The 1953 Allstate A-230 has 25 engine parts with verified fitment on this page — 10 part types and 8 brands, covering both the 2.2L 134cid L4 and the 2.6L 161cid L6. Each part includes a manufacturer part number and application notes.
The engine on the 1953 Allstate A-230 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Crankshaft Seal (5 parts), Crankshaft Repair Sleeve (3 parts) and Oil Pan Gasket (3 parts). The other 7 part types cover the remaining 14 parts.
The 1953 Allstate A-230 was sold with both the 2.2L 134cid L4 and the 2.6L 161cid L6. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 1953 Allstate A-230 engine parts are FEL-PRO (8 parts), VICTOR REINZ (8 parts) and NATIONAL (2 parts), plus 5 more brands.
1 part on this 1953 Allstate A-230 page carries a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — FEL-PRO BS3165 (Crankshaft Seal). Click any part number to see every vehicle that part fits.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: 2.2L 134cid L4 | 99174 | 🇺🇸 US | Front | View on Amazon |
| SCHAEFFLER Fits: 2.2L 134cid L4 | SR3496 | 🇺🇸 US | Frontwith 1.750 In Shaft | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.2L 134cid L4 | WS99174 | 🇺🇸 US | Front | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
3 Crankshaft Repair Sleeve parts are listed for the 1953 Allstate A-230, from NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.
Listed part numbers: NATIONAL 99174, SCHAEFFLER SR3496 and WJB / INMOTION PARTS WS99174.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 2.2L 134cid L4 | BS3165 | 🇺🇸 US | Rope Type | View on Amazon |
| BCA Fits: 2.2L 134cid L4 | NS471504 | 🇺🇸 US | Front | View on Amazon |
| NATIONAL Fits: 2.2L 134cid L4 | 471504 | 🇺🇸 US | Nitrile | View on Amazon |
| VICTOR REINZ Fits: 2.2L 134cid L4 | 191002201 | 🇺🇸 US | Set | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.2L 134cid L4 | WS471504 | 🇺🇸 US | Nitrile | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Crankshaft Seal parts are listed for the 1953 Allstate A-230, from FEL-PRO, BCA, NATIONAL and 2 other brands. FEL-PRO BS3165 carries the "Popular" badge.
Listed part numbers: FEL-PRO BS3165, BCA NS471504 and NATIONAL 471504, plus the other parts above.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.2L 134cid L4 | 7285B | 🇺🇸 US | with Fiber-Faced Head Gasket | View on Amazon |
| VICTOR REINZ Fits: 2.2L 134cid L4 | 611045700 | 🇺🇸 US | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Cylinder Head Gasket parts for the 1953 Allstate A-230 come from 2 brands — FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO 7285B and VICTOR REINZ 611045700.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.2L 134cid L4 | HS7285B | 🇺🇸 US | with Fiber-Faced Head GasketIncludes Valve Stem Seals | View on Amazon |
| VICTOR REINZ Fits: 2.2L 134cid L4 | 021022201 | 🇺🇸 US | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Cylinder Head Gasket Set parts for the 1953 Allstate A-230 come from 2 brands — FEL-PRO and VICTOR REINZ.
Listed part numbers: FEL-PRO HS7285B and VICTOR REINZ 021022201.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.2L 134cid L4 | FS7285B | 🇺🇸 US | Overhaul Setwith Fiber-Faced Head Gasket | View on Amazon |
| VICTOR REINZ Fits: 2.2L 134cid L4 | 011006201 | 🇺🇸 US | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Engine Kit Gasket Set parts for the 1953 Allstate A-230 come from 2 brands — FEL-PRO and VICTOR REINZ.
Listed part numbers: FEL-PRO FS7285B and VICTOR REINZ 011006201.
Intake & Exhaust Manifold Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.2L 134cid L4 | MS8348B | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ Fits: 2.2L 134cid L4 | 711477400 | 🇺🇸 US | View on Amazon |
This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Intake & Exhaust Manifold Gasket Set parts for the 1953 Allstate A-230 come from 2 brands — FEL-PRO and VICTOR REINZ.
Part numbers include FEL-PRO MS8348B and VICTOR REINZ 711477400.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.2L 134cid L4 | OS4350AD | 🇺🇸 US | View on Amazon | |
| MAHLE / CLEVITE Fits: 2.2L 134cid L4 | OS30656 | 🇺🇸 US | Cork-Rubber | View on Amazon |
| VICTOR REINZ Fits: 2.2L 134cid L4 | 101010301 | 🇺🇸 US | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Oil Pan Gasket parts are listed for the 1953 Allstate A-230, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO OS4350AD, MAHLE / CLEVITE OS30656 and VICTOR REINZ 101010301.
Piston
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SILV-O-LITE Fits: 2.2L 134cid L4 | 2606 | 🇺🇸 US | Centered Pin ConfigurationPress Pin Type | View on Amazon |
This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.
This group shows a single part: SILV-O-LITE 2606.
Push Rod Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.2L 134cid L4 | PS4352C | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ Fits: 2.2L 134cid L4 | 181006301 | 🇺🇸 US | View on Amazon |
This table covers the Push Rod gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Push Rod Gasket Set parts are listed for the 1953 Allstate A-230, from FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO PS4352C and VICTOR REINZ 181006301.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.2L 134cid L4 | TCS43511 | 🇺🇸 US | View on Amazon | |
| MAHLE / CLEVITE Fits: 2.2L 134cid L4 | JV797 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ Fits: 2.2L 134cid L4 | 151035901 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Timing Cover Gasket parts are listed for the 1953 Allstate A-230, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO TCS43511, MAHLE / CLEVITE JV797 and VICTOR REINZ 151035901.
Buying Engine Parts for a 1953 Allstate A-230
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Crankshaft Seal and Crankshaft Repair Sleeve .
Frequently Asked Questions
How many engine parts fit the 1953 Allstate A-230?
Our catalog currently lists 25 engine parts for the 1953 Allstate A-230 across 10 subcategories and 8 brands, covering both the 2.2L 134cid L4 and the 2.6L 161cid L6. Each part is matched to the engine(s) it fits.
Do engine parts differ between 1953 Allstate A-230 engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 1953 Allstate A-230?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1953 Allstate A-230 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1953 Allstate A-230?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1953 Allstate A-230
Engine Parts for Other Allstate A-230 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.