1949 Allard J1 Cooling System Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

This page lists 16 cooling system parts for the 1949 Allard J1, across 3 part types, covering both the 3.6L 221cid V8 and the 3.9L 239cid V8. Every part shows its brand, manufacturer part number and fitment notes.

On the 1949 Allard J1, the cooling system system keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses. All 16 listed parts are Coolant / Antifreeze (11 parts), Thermostat / Thermostat Housing / Water Outlet Seal (3 parts) and Water Pump Gasket (2 parts).

Coolant / Antifreeze

Economy

Brand Part Number Markets Notes Buy
PEAK Fits: all 1949 J1 engines BQA1GAL
🇺🇸 US
Blue Mountain Long LifeAll Vehicle
Fitment notes — PEAK BQA1GAL
Blue Mountain Long LifeAll Vehicle1 Gallon
View on
Amazon
VALVOLINE Fits: all 1949 J1 engines 719009
🇺🇸 US
Multi-Vehicle Yellow1 Gallon
View on
Amazon

Premium

Brand Part Number Markets Notes Buy
PEAK Fits: all 1949 J1 engines PKP1GAL
🇺🇸 US
All Vehicles Antifreeze1 Gallon
Fitment notes — PEAK PKP1GAL
All Vehicles Antifreeze1 GallonPREMIUM1 GALLON10X MORE SCALE FIGHTING INHIBITORS10 YEAR/300K MILES
View on
Amazon
PEAK Fits: all 1949 J1 engines PXA1GAL
🇺🇸 US
Global Lifetime1 Gallon
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
FVP Popular Fits: all 1949 J1 engines GREEN5050GAL
🇺🇸 US
Low Silicate Blend1 Gallon
Fitment notes — FVP GREEN5050GAL
Low Silicate Blend1 GallonGreenIAT
View on
Amazon
PRESTONE Popular Fits: all 1949 J1 engines AF3300
🇺🇸 US
Prime Conventional Green 1 Gallon
View on
Amazon
VALVOLINE Popular Fits: all 1949 J1 engines ZX001
🇺🇸 US
Original Green1 Gallon
Fitment notes — VALVOLINE ZX001
Original Green1 GallonLow-SilicateIAT
View on
Amazon
PEAK Fits: all 1949 J1 engines BMA1GAL
🇺🇸 US
Blue Mountain Conventional Green1 Gallon
View on
Amazon
PEAK Fits: all 1949 J1 engines RUA1GAL
🇺🇸 US
Conventional Green1 Gallon
Fitment notes — PEAK RUA1GAL
Conventional Green1 GallonBlue MountainConventional GreenOlder Vehicle
View on
Amazon
PEAK Fits: all 1949 J1 engines FFA1GAL
🇺🇸 US
Full Force Conventional Green1 Gallon
Fitment notes — PEAK FFA1GAL
Full Force Conventional Green1 GallonFULL FORCE CONVENTIONAL GREEN 1 Gallon
View on
Amazon
PEAK Fits: all 1949 J1 engines SEP1GAL
🇺🇸 US
Sierra Conventional Green Concentrate Low Toxic Option1 Gallon
Fitment notes — PEAK SEP1GAL
Sierra Conventional Green Concentrate Low Toxic Option1 GallonPropylene Glycol (PG) Antifreeze1 Gallon
(Type: Concentrated)
View on
Amazon

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator.

Thermostat / Thermostat Housing / Water Outlet Seal

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 3.9L 239cid V8 35067
🇺🇸 US
1-13/16 (In) Inside DiameterWater Outlet Seal
View on
Amazon
MAHLE / CLEVITE Fits: 3.9L 239cid V8 C24109
🇺🇸 US
PaperUniversal Type
Fitment notes — MAHLE / CLEVITE C24109
PaperUniversal Type
without Water Bypass HoseWater Outlet Seal
View on
Amazon
VICTOR REINZ Fits: 3.9L 239cid V8 711352100
🇺🇸 US
1-13/16 IN I.D.Water Outlet Seal
View on
Amazon

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Water Pump Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 3.9L 239cid V8 2972
🇺🇸 US
To Block
View on
Amazon
VICTOR REINZ Fits: 3.9L 239cid V8 711383100
🇺🇸 US
View on
Amazon

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Buying Cooling System Parts for a 1949 Allard J1

On this vehicle, the cooling system system keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses.

  • Match the engine first. Some cooling system parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Coolant / Antifreeze and Thermostat / Thermostat Housing / Water Outlet Seal .

Frequently Asked Questions

How many cooling system parts fit the 1949 Allard J1?

Our catalog currently lists 16 cooling system parts for the 1949 Allard J1 across 3 subcategories and 7 brands, covering both the 3.6L 221cid V8 and the 3.9L 239cid V8. Each part is matched to the engine(s) it fits.

Do cooling system parts differ between 1949 Allard J1 engines?

Some do. 11 parts fit every engine; the other 5 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of cooling system problems on a 1949 Allard J1?

Common symptoms include a rising temperature gauge in traffic, sweet-smelling steam, crusty deposits around hose clamps, or a heater that blows cold. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1949 Allard J1 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1949 Allard J1?

First match the engine — each row shows which engine(s) the part fits. Then replace coolant with the exact specification the manufacturer calls for — mixing chemistries can gel and block small passages. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1949 Allard J1

Cooling System Parts for Other Allard J1 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.