2012 Alfa Romeo Mito Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Camshaft Seal parts for the 2012 Alfa Romeo Mito come from 2 brands — ELRING and AJUSA.

Part numbers include AJUSA 15091500, ELRING 688580 and ELRING 290710.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts are listed for the 2012 Alfa Romeo Mito, from ELRING and AJUSA.

Listed part numbers: AJUSA 54174500, ELRING 431560 and ELRING 928760, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts for the 2012 Alfa Romeo Mito come from 2 brands — ELRING and AJUSA. The "Popular" part is ELRING 069540.

This group includes ELRING 069540, AJUSA 15081900 and AJUSA 71001000 and the remaining parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts are listed for the 2012 Alfa Romeo Mito, from ELRING and AJUSA.

Part numbers include AJUSA 81025400, ELRING 111590 and ELRING 760720.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts are listed for the 2012 Alfa Romeo Mito, from ELRING and AJUSA.

Part numbers include AJUSA 10184500, ELRING 344661 and ELRING 040554, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts are listed for the 2012 Alfa Romeo Mito, from ELRING and AJUSA. ELRING 928770 carries the "Popular" badge.

Listed part numbers: ELRING 928770, AJUSA 52286400 and ELRING 334690, plus the other parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2012 Alfa Romeo Mito — AJUSA 50306200.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts are listed for the 2012 Alfa Romeo Mito, from ELRING and AJUSA.

Part numbers include AJUSA 77000900, ELRING 444760 and ELRING 730310.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Plenum Gasket parts for the 2012 Alfa Romeo Mito come from ELRING.

This group includes ELRING 334670 and ELRING 689940.

This table covers the drain plugs in the oil pan. Read more

3 Oil Drain Plug parts for the 2012 Alfa Romeo Mito come from ELRING.

Listed part numbers: ELRING 587100, ELRING 873140 and ELRING 878110.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 2012 Alfa Romeo Mito, from AJUSA and ELRING.

Listed part numbers: AJUSA 21012200 and ELRING 110604.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

8 Oil Filter parts for the 2012 Alfa Romeo Mito come from 8 brands — PRO-TEC, CHAMP / LUBER-FINER, FVP and 5 other brands. The "Popular" part is PRO-TEC PXL57341.

The Economy section lists 5 options from PRO-TEC, CHAMP / LUBER-FINER, FVP and 2 other brands — the catalog's value-priced group. PRO-TEC PXL57341 is listed in this group.

In the Standard Replacement grade, WIX, MAHLE / CLEVITE and MANN supply 3 parts: built to original-equipment specification. A representative part number is WIX 57341.

Part numbers include PRO-TEC PXL57341, CHAMP / LUBER-FINER P993 and FVP G7341, among others listed above.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2012 Alfa Romeo Mito — ELRING 944180.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 030793.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2012 Alfa Romeo Mito — ELRING 725830.

This table covers the rings that seal each piston to the cylinder wall. Read more

HASTINGS MANUFACTURING supplies both parts for the 2012 Alfa Romeo Mito.

Listed part numbers: HASTINGS MANUFACTURING 2N4104S and HASTINGS MANUFACTURING 2N4104.

This table covers the Timing Belt pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt. Read more

This group shows a single part: INA ZT04143.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 01248700.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2012 Alfa Romeo Mito — ELRING 538350.

This table covers the fasteners that mount the turbocharger. Read more

One part is listed for the 2012 Alfa Romeo Mito — ELRING 796230.

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: ELRING 068730.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Valve Cover Gasket parts for the 2012 Alfa Romeo Mito come from 2 brands — ELRING and AJUSA. The "Popular" part is AJUSA 56047300.

This group includes AJUSA 56047300, ELRING 199010 and AJUSA 11121400 and the remaining parts above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: AJUSA 85002700.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts for the 2012 Alfa Romeo Mito come from 2 brands — ELRING and AJUSA.

Listed part numbers: AJUSA 57023600, ELRING 476691 and ELRING 069630, plus the other parts above.

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2012 Alfa Romeo Mito — ELRING 492953.