1952 Allstate A-230 Ignition Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

The 1952 Allstate A-230 has 24 ignition parts with verified fitment on this page — 7 part types and 10 brands, covering both the 2.2L 134cid L4 and the 2.6L 161cid L6. Each part includes a manufacturer part number and application notes.

On the 1952 Allstate A-230, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. 18 parts of the 24 listed are Distributor Rotor (6 parts), Ignition Coil (6 parts) and Spark Plug (6 parts). The other 4 part types cover the remaining 6 parts.

Condenser / Capacitor

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: all 1952 A-230 engines AL111T
🇺🇸 US
T-Series
Fitment notes — STANDARD MOTOR PRODUCTS AL111T
T-Series
vendor # Autolite, Ford or Motorcraft
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: all 1952 A-230 engines DR60T
🇺🇸 US
T-SeriesTerminal Type: Blade, Eye-loop
Fitment notes — STANDARD MOTOR PRODUCTS DR60T
T-SeriesTerminal Type: Blade, Eye-loop
Vendor Delco
View on
Amazon

This table covers the capacitors used in this electrical or A/C circuit.

Distributor Cap

Brand Part Number Markets Notes Buy
LILAND GLOBAL Fits: 2.2L 134cid L4 AL132BALG
🇺🇸 US
Black AluminumBody Material: Phenolic
View on
Amazon

This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.

Distributor Rotor

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular Fits: all 1952 A-230 engines DR158T
🇺🇸 US
T-Series
Fitment notes — STANDARD MOTOR PRODUCTS DR158T
T-Series
Vendor Delco
View on
Amazon
UNITED MOTOR PRODUCTS Fits: all 1952 A-230 engines DR650
🇺🇸 US
with Delco Distributor
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular Fits: all 1952 A-230 engines DR158
🇺🇸 US
Vendor Delco
View on
Amazon
LILAND GLOBAL Fits: all 1952 A-230 engines DR158LG
🇺🇸 US
PremiumBlack Brass
View on
Amazon
LILAND GLOBAL Fits: all 1952 A-230 engines AL150LG
🇺🇸 US
PremiumBlack Brass
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: all 1952 A-230 engines AL150
🇺🇸 US
vendor # Autolite
View on
Amazon

This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.

Ignition Breaker Points

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: 2.2L 134cid L4 AL4556PT
🇺🇸 US
T-Series
Fitment notes — STANDARD MOTOR PRODUCTS AL4556PT
T-Series
Autolite, Ford or Motorcraft
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
UNITED MOTOR PRODUCTS Fits: 2.2L 134cid L4 CP006
🇺🇸 US
Autolite Ford or Motorcraft
View on
Amazon

This table covers the breaker points in a points-type distributor.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular Fits: all 1952 A-230 engines UC14T
🇺🇸 US
T-Series6 Volt
View on
Amazon
FVP Fits: all 1952 A-230 engines UC14F
🇺🇸 US
View on
Amazon
HOLSTEIN Fits: all 1952 A-230 engines 2IGC0057
🇺🇸 US
View on
Amazon
SPECTRA PREMIUM Fits: all 1952 A-230 engines C660
🇺🇸 US
Pack
View on
Amazon

Premium

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular Fits: all 1952 A-230 engines UC14
🇺🇸 US
Blue Streak6 Volt
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
UNITED MOTOR PRODUCTS Fits: all 1952 A-230 engines C14
🇺🇸 US
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Ignition Coil Mounting Bracket

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: 2.2L 134cid L4 CB6
🇺🇸 US
View on
Amazon

This table covers the brackets that mount the Ignition Coil Mounting. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.

Spark Plug

Summary: Notes include pre-set gaps of 0.030" and 0.040". Both engines share the same gaps. Replacement brands in this table include CHAMPION, ACDELCO and AUTOLITE.

Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: all 1952 A-230 engines R45
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R45
ProfessionalConventionalPre-Set Gap: 0.040"
Original Equipment-Recommended Gap: .030
View on
Amazon
AUTOLITE Fits: all 1952 A-230 engines 295
🇺🇸 US
Copper Non-ResistorPre-Set Gap: 0.030"
Fitment notes — AUTOLITE 295
Copper Non-ResistorPre-Set Gap: 0.030"
Gap .030 (In) 0.8 (mm)Non-Resistor PlugOE Style
View on
Amazon
CHAMPION Fits: all 1952 A-230 engines 841
🇺🇸 US
Copper PlusPre-Set Gap: 0.03"
Fitment notes — CHAMPION 841
Copper PlusPre-Set Gap: 0.03"
Non-Resistor TypeOE-Recommended Gap: 0.030"
View on
Amazon
CHAMPION Fits: all 1952 A-230 engines 8411
🇺🇸 US
Copper Plus
Fitment notes — CHAMPION 8411
Copper Plus
Non-Resistor TypeOE-Recommended Gap: 0.030"
View on
Amazon
CHAMPION Fits: all 1952 A-230 engines 871
🇺🇸 US
Copper PlusPre-Set Gap: 0.03"
Fitment notes — CHAMPION 871
Copper PlusPre-Set Gap: 0.03"
Resistor TypeOE-Recommended Gap: 0.030"
View on
Amazon
MOTORCRAFT Fits: all 1952 A-230 engines SP477
🇺🇸 US
Nickel
Fitment notes — MOTORCRAFT SP477
Nickel
ResistorGap: .030
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1952 Allstate A-230

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Match the engine first. Some ignition parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Distributor Rotor and Ignition Coil .

Frequently Asked Questions

How many ignition parts fit the 1952 Allstate A-230?

Our catalog currently lists 24 ignition parts for the 1952 Allstate A-230 across 7 subcategories and 10 brands, covering both the 2.2L 134cid L4 and the 2.6L 161cid L6. Each part is matched to the engine(s) it fits.

Do ignition parts differ between 1952 Allstate A-230 engines?

Some do. 20 parts fit every engine; the other 4 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of ignition problems on a 1952 Allstate A-230?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1952 Allstate A-230?

Notes on this page include pre-set gaps of 0.030" and 0.040". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1952 Allstate A-230 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1952 Allstate A-230?

First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1952 Allstate A-230

Ignition Parts for Other Allstate A-230 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.