brands. GMB 4359730 carries the "Popular" badge.
Listed part numbers: GMB 4359730, CLOYES 95509 and GATES T41232, plus the other parts above.
Turbocharger Boost Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 3.0L V6 Turbocharged | 5S15125 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HELLA Fits: 3.0L V6 Turbocharged | 009403361 | 🇺🇸 US 🇨🇦 CA | 3-Pin ConnectorBolted | View on Amazon |
This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
2 Turbocharger Boost Sensor parts for the 2022 Acura MDX come from 2 brands — WELLS and HELLA.
The Economy section: 1 option from WELLS. WELLS 5S15125 is listed in this group.
Standard Replacement: 1 part, from HELLA. A representative part number is HELLA 009403361.
Part numbers include WELLS 5S15125 and HELLA 009403361.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | JTC12788 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Mounting Gasket Set | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: AJUSA JTC12788.
Turbocharger Oil Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | OP11412 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Supply tube | View on Amazon |
This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
One part is listed for the 2022 Acura MDX — AJUSA OP11412.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTOTECNICA Fits: all 2022 MDX engines | HA1423912 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| AUTOTECNICA Fits: all 2022 MDX engines | HA1423913 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the Valve covers.
2 Valve Cover parts for the 2022 Acura MDX come from AUTOTECNICA. Every part fits both the 3.0L V6 Turbocharged and the 3.5L V6.
Part numbers include AUTOTECNICA HA1423912 and AUTOTECNICA HA1423913.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY Popular Fits: 3.5L V6 | 0362072 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes spark plug tube seals and grommets | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.5L V6 | VS50881SR | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molded Rubber | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 75000400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| BECK/ARNLEY Fits: 3.5L V6 | 0362054 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes spark plug tube seals and grommets | View on Amazon |
| BECK/ARNLEY Fits: 3.5L V6 | 0362055 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes spark plug tube seals and grommets | View on Amazon |
| ELRING Fits: 3.5L V6 | 585660 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 | VS50881SL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molded Rubber | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
7 Valve Cover Gasket parts are listed for the 2022 Acura MDX, from BECK/ARNLEY, MAHLE / CLEVITE, AJUSA and 1 other brand. BECK/ARNLEY 0362072 carries the "Popular" badge.
This group includes BECK/ARNLEY 0362072, MAHLE / CLEVITE VS50881SR and AJUSA 75000400 and the remaining parts above.
Valve Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SBI Popular Fits: 3.5L V6 | 1408157 | 🇺🇸 US 🇨🇦 CA | Exhaust0.2173 I.D. | View on Amazon |
| QUALCAST Fits: 3.5L V6 | 308157 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust2.130 Overall Length. 0.436 Outside Diameter | View on Amazon |
| SBI Fits: 3.5L V6 | 1408158 | 🇺🇸 US 🇨🇦 CA | Intake0.2173 I.D. | View on Amazon |
| TOPLINE Fits: 3.5L V6 | EVGH21 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| TOPLINE Fits: 3.5L V6 | IVGH21 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.
5 Valve Guide parts are listed for the 2022 Acura MDX, from SBI, TOPLINE and QUALCAST. SBI 1408157 carries the "Popular" badge.
Part numbers include SBI 1408157, QUALCAST 308157 and SBI 1408158, among others listed above.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 85025600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
One part is listed for the 2022 Acura MDX — AJUSA 85025600.
Valve Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 3.5L V6 | VS2501 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| MELLING Fits: 3.5L V6 | VS2502 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
2 Valve Spring parts for the 2022 Acura MDX come from MELLING.
Listed part numbers: MELLING VS2501 and MELLING VS2502.
Valve Spring Retainer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 3.5L V6 | VSR730 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Valve Spring retainers.
This group shows a single part: MELLING VSR730.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: all 2022 MDX engines | VL1060 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Valve Stem Diameter: 0.215 in | View on Amazon |
| QUALCAST Fits: 3.5L V6 | 345008 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1 Round Groove. 0.215 Stem DIA. | View on Amazon |
| SBI Fits: 3.5L V6 | 1211060 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2190 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
3 Valve Spring Retainer Keeper parts for the 2022 Acura MDX come from 3 brands — MELLING, QUALCAST and SBI. 1 part fits every engine; the other 2 are engine-specific.
Part numbers include MELLING VL1060, QUALCAST 345008 and SBI 1211060.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: all 2022 MDX engines | SS702832 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.5L V6 | SS45626 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMetal with Molded Rubber | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 12014300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust5 x 10.9 x 10 | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 57059800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 3.5L V6 | 130860 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Colour: BlackMaterial: FPM (fluoride rubber) | View on Amazon |
| ELRING Fits: 3.5L V6 | 427370 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| ELRING Fits: 3.5L V6 | 130560 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Colour: GreenHeight [MM]: 10 | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 | SS45627 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMetal with Molded Rubber | View on Amazon |
| QUALCAST Fits: 3.5L V6 | 3859255 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Viton Metal Clad | View on Amazon |
| SBI Fits: 3.5L V6 | 1221202 | 🇺🇸 US 🇨🇦 CA | ExhaustViton Material | View on Amazon |
| SBI Fits: 3.5L V6 | 1221201 | 🇺🇸 US 🇨🇦 CA | IntakeViton Material | View on Amazon |
| TOPLINE Fits: 3.5L V6 | VSSH21 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
12 Valve Stem Seal parts are listed for the 2022 Acura MDX, from ELRING, MAHLE / CLEVITE, AJUSA and 4 other brands. FEL-PRO SS702832 carries the "Popular" badge. 1 part fits every engine; the other 11 are engine-specific.
Variable Valve Timing (VVT) Solenoid / Actuator
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ROSTRA Fits: 3.5L V6 | 790143 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS Fits: 3.5L V6 | 5901137 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
| WELLS Fits: 3.0L V6 Turbocharged | 2T1143 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
| WELLS Fits: 3.5L V6 | 2T1262 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| WELLS Fits: 3.5L V6 | 2T1144 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: all 2022 MDX engines | VVT238 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
6 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2022 Acura MDX, from WELLS, ROSTRA, WALKER PRODUCTS and 1 other brand. STANDARD MOTOR PRODUCTS VVT238 carries the "Popular" badge. 1 part fits every engine; the other 5 are engine-specific.
Economy: 5 parts, from WELLS, ROSTRA and WALKER PRODUCTS. A representative part number is ROSTRA 790143.
The Standard Replacement section: 1 option from STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS VVT238 is listed in this group.
Part numbers include STANDARD MOTOR PRODUCTS VVT238, ROSTRA 790143 and WALKER PRODUCTS 5901137, among others listed above.
Variable Valve Timing (VVT) Solenoid Gasket / Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.5L V6 | 464360 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Strainer | View on Amazon |
This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: ELRING 464360.
Buying Engine Parts for a 2022 Acura MDX
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 2022 Acura MDX?
Our catalog currently lists 233 engine parts for the 2022 Acura MDX across 47 subcategories and 56 brands, covering both the 3.0L V6 Turbocharged and the 3.5L V6. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2022 Acura MDX engines?
Some do. 79 parts fit every engine; the other 154 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2022 Acura MDX?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2022 Acura MDX?
Oil rows on this page include SAE 0W-20. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2022 Acura MDX was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2022 Acura MDX?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2022 Acura MDX
Engine Parts for Other Acura MDX Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.