13 Engine parts are listed for the 2007 Alfa Romeo Brera, in 8 part types, covering the 3.2L V6 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2007 Alfa Romeo Brera, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 8 parts of the 13 listed are Cylinder Head Gasket (4 parts), Crankshaft Seal (2 parts) and Cylinder Head Bolt (2 parts). The other 5 part types cover the remaining 5 parts.
Every part on this page is matched to the 3.2L V6 — the only engine offered in the 2007 Alfa Romeo Brera.
The most listed brands for 2007 Alfa Romeo Brera engine parts are AJUSA (11 parts), KING ENGINE BEARINGS (1 part) and VICTOR REINZ (1 part).
Each part number listed for the 2007 Alfa Romeo Brera opens a page with every vehicle that part fits.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 54152100 | 🇲🇽 MX | Engine 939A.000 | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
This group shows a single part: AJUSA 54152100.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS | MB511XP | 🇲🇽 MX | SetTrimetal | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
One part is listed for the 2007 Alfa Romeo Brera — KING ENGINE BEARINGS MB511XP.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 15091400 | 🇲🇽 MX | FrontClockwise | View on Amazon |
| AJUSA | 71005500 | 🇲🇽 MX | RearEngine 939A.000 | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
AJUSA supplies both parts for the 2007 Alfa Romeo Brera.
This group includes AJUSA 15091400 and AJUSA 71005500.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 81051900 | 🇲🇽 MX | Engine 939A.000 | View on Amazon |
| VICTOR REINZ | 143229301 | 🇲🇽 MX | Set | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
2 Cylinder Head Bolt parts for the 2007 Alfa Romeo Brera come from 2 brands — AJUSA and VICTOR REINZ.
Listed part numbers: AJUSA 81051900 and VICTOR REINZ 143229301.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 10179800 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA | 10175400 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA | 52322000 | 🇲🇽 MX | RightEngine 939A.000 | View on Amazon |
| AJUSA | 52322100 | 🇲🇽 MX | LeftEngine 939A.000 | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Cylinder Head Gasket parts for the 2007 Alfa Romeo Brera come from AJUSA.
Part numbers include AJUSA 10179800, AJUSA 10175400 and AJUSA 52322000, among others listed above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 52255400 | 🇲🇽 MX | Complete Set | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
This group shows a single part: AJUSA 52255400.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 50274000 | 🇲🇽 MX | Engine 939A.000 | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
This group shows a single part: AJUSA 50274000.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 13214200 | 🇲🇽 MX | Engine 939A.000 | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: AJUSA 13214200.
Buying Engine Parts for a 2007 Alfa Romeo Brera
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 3.2L V6 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Cylinder Head Gasket and Crankshaft Seal .
Frequently Asked Questions
How many engine parts fit the 2007 Alfa Romeo Brera?
Our catalog currently lists 13 engine parts for the 2007 Alfa Romeo Brera across 8 subcategories and 3 brands, covering the 3.2L V6 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 2007 Alfa Romeo Brera?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2007 Alfa Romeo Brera was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2007 Alfa Romeo Brera?
Every part on this page is matched to the 3.2L V6 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2007 Alfa Romeo Brera
Engine Parts for Other Alfa Romeo Brera Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.