13 Ignition parts are listed for the 1952 Allard Palm Beach, in 2 part types, covering both the 1.5L L4 and the 2.3L L6. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1952 Allard Palm Beach, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 13 listed parts are Ignition Coil (8 parts) and Spark Plug (5 parts).
The 1952 Allard Palm Beach was sold with both the 1.5L L4 and the 2.3L L6. All 13 parts on this page fit every engine.
The most listed brands for 1952 Allard Palm Beach ignition parts are CHAMPION (3 parts), STANDARD MOTOR PRODUCTS (2 parts) and FVP (1 part), plus 7 more brands. Quality grades include Economy and Standard Replacement.
3 parts on this 1952 Allard Palm Beach page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including STANDARD MOTOR PRODUCTS UC15T (Ignition Coil) and ACDELCO R44XL (Spark Plug). Click any part number to see every vehicle that part fits.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: all 1952 Palm Beach engines | UC15T | 🇺🇸 US | T-Series | View on Amazon |
| FVP Fits: all 1952 Palm Beach engines | UC15F | 🇺🇸 US | View on Amazon | |
| HOLSTEIN Fits: all 1952 Palm Beach engines | 2IGC0058 | 🇺🇸 US | View on Amazon | |
| SKP Fits: all 1952 Palm Beach engines | SKUC15T | 🇺🇸 US | Coil Pack | View on Amazon |
| SPECTRA PREMIUM Fits: all 1952 Palm Beach engines | C622 | 🇺🇸 US | PackInternal Resistor Coil | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: all 1952 Palm Beach engines | UC15 | 🇺🇸 US | View on Amazon | |
| UNITED MOTOR PRODUCTS Fits: all 1952 Palm Beach engines | C15 | 🇺🇸 US | View on Amazon | |
| WELLS Fits: all 1952 Palm Beach engines | 5C1019 | 🇺🇸 US | Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
8 Ignition Coil parts are listed for the 1952 Allard Palm Beach, from STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 4 other brands. STANDARD MOTOR PRODUCTS UC15T carries the "Popular" badge. All of them fit every engine offered in the 1952 Palm Beach.
In the Economy grade, STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 2 other brands supply 5 parts: the catalog's value-priced group. A representative part number is STANDARD MOTOR PRODUCTS UC15T.
The Standard Replacement section lists 3 options from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS — built to original-equipment specification. STANDARD MOTOR PRODUCTS UC15 is listed in this group.
This group includes STANDARD MOTOR PRODUCTS UC15T, FVP UC15F and HOLSTEIN 2IGC0058 and the remaining parts above.
Spark Plug
Summary: Notes include pre-set gaps of 0.025", 0.032" and 0.034". Both engines share the same gaps. Replacement brands in this table include CHAMPION, ACDELCO and MOTORCRAFT.
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: all 1952 Palm Beach engines | R44XL | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| CHAMPION Fits: all 1952 Palm Beach engines | 315 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION Fits: all 1952 Palm Beach engines | 332 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION Fits: all 1952 Palm Beach engines | 3321 | 🇺🇸 US | Copper Plus | View on Amazon |
| MOTORCRAFT Fits: all 1952 Palm Beach engines | SP466 | 🇺🇸 US | Copper | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
5 Spark Plug parts for the 1952 Allard Palm Beach come from 3 brands — CHAMPION, ACDELCO and MOTORCRAFT. The "Popular" part is ACDELCO R44XL. Every part fits both the 1.5L L4 and the 2.3L L6.
Listed part numbers: ACDELCO R44XL, CHAMPION 315 and CHAMPION 332, plus the other parts above.
Buying Ignition Parts for a 1952 Allard Palm Beach
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- You do not need to pick an engine: every ignition part on this page fits both the 1.5L L4 and the 2.3L L6.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil and Spark Plug .
Frequently Asked Questions
How many ignition parts fit the 1952 Allard Palm Beach?
Our catalog currently lists 13 ignition parts for the 1952 Allard Palm Beach across 2 subcategories and 10 brands, covering both the 1.5L L4 and the 2.3L L6. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 1952 Allard Palm Beach engines?
No. On this page every ignition part fits both the 1.5L L4 and the 2.3L L6. You do not need to pick an engine to choose the right row — use the notes for position and trim.
What are the signs of ignition problems on a 1952 Allard Palm Beach?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1952 Allard Palm Beach?
Notes on this page include pre-set gaps of 0.025", 0.032" and 0.034". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1952 Allard Palm Beach was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1952 Allard Palm Beach?
Every part on this page already fits both the 1.5L L4 and the 2.3L L6. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1952 Allard Palm Beach
Ignition Parts for Other Allard Palm Beach Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.