This page lists 34 engine parts for the 1949 Allard M, across 8 part types, covering both the 3.6L 221cid V8 and the 3.9L 239cid V8. Every part shows its brand, manufacturer part number and fitment notes.
The engine on the 1949 Allard M covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Cylinder Head Gasket (13 parts), Engine Kit Gasket Set (9 parts) and Intake Manifold Gasket (4 parts). The other 5 part types cover the remaining 8 parts.
The 1949 Allard M was sold with both the 3.6L 221cid V8 and the 3.9L 239cid V8. 3 parts fit every engine; the other 31 are engine-specific. Each part shows which engine(s) it fits.
4 brands supply engine parts for the 1949 Allard M, led by FEL-PRO (15 parts), VICTOR REINZ (14 parts) and MAHLE / CLEVITE (4 parts), plus 1 more brand.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1949 Allard M. 4 parts have it, including FEL-PRO 7526B (Cylinder Head Gasket) and FEL-PRO FS7283B (Engine Kit Gasket Set). Each part number opens a page with every vehicle that part fits.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ Fits: all 1949 M engines | 191001901 | 🇺🇸 US | Set | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: VICTOR REINZ 191001901.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.9L 239cid V8 | 7526B | 🇺🇸 US | LeftStandard Bore 3.270 (in) | View on Amazon |
| FEL-PRO Popular Fits: 3.9L 239cid V8 | 7525B | 🇺🇸 US | RightStandard Bore 3.270 (in) | View on Amazon |
| FEL-PRO Fits: 3.6L 221cid V8 | 7283B | 🇺🇸 US | with 90 Horsepower Enginewith 24 Stud Head | View on Amazon |
| FEL-PRO Fits: 3.6L 221cid V8 | 7548B | 🇺🇸 US | with 90 Horsepower Enginewith 24 Stud Head | View on Amazon |
| FEL-PRO Fits: 3.9L 239cid V8 | 7525B1 | 🇺🇸 US | Right3.420 (in) Oversize | View on Amazon |
| FEL-PRO Fits: 3.9L 239cid V8 | 7526B1 | 🇺🇸 US | Left3.420 (in) Oversize | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L 239cid V8 | 1084K | 🇺🇸 US | Composite | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L 239cid V8 | 55142 | 🇺🇸 US | Right3.42 IN Overbore | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L 239cid V8 | 55147 | 🇺🇸 US | Left3.42 IN Overbore | View on Amazon |
| VICTOR REINZ Fits: 3.6L 221cid V8 | 611062200 | 🇺🇸 US | with 24 Stud Headwith Three Large Irregular Water Holes On Centerline | View on Amazon |
| VICTOR REINZ Fits: 3.6L 221cid V8 | 611062100 | 🇺🇸 US | with 90 Horsepower Enginewith 2 Small Round Water Holes on Centerline | View on Amazon |
| VICTOR REINZ Fits: 3.9L 239cid V8 | 611060500 | 🇺🇸 US | Left3.270 IN Bore Diameter | View on Amazon |
| VICTOR REINZ Fits: 3.9L 239cid V8 | 611063400 | 🇺🇸 US | Left3.420 IN Bore Diameter | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
13 Cylinder Head Gasket parts are listed for the 1949 Allard M, from FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. FEL-PRO 7526B carries the "Popular" badge.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.9L 239cid V8 | HS7525B | 🇺🇸 US | Includes Valve Stem Seals | View on Amazon |
| VICTOR REINZ Fits: 3.9L 239cid V8 | 021022501 | 🇺🇸 US | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Cylinder Head Gasket Set parts are listed for the 1949 Allard M, from FEL-PRO and VICTOR REINZ.
Part numbers include FEL-PRO HS7525B and VICTOR REINZ 021022501.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.6L 221cid V8 | FS7283B | 🇺🇸 US | Overhaul Set | View on Amazon |
| FEL-PRO Popular Fits: 3.6L 221cid V8 | FS7548B | 🇺🇸 US | Overhaul Set | View on Amazon |
| FEL-PRO Fits: 3.6L 221cid V8 | FS7246S2 | 🇺🇸 US | Overhaul Set | View on Amazon |
| FEL-PRO Fits: 3.9L 239cid V8 | FS7525B | 🇺🇸 US | Overhaul Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L 239cid V8 | FS1084K | 🇺🇸 US | Full Set | View on Amazon |
| VICTOR REINZ Fits: 3.6L 221cid V8 | 011032401 | 🇺🇸 US | with 24 Stud Headwith 3 Water Holes On Centerline | View on Amazon |
| VICTOR REINZ Fits: 3.6L 221cid V8 | 011033001 | 🇺🇸 US | with 2 Water Holes On Centerlinewith 24 Stud Head | View on Amazon |
| VICTOR REINZ Fits: 3.6L 221cid V8 | 011033301 | 🇺🇸 US | with 21 Stud Head | View on Amazon |
| VICTOR REINZ Fits: 3.9L 239cid V8 | 011006301 | 🇺🇸 US | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
9 Engine Kit Gasket Set parts are listed for the 1949 Allard M, from FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. FEL-PRO FS7283B carries the "Popular" badge.
This group includes FEL-PRO FS7283B, FEL-PRO FS7548B and FEL-PRO FS7246S2 and the remaining parts above.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.6L 221cid V8 | MS2853 | 🇺🇸 US | Set | View on Amazon |
| FEL-PRO Fits: 3.9L 239cid V8 | MS8903 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ Fits: 3.6L 221cid V8 | 111036701 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ Fits: 3.9L 239cid V8 | 111036901 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Intake Manifold Gasket parts are listed for the 1949 Allard M, from FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO MS2853, FEL-PRO MS8903 and VICTOR REINZ 111036701 and the remaining parts above.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.9L 239cid V8 | OS2996C1 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ Fits: 3.9L 239cid V8 | 101006801 | 🇺🇸 US | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pan Gasket parts for the 1949 Allard M come from 2 brands — FEL-PRO and VICTOR REINZ.
Listed part numbers: FEL-PRO OS2996C1 and VICTOR REINZ 101006801.
Piston
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SILV-O-LITE Fits: 3.9L 239cid V8 | 1058 | 🇺🇸 US | Floating Pin TypeOffset Pin Configuration | View on Amazon |
This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.
One part is listed for the 1949 Allard M — SILV-O-LITE 1058.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: all 1949 M engines | SS5566 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ Fits: all 1949 M engines | 121016301 | 🇺🇸 US | Set | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Valve Stem Seal parts for the 1949 Allard M come from 2 brands — FEL-PRO and VICTOR REINZ. Every part fits both the 3.6L 221cid V8 and the 3.9L 239cid V8.
This group includes FEL-PRO SS5566 and VICTOR REINZ 121016301.
Buying Engine Parts for a 1949 Allard M
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Cylinder Head Gasket and Engine Kit Gasket Set .
Frequently Asked Questions
How many engine parts fit the 1949 Allard M?
Our catalog currently lists 34 engine parts for the 1949 Allard M across 8 subcategories and 4 brands, covering both the 3.6L 221cid V8 and the 3.9L 239cid V8. Each part is matched to the engine(s) it fits.
Do engine parts differ between 1949 Allard M engines?
Some do. 3 parts fit every engine; the other 31 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 1949 Allard M?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1949 Allard M was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1949 Allard M?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1949 Allard M
Engine Parts for Other Allard M Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.