2008 Alfa Romeo GT Engine Parts

Engine:
2.0L L4

This page lists 46 engine parts for the 2008 Alfa Romeo GT, across 18 part types, covering the 2.0L L4 engine. Every part shows its brand, manufacturer part number and fitment notes.

On the 2008 Alfa Romeo GT, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 16 parts of the 46 listed are Oil Filter (7 parts), Crankshaft Seal (5 parts) and Cylinder Head Gasket Set (4 parts). The other 15 part types cover the remaining 30 parts.

Camshaft

Brand Part Number Markets Notes Buy
AJUSA 93123100
🇲🇽 MX
Intake
View on
Amazon
AJUSA 93132000
🇲🇽 MX
Exhaust
View on
Amazon

This table covers the camshafts that open the valves.

Camshaft Seal

Brand Part Number Markets Notes Buy
AJUSA 15008200
🇲🇽 MX
30 x 42 x 7Clockwise
View on
Amazon
AJUSA 15055300
🇲🇽 MX
55 x 68 x 8Clockwise
View on
Amazon
ELRING 505838
🇲🇽 MX
Dust Cover: with dust LipHeight [MM]: 7
Fitment notes — ELRING 505838
Dust Cover: with dust LipHeight [MM]: 7Inner Diameter [MM]: 30Material: FPM (fluoride rubber)Radial Shaft Seal Design: ASWSwirl Type: Right-hand Twist
Body code: 125.436.1
View on
Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 54127500
🇲🇽 MX
View on
Amazon
ELRING 387580
🇲🇽 MX
View on
Amazon
ELRING 431250
🇲🇽 MX
with Crankshaft Seal
Fitment notes — ELRING 431250
with Crankshaft Seal
Body code: 125.436.1
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
ELRING Popular 069590
🇲🇽 MX
Inner Diameter [mm]: 31Radial Shaft Seal Design: AwithBS
Fitment notes — ELRING 069590
Inner Diameter [mm]: 31Radial Shaft Seal Design: AwithBSSwirl Type: Right-hand Twist
Body code: 125.436.1
View on
Amazon
AJUSA 15055200
🇲🇽 MX
FrontClockwise
View on
Amazon
AJUSA 71000800
🇲🇽 MX
Rear
View on
Amazon
ELRING 477010
🇲🇽 MX
Inner Diameter [mm]: 55Material: FPM (Fluoride Rubber)
Fitment notes — ELRING 477010
Inner Diameter [mm]: 55Material: FPM (Fluoride Rubber)Radial Shaft Seal Design: AwithBSSwirl Type: Right-hand Twist
Body code: 125.436.1
View on
Amazon
ELRING 199191
🇲🇽 MX
with Mounting SleeveMaterial: FPM (Fluoride Rubber)
Fitment notes — ELRING 199191
with Mounting SleeveMaterial: FPM (Fluoride Rubber)
Body code: 125.436.1
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
AJUSA 81018000
🇲🇽 MX
View on
Amazon
ELRING 152080
🇲🇽 MX
Set
Fitment notes — ELRING 152080
Set
Body code: 125.436.1
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
AJUSA 10152600
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10152600
Multi Layered Steel
84 Bore Diameter
View on
Amazon
ELRING 862553
🇲🇽 MX
Diameter [MM]: 83,8Gasket Design: Multilayer Steel (MLS)
Fitment notes — ELRING 862553
Diameter [MM]: 83,8Gasket Design: Multilayer Steel (MLS)
Body code: 125.436.1
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 52211600
🇲🇽 MX
Multi Layered Steel
View on
Amazon
ELRING 491980
🇲🇽 MX
with valve stem sealswithout cylinder head gasket
Fitment notes — ELRING 491980
with valve stem sealswithout cylinder head gasket
Engine Number To: 5192515
View on
Amazon
ELRING 585020
🇲🇽 MX
with valve stem sealswithout cylinder head gasket
Fitment notes — ELRING 585020
with valve stem sealswithout cylinder head gasket
Engine Number From: 5192516
View on
Amazon
ELRING 472180
🇲🇽 MX
with valve stem seals,with cylinder head cover gasket,with camshaft seal
Fitment notes — ELRING 472180
with valve stem seals,with cylinder head cover gasket,with camshaft seal
Body code: 125.436.1
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 50226800
🇲🇽 MX
Multi Layered Steel
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
AJUSA 13186100
🇲🇽 MX
View on
Amazon
ELRING 875490
🇲🇽 MX
Body code: 125.436.1
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug

Brand Part Number Markets Notes Buy
ELRING 587200
🇲🇽 MX
without Seal RingBolt Head/Nut Design: Hexagon Socket
Fitment notes — ELRING 587200
without Seal RingBolt Head/Nut Design: Hexagon SocketThread Size: M18X1,5x22
Body code: 125.436.1
View on
Amazon
ELRING 877920
🇲🇽 MX
with Seal RingBolt Head/Nut Design: Hexagon Socket
Fitment notes — ELRING 877920
with Seal RingBolt Head/Nut Design: Hexagon SocketThread Size: M18X1,5x22
Body code: 125.436.1
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
ELRING 804360
🇲🇽 MX
Inner Diameter [MM]: 18,7Inside Diameter: 18.7 mm
Fitment notes — ELRING 804360
Inner Diameter [MM]: 18,7Inside Diameter: 18.7 mmMaterial: FPM (fluoride rubber)
Body code: 125.436.1
View on
Amazon
ELRING 339580
🇲🇽 MX
Material: CopperShape: A-Shape
Fitment notes — ELRING 339580
Material: CopperShape: A-Shape
Body code: 125.436.1
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
VARIOUS MFR PG7695
🇲🇽 MX
View on
Amazon
VARIOUS MFR PO7695
🇲🇽 MX
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
WIX Popular 57207
🇲🇽 MX
View on
Amazon
ACDELCO PF1237B
🇺🇸 US 🇨🇦 CA
Silver
View on
Amazon
MANN W753
🇲🇽 MX
View on
Amazon
Brand Part Number Markets Notes Buy
PUROLATOR TL14612
🇲🇽 MX
Bypass Relief Valve Setting: 14-18 PSIMedia Material: Cellulose
Fitment notes — PUROLATOR TL14612
Bypass Relief Valve Setting: 14-18 PSIMedia Material: CelluloseOuter Diameter Bottom: 2.69 InStyle: Spin-On Lube FilterThread Size: M20X1.5 In
View on
Amazon
PUROLATOR TL14612BP
🇲🇽 MX
Media Material: CelluloseStyle: Spin-On Lube Filter
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
ELRING 365020
🇲🇽 MX
Body code: 125.436.1
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Seal

Brand Part Number Markets Notes Buy
ELRING 058240
🇲🇽 MX
Body code: 125.436.1
View on
Amazon

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Turbocharger Mounting Hardware

Brand Part Number Markets Notes Buy
ELRING 434420
🇲🇽 MX
with gaskets/sealswith Mounting Manual,with Bolts/Screws
View on
Amazon

This table covers the fasteners that mount the turbocharger.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA 56033100
🇲🇽 MX
View on
Amazon
ELRING 375060
🇲🇽 MX
Body code: 125.436.1
View on
Amazon
ELRING 722400
🇲🇽 MX
Body code: 125.436.1
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Lifter

Brand Part Number Markets Notes Buy
AJUSA 85014200
🇲🇽 MX
View on
Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Stem Seal

Brand Part Number Markets Notes Buy
AJUSA 57013800
🇲🇽 MX
View on
Amazon
ELRING 701289
🇲🇽 MX
Height [MM]: 10Inner Diameter [MM]: 9,8
Fitment notes — ELRING 701289
Height [MM]: 10Inner Diameter [MM]: 9,8Material: FPM (fluoride rubber)Outer Diameter [MM]: 13,2Outside Diameter: 13.2 mm
Body code: 125.436.1
View on
Amazon
ELRING 825042
🇲🇽 MX
SetMaterial: FPM (fluoride rubber)
Fitment notes — ELRING 825042
SetMaterial: FPM (fluoride rubber)Valve Stem Diameter [MM]: 7
Body code: 125.436.1
View on
Amazon
ELRING 332470
🇲🇽 MX
Set
Fitment notes — ELRING 332470
Set
Engine Number To: 5192515
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 2008 Alfa Romeo GT

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 2.0L L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Crankshaft Seal .

Frequently Asked Questions

How many engine parts fit the 2008 Alfa Romeo GT?

Our catalog currently lists 46 engine parts for the 2008 Alfa Romeo GT across 18 subcategories and 7 brands, covering the 2.0L L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 2008 Alfa Romeo GT?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2008 Alfa Romeo GT was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2008 Alfa Romeo GT?

Every part on this page is matched to the 2.0L L4 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2008 Alfa Romeo GT

Engine Parts for Other Alfa Romeo GT Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.