1971 American Motors Gremlin Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

This page lists 8 engine parts for the 1971 American Motors Gremlin, across 3 part types, covering all 3 engine options (3.3L 199cid L6, 3.8L 232cid L6 and 4.2L 258cid L6). Every part shows its brand, manufacturer part number and fitment notes.

On the 1971 American Motors Gremlin, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. All 8 listed parts are Oil Drain Plug (5 parts), Oil Drain Plug Gasket (2 parts) and Cylinder Head Plug (1 part).

Cylinder Head Plug

Brand Part Number Markets Notes Buy
DORMAN Fits: 3.3L 199cid L6 116201
🇺🇸 US 🇨🇦 CA
1/4"-28
Fitment notes — DORMAN 116201
1/4"-28
Cylinder Head Freeze Plug7/8"
View on
Amazon

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Oil Drain Plug

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: 3.3L 199cid L6 090031
🇺🇸 US 🇨🇦 CA
1/2-20Double Oversize
View on
Amazon
DORMAN Fits: 3.3L 199cid L6 090015
🇺🇸 US 🇨🇦 CA
Oversize1/2-20 S.O.
Fitment notes — DORMAN 090015
Oversize1/2-20 S.O.Head Size 3/4 In.
1/2-20,Single Oversize
View on
Amazon
DORMAN Fits: 3.3L 199cid L6 090035
🇺🇸 US 🇨🇦 CA
1/2-20Piggy-Back
View on
Amazon
DORMAN Fits: 3.3L 199cid L6 090179
🇺🇸 US 🇨🇦 CA
Universal1/2 In.
Fitment notes — DORMAN 090179
Universal1/2 In.
1/2-20Rubber
View on
Amazon
DORMAN Fits: 3.3L 199cid L6 090051
🇺🇸 US 🇨🇦 CA
MagneticHead Size 3/4 In.
Fitment notes — DORMAN 090051
MagneticHead Size 3/4 In.
Magnetic Oil Drain Plug1/2-20Single Oversize
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
DORMAN Fits: 3.3L 199cid L6 097117
🇺🇸 US 🇨🇦 CA
Includes 25 Nylon Gaskets
Fitment notes — DORMAN 097117
Includes 25 Nylon Gaskets
1/2-20
View on
Amazon
ULTRA-POWER Fits: 3.3L 199cid L6 095001
🇺🇸 US 🇨🇦 CA
Copper
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Buying Engine Parts for a 1971 American Motors Gremlin

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Drain Plug and Oil Drain Plug Gasket .

Frequently Asked Questions

How many engine parts fit the 1971 American Motors Gremlin?

Our catalog currently lists 8 engine parts for the 1971 American Motors Gremlin across 3 subcategories and 2 brands, covering all 3 engine options (3.3L 199cid L6, 3.8L 232cid L6 and 4.2L 258cid L6). Each part is matched to the engine(s) it fits.

Do engine parts differ between 1971 American Motors Gremlin engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 1971 American Motors Gremlin?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1971 American Motors Gremlin was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1971 American Motors Gremlin?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1971 American Motors Gremlin

Engine Parts for Other American Motors Gremlin Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.