1982 American Motors Concord Engine Parts

This table covers the camshafts that open the valves. Read more

5 Camshaft parts are listed for the 1982 American Motors Concord, from ENGINETECH and MELLING.

In the Heavy Duty / Towing grade, ENGINETECH supplies 1 part: grouped under the catalog's "Heavy Duty / Towing" designation — the notes column spells out what sets them apart. A representative part number is ENGINETECH ES1122R.

The Standard Replacement section lists 2 options from ENGINETECH and MELLING — built to original-equipment specification. ENGINETECH ES713 is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

Listed part numbers: ENGINETECH ES1122R, ENGINETECH ES713 and MELLING SRC8, plus the other parts above.

This table covers the Camshaft & Lifter kits. Read more

One part is listed for the 1982 American Motors Concord — MELLING CLSRC8.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Camshaft Bearing parts are listed for the 1982 American Motors Concord, from DURA-BOND, ENGINETECH, MAHLE / CLEVITE and 2 other brands. ENGINETECH CC402 carries the "Popular" badge.

This table covers the Camshaft bolts. Read more

3 Camshaft Bolt parts for the 1982 American Motors Concord come from PIONEER.

Part numbers include PIONEER PG221, PIONEER PG220 and PIONEER PG223.

This table covers the Camshaft hardware kits. Read more

One part is listed for the 1982 American Motors Concord — ENGINETECH HK113.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

DORMAN supplies the 3 Camshaft Plug parts for the 1982 American Motors Concord. 1 part fits every engine; the other 2 are engine-specific.

Listed part numbers: DORMAN 555080, DORMAN 555076 and DORMAN 570016.

This table covers the Camshaft Shim washers. Read more

This group shows a single part: MELLING MG221.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 1982 American Motors Concord — ENGINETECH ECR110.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

18 Connecting Rod Bearing parts are listed for the 1982 American Motors Concord, from MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 1 other brand. ENGINETECH BB600J carries the "Popular" badge.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts are listed for the 1982 American Motors Concord, from VICTOR REINZ, AJUSA and FEL-PRO.

Part numbers include AJUSA 54287000, FEL-PRO CS81692 and VICTOR REINZ 081010001, among others listed above.

This table covers the crankshafts that turn piston motion into rotation. Read more

One part is listed for the 1982 American Motors Concord — ENGINETECH 251700.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Crankshaft Main Bearing parts for the 1982 American Motors Concord come from 4 brands — MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand. The "Popular" part is ENGINETECH BC297J.

This group includes ENGINETECH BC297J, ENGINETECH BC315J and KING ENGINE BEARINGS MB5532SI and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

13 Crankshaft Repair Sleeve parts for the 1982 American Motors Concord come from 6 brands — TIMKEN, WJB / INMOTION PARTS, NATIONAL and 3 other brands. The "Popular" part is NATIONAL 99176.

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

2 Crankshaft Repair Sleeve Tool parts for the 1982 American Motors Concord come from 2 brands — FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 16304 and VICTOR REINZ 711620500.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

23 Crankshaft Seal parts for the 1982 American Motors Concord come from 11 brands — NATIONAL, TIMKEN, WJB / INMOTION PARTS and 8 other brands. The "Popular" part is FEL-PRO BS40612.

This table covers the Cylinder Head Alignment Dowel pins. Read more

One part is listed for the 1982 American Motors Concord — PIONEER PG225.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts are listed for the 1982 American Motors Concord, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

This group includes AJUSA 10241900, FEL-PRO 9405PT1 and FEL-PRO 8778PT and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts are listed for the 1982 American Motors Concord, from FEL-PRO, MAHLE / CLEVITE, VICTOR REINZ and 1 other brand.

This group includes AJUSA 52538800, FEL-PRO HS8686PT1 and FEL-PRO HS8778PT and the remaining parts above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

3 Cylinder Head Plug parts for the 1982 American Motors Concord come from DORMAN.

This group includes DORMAN 570012, DORMAN 565069 and DORMAN 116201.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

6 Cylinder Repair Sleeve parts are listed for the 1982 American Motors Concord, from MELLING and ENGINETECH.

Part numbers include ENGINETECH ESL159, ENGINETECH ESL120 and MELLING CSL1170, among others listed above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

3 Engine Block Heater parts for the 1982 American Motors Concord come from KAT'S HEATERS.

Listed part numbers: KAT'S HEATERS 16600, KAT'S HEATERS 13100 and KAT'S HEATERS 11611.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Engine Kit Gasket Set parts are listed for the 1982 American Motors Concord, from ENGINETECH, FEL-PRO, AJUSA and 3 other brands. FEL-PRO 2601134 carries the "Popular" badge.

Listed part numbers: FEL-PRO 2601134, AJUSA 50487800 and ENGINE PRO 301134, plus the other parts above.

This table covers the Engine rebuild kits. Read more

ENGINETECH supplies the 7 Engine Rebuild Kit parts for the 1982 American Motors Concord.

Listed part numbers: ENGINETECH MKP151RAP, ENGINETECH RCP151R and ENGINETECH RCP151RP, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts for the 1982 American Motors Concord come from 4 brands — QUALCAST, ENGINETECH, MELLING and 1 other brand.

Listed part numbers: ENGINETECH V1911, MELLING V1437 and QUALCAST 101437, plus the other parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

34 Expansion Plug parts are listed for the 1982 American Motors Concord, from PIONEER, DORMAN, MELLING and 3 other brands. DORMAN 555103 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

9 Harmonic Balancer Repair Sleeve parts for the 1982 American Motors Concord come from 6 brands — MAHLE / CLEVITE, NATIONAL, PIONEER and 3 other brands. The "Popular" part is MAHLE / CLEVITE A228.

Part numbers include MAHLE / CLEVITE A228, NATIONAL 88176 and ENGINETECH HS228, among others listed above.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Intake & Exhaust Manifold Gasket Set parts are listed for the 1982 American Motors Concord, from MAHLE / CLEVITE, AJUSA, FEL-PRO and 1 other brand. MAHLE / CLEVITE MS15510 carries the "Popular" badge.

This group includes MAHLE / CLEVITE MS15510, AJUSA 13133700 and FEL-PRO MS90949 and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts are listed for the 1982 American Motors Concord, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO MS90563, MAHLE / CLEVITE MS15304 and VICTOR REINZ 111039301.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 00808300.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Intake Valve parts for the 1982 American Motors Concord come from 3 brands — QUALCAST, ENGINETECH and SBI.

Part numbers include ENGINETECH V1910, QUALCAST 101438 and QUALCAST 101442, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

10 Motor Mount parts for the 1982 American Motors Concord come from 5 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 2 other brands. The "Popular" part is ENERGY SUSPENSION 21102G.

The High Performance section lists 1 option from ENERGY SUSPENSION — engineered beyond original-equipment specification. ENERGY SUSPENSION 21102G is listed in this group.

Standard Replacement: 5 parts, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. A representative part number is DEA / MARMON RIDE CONTROL A2330.

4 further parts sit outside the graded sections, with the same engine-level match.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

19 Oil parts for the 1982 American Motors Concord come from 2 brands — MOBIL and VALVOLINE. The "Popular" part is MOBIL 125195. Every part fits both the 2.5L 151cid L4 and the 4.2L 258cid L6.

The Conventional section lists 3 options from VALVOLINE — grouped under the catalog's "Conventional" designation — the notes column spells out what sets them apart. VALVOLINE 797578 is listed in this group.

The Full Synthetic section lists 7 options from MOBIL and VALVOLINE — full-synthetic oils. MOBIL 125195 is listed in this group.

In the High Mileage (>75,000 Miles) grade, VALVOLINE and MOBIL supply 7 parts: oils grouped for high-mileage engines. A representative part number is MOBIL 125201.

The Synthetic Blend section lists 2 options from MOBIL — synthetic-blend oils. MOBIL 124406 is listed in this group.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 1982 American Motors Concord. All of them fit every engine offered in the 1982 Concord.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

14 Oil Drain Plug parts for the 1982 American Motors Concord come from 3 brands — DORMAN, AGS and NEEDA. The "Popular" part is DORMAN 090034.