This page lists 31 ignition parts for the 1960 Aston Martin DB4, across 4 part types, covering both the 3.7L L6 and the 4.0L L6. Every part shows its brand, manufacturer part number and fitment notes.
On the 1960 Aston Martin DB4, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Most of the listed parts are Spark Plug (15 parts), Ignition Coil (12 parts) and Ignition Conversion Kit (2 parts). The other 1 part type covers the remaining 2 parts.
The 1960 Aston Martin DB4 was sold with both the 3.7L L6 and the 4.0L L6. 30 parts fit every engine; the other 1 is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 1960 Aston Martin DB4 ignition parts are NGK (7 parts), CHAMPION (5 parts) and STANDARD MOTOR PRODUCTS (4 parts), plus 7 more brands. Quality grades include Copper / Nickel, Standard Replacement and Economy.
6 parts on this 1960 Aston Martin DB4 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including ACDELCO U505 (Ignition Coil) and NGK 4008 (Spark Plug). Click any part number to see every vehicle that part fits.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP Fits: all 1960 DB4 engines | UC15F | 🇺🇸 US | with 12 Volt Systemwithout External Resistor | View on Amazon |
| FVP Fits: all 1960 DB4 engines | UC12F | 🇺🇸 US | with 12 Volt Systemwith External Resistor | View on Amazon |
| SKP Fits: all 1960 DB4 engines | SKUC12 | 🇺🇸 US | with 12 Volt Systemfor with External Resistor. | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 1960 DB4 engines | UC15T | 🇺🇸 US | T-Series | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 1960 DB4 engines | UC12T | 🇺🇸 US | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: all 1960 DB4 engines | U505 | 🇺🇸 US 🇨🇦 CA | Professional | View on Amazon |
| NGK Popular Fits: all 1960 DB4 engines | 49030 | 🇺🇸 US | 12 voltwith External Resistor | View on Amazon |
| WELLS Popular Fits: all 1960 DB4 engines | 5C1026 | 🇺🇸 US | Requires External Resistor: YES | View on Amazon |
| NGK Fits: all 1960 DB4 engines | 48863 | 🇺🇸 US | 12 VoltInternal Resistor Coil | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 1960 DB4 engines | UC15 | 🇺🇸 US | with 12 Volt Systemwithout External Resistor | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 1960 DB4 engines | UC12 | 🇺🇸 US | with 12 Volt Systemwith External Resistor | View on Amazon |
| WELLS Fits: all 1960 DB4 engines | 5C1019 | 🇺🇸 US | Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
12 Ignition Coil parts are listed for the 1960 Aston Martin DB4, from STANDARD MOTOR PRODUCTS, FVP, NGK and 3 other brands. ACDELCO U505 carries the "Popular" badge. All of them fit every engine offered in the 1960 DB4.
In the Economy grade, FVP, STANDARD MOTOR PRODUCTS and SKP supply 5 parts: the catalog's value-priced group. A representative part number is FVP UC15F.
The Standard Replacement section lists 7 options from NGK, WELLS, STANDARD MOTOR PRODUCTS and 1 other brand — built to original-equipment specification. ACDELCO U505 is listed in this group.
Ignition Conversion Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 3.7L L6 | 1A4155 | 🇺🇸 US | with Lucas Distributor # DMBZ6A12 Volt | View on Amazon |
| WELLS Fits: all 1960 DB4 engines | 1A4228 | 🇺🇸 US | with Lucas Distributor # DMBZ6A12 Volt | View on Amazon |
This table covers the Ignition Conversion kits.
2 Ignition Conversion Kit parts for the 1960 Aston Martin DB4 come from WELLS. 1 part fits every engine; the other 1 is engine-specific.
Listed part numbers: WELLS 1A4155 and WELLS 1A4228.
Spark Plug
Summary: Notes include pre-set gaps of 0.024", 0.025", 0.030", 0.032", 0.035", 0.036", 0.040" and 0.044". Both engines share the same gaps. Replacement brands in this table include NGK, CHAMPION and ACDELCO.
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK Popular Fits: all 1960 DB4 engines | 4008 | 🇺🇸 US | StandardPre-Set Gap: 0.032" | View on Amazon |
| ACDELCO Fits: all 1960 DB4 engines | R43XLS | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| CHAMPION Fits: all 1960 DB4 engines | 415 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.032" | View on Amazon |
| CHAMPION Fits: all 1960 DB4 engines | 300 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.032" | View on Amazon |
| CHAMPION Fits: all 1960 DB4 engines | 4151 | 🇺🇸 US | Copper PlusClassification: Champion Copper Plus Small Engine | View on Amazon |
| MOTORCRAFT Fits: all 1960 DB4 engines | SP436AX | 🇺🇸 US | Copper | View on Amazon |
| NGK Fits: all 1960 DB4 engines | 6427 | 🇺🇸 US | V-PowerPre-Set Gap: 0.032" | View on Amazon |
| NGK Fits: all 1960 DB4 engines | 7131 | 🇺🇸 US | StandardPre-Set Gap: 0.036" | View on Amazon |
Double Platinum (lasts up to 3x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: all 1960 DB4 engines | 41804 | 🇺🇸 US 🇨🇦 CA | ProfessionalDouble Platinum | View on Amazon |
| AUTOLITE Fits: all 1960 DB4 engines | APP64 | 🇺🇸 US | Double PlatinumHex Size: 13/16 In | View on Amazon |
| CHAMPION Fits: all 1960 DB4 engines | 7415 | 🇺🇸 US | Double Platinum PowerPre-Set Gap: 0.032" | View on Amazon |
Iridium (lasts up to 4x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK Popular Fits: all 1960 DB4 engines | 6637 | 🇺🇸 US | Iridium IXPre-Set Gap: 0.032" | View on Amazon |
| CHAMPION Fits: all 1960 DB4 engines | 9804 | 🇺🇸 US | IridiumPre-Set Gap: 0.03" | View on Amazon |
| SKP Fits: all 1960 DB4 engines | SP1042 | 🇺🇸 US | Tapered Ground Electrode with Platinum Chip | View on Amazon |
Platinum (lasts up to 2x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK Popular Fits: all 1960 DB4 engines | 7084 | 🇺🇸 US | G-PowerPre-Set Gap: 0.040" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
15 Spark Plug parts for the 1960 Aston Martin DB4 come from 6 brands — NGK, CHAMPION, ACDELCO and 3 other brands. The "Popular" part is NGK 4008. Every part fits both the 3.7L L6 and the 4.0L L6.
The Copper / Nickel section lists 8 options from NGK, CHAMPION, ACDELCO and 1 other brand — grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. NGK 4008 is listed in this group.
The Double Platinum (lasts up to 3x longer than Copper / Nickel) section lists 3 options from ACDELCO, AUTOLITE and CHAMPION — grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. ACDELCO 41804 is listed in this group.
In the Iridium (lasts up to 4x longer than Copper / Nickel) grade, NGK, CHAMPION and SKP supply 3 parts: grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is NGK 6637.
The Platinum (lasts up to 2x longer than Copper / Nickel) section lists 1 option from NGK — grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. NGK 7084 is listed in this group.
Spark Plug / Ignition Coil Boot
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| METRO Fits: all 1960 DB4 engines | RP1Z | 🇺🇸 US 🇨🇦 CA | Sold Individually | View on Amazon |
| METRO Fits: all 1960 DB4 engines | RP1X | 🇺🇸 US 🇨🇦 CA | Sold Individually | View on Amazon |
This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it.
METRO supplies both parts for the 1960 Aston Martin DB4. All of them fit every engine offered in the 1960 DB4.
This group includes METRO RP1Z and METRO RP1X.
Buying Ignition Parts for a 1960 Aston Martin DB4
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Some ignition parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Ignition Coil .
Frequently Asked Questions
How many ignition parts fit the 1960 Aston Martin DB4?
Our catalog currently lists 31 ignition parts for the 1960 Aston Martin DB4 across 4 subcategories and 10 brands, covering both the 3.7L L6 and the 4.0L L6. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 1960 Aston Martin DB4 engines?
Some do. 30 parts fit every engine; the other 1 is engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 1960 Aston Martin DB4?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1960 Aston Martin DB4?
Notes on this page include pre-set gaps of 0.024", 0.025", 0.030", 0.032", 0.035", 0.036", 0.040" and 0.044". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1960 Aston Martin DB4 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1960 Aston Martin DB4?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1960 Aston Martin DB4
Ignition Parts for Other Aston Martin DB4 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.