1968 Amphicar 770 Ignition Parts

Engine:
1.1L 70cid L4

17 Ignition parts are listed for the 1968 Amphicar 770, in 2 part types, covering the 1.1L 70cid L4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1968 Amphicar 770, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 17 listed parts are Spark Plug (11 parts) and Ignition Coil (6 parts).

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
FVP UC12F
🇺🇸 US
with 12 Volt Systemwith External Resistor
View on
Amazon
SKP SKUC12
🇺🇸 US
with 12 Volt Systemfor with External Resistor.
View on
Amazon
STANDARD MOTOR PRODUCTS UC12T
🇺🇸 US
T-Series
Fitment notes — STANDARD MOTOR PRODUCTS UC12T
T-Series
with 12 Volt Systemwith External Resistor
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ACDELCO Popular U505
🇺🇸 US 🇨🇦 CA
Professional
Fitment notes — ACDELCO U505
Professional
with Female Coil Wire Connectorwith External Resistor12 Volt
View on
Amazon
WELLS Popular 5C1026
🇺🇸 US
Requires External Resistor: YES
Fitment notes — WELLS 5C1026
Requires External Resistor: YES
12 Voltwith External Resistorwith Female Coil Wire Connector
View on
Amazon
STANDARD MOTOR PRODUCTS UC12
🇺🇸 US
with 12 Volt Systemwith External Resistor
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Summary: Notes include pre-set gaps of 0.025", 0.030", 0.032", 0.035" and 0.041". Replacement brands in this table include CHAMPION, ACDELCO and AUTOLITE.

Copper / Nickel

Brand Part Number Markets Notes Buy
ACDELCO Popular R42XLS
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R42XLS
ProfessionalConventionalPre-Set Gap: 0.035"
Original Equipment-Recommended Gap: .0253/4" Reach
View on
Amazon
ACDELCO Popular R44F
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R44F
ProfessionalConventionalPre-Set Gap: 0.030"
Original Equipment-Recommended Gap: .0251/2" Reach
View on
Amazon
CHAMPION Popular 415
🇺🇸 US
Copper PlusPre-Set Gap: 0.032"
Fitment notes — CHAMPION 415
Copper PlusPre-Set Gap: 0.032"
Resistor TypeOE-Recommended Gap: 0.025"
View on
Amazon
AUTOLITE 275
🇺🇸 US
Copper Non-ResistorPre-Set Gap: 0.025"
Fitment notes — AUTOLITE 275
Copper Non-ResistorPre-Set Gap: 0.025"
Gap .025 (In) 0.6 (mm)1/2 In Reach Spark PlugsOE Style
View on
Amazon
CHAMPION 300
🇺🇸 US
Copper PlusPre-Set Gap: 0.032"
Fitment notes — CHAMPION 300
Copper PlusPre-Set Gap: 0.032"
Non-Resistor TypeOE-Recommended Gap: 0.025"
View on
Amazon
CHAMPION 4151
🇺🇸 US
Copper PlusClassification: Champion Copper Plus Small Engine
Fitment notes — CHAMPION 4151
Copper PlusClassification: Champion Copper Plus Small Engine
Resistor TypeOE-Recommended Gap: 0.025"
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO 41804
🇺🇸 US 🇨🇦 CA
ProfessionalDouble Platinum
Fitment notes — ACDELCO 41804
ProfessionalDouble PlatinumPre-Set Gap: 0.035"
3/4 IN Reach SOE-Recommended Gap: 0.025 IN
View on
Amazon
CHAMPION 7415
🇺🇸 US
Double Platinum PowerPre-Set Gap: 0.032"
Fitment notes — CHAMPION 7415
Double Platinum PowerPre-Set Gap: 0.032"
OE-Recommended Gap: 0.025"Resistor Plug
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
CHAMPION 9804
🇺🇸 US
IridiumPre-Set Gap: 0.03"
Fitment notes — CHAMPION 9804
IridiumPre-Set Gap: 0.03"
OE-Recommended Gap: 0.025"
View on
Amazon
SKP SP1041
🇺🇸 US
Tapered Ground Electrode with Platinum Chip
Fitment notes — SKP SP1041
Tapered Ground Electrode with Platinum Chip
3/4 ReachGap: .025
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO 4
🇺🇸 US 🇨🇦 CA
ProfessionalRapidfire
Fitment notes — ACDELCO 4
ProfessionalRapidfirePre-Set Gap: 0.041"
OE-Recommended Gap: 0.025" (IN)3/4 (IN) Reach
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1968 Amphicar 770

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 1.1L 70cid L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Ignition Coil .

Frequently Asked Questions

How many ignition parts fit the 1968 Amphicar 770?

Our catalog currently lists 17 ignition parts for the 1968 Amphicar 770 across 2 subcategories and 7 brands, covering the 1.1L 70cid L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1968 Amphicar 770?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1968 Amphicar 770?

Notes on this page include pre-set gaps of 0.025", 0.030", 0.032", 0.035" and 0.041". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1968 Amphicar 770 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1968 Amphicar 770?

Every part on this page is matched to the 1.1L 70cid L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1968 Amphicar 770

Ignition Parts for Other Amphicar 770 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.