1951 Allard K2 Ignition Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

16 Ignition parts are listed for the 1951 Allard K2, in 2 part types, covering all 3 engine options (3.6L V8, 3.9L V8 and 4.4L V8). Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1951 Allard K2, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 16 listed parts are Ignition Coil (8 parts) and Spark Plug (8 parts).

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular Fits: all 1951 K2 engines UC15T
🇺🇸 US
T-Series
View on
Amazon
FVP Fits: all 1951 K2 engines UC15F
🇺🇸 US
View on
Amazon
HOLSTEIN Fits: all 1951 K2 engines 2IGC0058
🇺🇸 US
View on
Amazon
SKP Fits: all 1951 K2 engines SKUC15T
🇺🇸 US
Coil Pack
View on
Amazon
SPECTRA PREMIUM Fits: all 1951 K2 engines C622
🇺🇸 US
PackInternal Resistor Coil
Fitment notes — SPECTRA PREMIUM C622
PackInternal Resistor Coil12 Volt
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular Fits: all 1951 K2 engines UC15
🇺🇸 US
View on
Amazon
UNITED MOTOR PRODUCTS Fits: all 1951 K2 engines C15
🇺🇸 US
View on
Amazon
WELLS Fits: all 1951 K2 engines 5C1019
🇺🇸 US
Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil
Fitment notes — WELLS 5C1019
Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil
12 VoltInternal Resistor Coil
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Summary: Notes include pre-set gaps of 0.024", 0.025", 0.030", 0.032", 0.034" and 0.035". Replacement brands in this table include CHAMPION, ACDELCO and MOTORCRAFT.

Copper / Nickel

Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: all 1951 K2 engines R44XL
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R44XL
ProfessionalConventionalPre-Set Gap: 0.034"
Original Equipment-Recommended Gap: .032
View on
Amazon
CHAMPION Popular Fits: 4.4L V8 844
🇺🇸 US
Copper PlusPre-Set Gap: 0.03"
Fitment notes — CHAMPION 844
Copper PlusPre-Set Gap: 0.03"
Mercury Engine(s)Non-Resistor TypeOE-Recommended Gap: 0.030"
View on
Amazon
CHAMPION Fits: 3.6L V8 516
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 516
Copper PlusPre-Set Gap: 0.025"
Ford Pilot Engine(s)Non-Resistor TypeOE-Recommended Gap: 0.024"
View on
Amazon
CHAMPION Fits: 3.6L V8 541
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 541
Copper PlusPre-Set Gap: 0.025"
Ford Pilot Engine(s)Resistor TypeOE-Recommended Gap: 0.024"
View on
Amazon
CHAMPION Fits: 4.4L V8 8441
🇺🇸 US
Copper Plus
Fitment notes — CHAMPION 8441
Copper Plus
Mercury Engine(s)Non-Resistor TypeOE-Recommended Gap: 0.030"
View on
Amazon
CHAMPION Fits: 4.4L V8 854
🇺🇸 US
Copper PlusPre-Set Gap: 0.03"
Fitment notes — CHAMPION 854
Copper PlusPre-Set Gap: 0.03"
Mercury Engine(s)Resistor TypeOE-Recommended Gap: 0.030"
View on
Amazon
MOTORCRAFT Fits: all 1951 K2 engines SP466
🇺🇸 US
Copper
Fitment notes — MOTORCRAFT SP466
Copper
OE Style.032"/0.8mm
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO Fits: all 1951 K2 engines 41832
🇺🇸 US 🇨🇦 CA
ProfessionalDouble Platinum
Fitment notes — ACDELCO 41832
ProfessionalDouble PlatinumPre-Set Gap: 0.035"
OE-Recommended Gap: 0.032"
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1951 Allard K2

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Match the engine first. Some ignition parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Ignition Coil and Spark Plug .

Frequently Asked Questions

How many ignition parts fit the 1951 Allard K2?

Our catalog currently lists 16 ignition parts for the 1951 Allard K2 across 2 subcategories and 10 brands, covering all 3 engine options (3.6L V8, 3.9L V8 and 4.4L V8). Each part is matched to the engine(s) it fits.

Do ignition parts differ between 1951 Allard K2 engines?

Some do. 11 parts fit every engine; the other 5 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of ignition problems on a 1951 Allard K2?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1951 Allard K2?

Notes on this page include pre-set gaps of 0.024", 0.025", 0.030", 0.032", 0.034" and 0.035". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1951 Allard K2 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1951 Allard K2?

First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1951 Allard K2

Ignition Parts for Other Allard K2 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.