1964 Aston Martin DB5 Ignition Parts

Engine:
4.0L L6

29 Ignition parts are listed for the 1964 Aston Martin DB5, in 4 part types, covering the 4.0L L6 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1964 Aston Martin DB5, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Most of the listed parts are Spark Plug (15 parts), Ignition Coil (11 parts) and Ignition Conversion Kit (2 parts). The other 1 part type covers the remaining 1 part.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
SKP Popular SKUC12
🇺🇸 US
with 12 Volt Systemfor with External Resistor.
View on
Amazon
FVP UC15F
🇺🇸 US
with 12 Volt Systemwithout External Resistor
View on
Amazon
FVP UC12F
🇺🇸 US
with 12 Volt Systemwith External Resistor
View on
Amazon
STANDARD MOTOR PRODUCTS UC15T
🇺🇸 US
T-Series
Fitment notes — STANDARD MOTOR PRODUCTS UC15T
T-Series
with 12 Volt Systemwithout External Resistor
View on
Amazon
STANDARD MOTOR PRODUCTS UC12T
🇺🇸 US
T-Series
Fitment notes — STANDARD MOTOR PRODUCTS UC12T
T-Series
with 12 Volt Systemwith External Resistor
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ACDELCO Popular U505
🇺🇸 US 🇨🇦 CA
Professional
Fitment notes — ACDELCO U505
Professional
with External Resistor12 Volt
View on
Amazon
WELLS Popular 5C1026
🇺🇸 US
Requires External Resistor: YES
Fitment notes — WELLS 5C1026
Requires External Resistor: YES
12 voltwith External Resistor
View on
Amazon
NGK 48863
🇺🇸 US
12 VoltInternal Resistor Coil
Fitment notes — NGK 48863
12 VoltInternal Resistor CoilConnections May be Eyelet or Spade
View on
Amazon
STANDARD MOTOR PRODUCTS UC15
🇺🇸 US
with 12 Volt Systemwithout External Resistor
View on
Amazon
STANDARD MOTOR PRODUCTS UC12
🇺🇸 US
with 12 Volt Systemwith External Resistor
View on
Amazon
WELLS 5C1019
🇺🇸 US
Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil
Fitment notes — WELLS 5C1019
Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil
12 VoltInternal Resistor Coil
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Ignition Conversion Kit

Brand Part Number Markets Notes Buy
WELLS 1A4155
🇺🇸 US
with Lucas Distributor # DMBZ6A12 Volt
Fitment notes — WELLS 1A4155
with Lucas Distributor # DMBZ6A12 VoltNegative Ground
View on
Amazon
WELLS 1A4228
🇺🇸 US
with Lucas Distributor # DMBZ6A12 Volt
Fitment notes — WELLS 1A4228
with Lucas Distributor # DMBZ6A12 Voltwith Positive Ground
View on
Amazon

This table covers the Ignition Conversion kits.

Spark Plug

Summary: Notes include pre-set gaps of 0.024", 0.025", 0.030", 0.032", 0.035", 0.036", 0.040" and 0.044". Replacement brands in this table include NGK, CHAMPION and ACDELCO.

Copper / Nickel

Brand Part Number Markets Notes Buy
NGK Popular 4008
🇺🇸 US
StandardPre-Set Gap: 0.032"
Fitment notes — NGK 4008
StandardPre-Set Gap: 0.032"
OE-Recommended Gap: 0.025 IN
View on
Amazon
ACDELCO R43XLS
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R43XLS
ProfessionalConventionalPre-Set Gap: 0.030"
Original Equipment-Recommended Gap: .025
View on
Amazon
CHAMPION 415
🇺🇸 US
Copper PlusPre-Set Gap: 0.032"
Fitment notes — CHAMPION 415
Copper PlusPre-Set Gap: 0.032"
Resistor TypeOE-Recommended Gap: 0.024"
View on
Amazon
CHAMPION 300
🇺🇸 US
Copper PlusPre-Set Gap: 0.032"
Fitment notes — CHAMPION 300
Copper PlusPre-Set Gap: 0.032"
Non-Resistor TypeOE TypeOE-Recommended Gap: 0.024"
View on
Amazon
CHAMPION 4151
🇺🇸 US
Copper PlusClassification: Champion Copper Plus Small Engine
Fitment notes — CHAMPION 4151
Copper PlusClassification: Champion Copper Plus Small Engine
Resistor TypeOE-Recommended Gap: 0.024"
View on
Amazon
MOTORCRAFT SP436AX
🇺🇸 US
Copper
Fitment notes — MOTORCRAFT SP436AX
Copper
OE Style.025"/0.6mm
View on
Amazon
NGK 6427
🇺🇸 US
V-PowerPre-Set Gap: 0.032"
Fitment notes — NGK 6427
V-PowerPre-Set Gap: 0.032"
OE-Recommended Gap: 0.025 IN
View on
Amazon
NGK 7131
🇺🇸 US
StandardPre-Set Gap: 0.036"
Fitment notes — NGK 7131
StandardPre-Set Gap: 0.036"
OE-Recommended Gap: 0.025 IN
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO 41804
🇺🇸 US 🇨🇦 CA
ProfessionalDouble Platinum
Fitment notes — ACDELCO 41804
ProfessionalDouble PlatinumPre-Set Gap: 0.035"
OE-Recommended Gap: 0.025"
View on
Amazon
AUTOLITE APP64
🇺🇸 US
Double PlatinumHex Size: 13/16 In
Fitment notes — AUTOLITE APP64
Double PlatinumHex Size: 13/16 InPre-Set Gap: 0.044"
Gap .025 (In) 0.6 (mm)
View on
Amazon
CHAMPION 7415
🇺🇸 US
Double Platinum PowerPre-Set Gap: 0.032"
Fitment notes — CHAMPION 7415
Double Platinum PowerPre-Set Gap: 0.032"
OE-Recommended Gap: 0.024"Resistor Plug
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
NGK Popular 6637
🇺🇸 US
Iridium IXPre-Set Gap: 0.032"
Fitment notes — NGK 6637
Iridium IXPre-Set Gap: 0.032"
OE-Recommended Gap: 0.025 IN
View on
Amazon
CHAMPION 9804
🇺🇸 US
IridiumPre-Set Gap: 0.03"
Fitment notes — CHAMPION 9804
IridiumPre-Set Gap: 0.03"
OE-Recommended Gap: 0.024"
View on
Amazon
SKP SP1042
🇺🇸 US
Tapered Ground Electrode with Platinum Chip
Fitment notes — SKP SP1042
Tapered Ground Electrode with Platinum Chip
Gap: .025
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
NGK Popular 7084
🇺🇸 US
G-PowerPre-Set Gap: 0.040"
Fitment notes — NGK 7084
G-PowerPre-Set Gap: 0.040"
OE-Recommended Gap: 0.025 IN
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Spark Plug / Ignition Coil Boot

Brand Part Number Markets Notes Buy
METRO RP1X
🇺🇸 US 🇨🇦 CA
Sold Individually
Fitment notes — METRO RP1X
Sold Individually
Base Model, VantageSpark Plug BootCoupe
View on
Amazon

This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it.

Buying Ignition Parts for a 1964 Aston Martin DB5

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 4.0L L6 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Ignition Coil .

Frequently Asked Questions

How many ignition parts fit the 1964 Aston Martin DB5?

Our catalog currently lists 29 ignition parts for the 1964 Aston Martin DB5 across 4 subcategories and 10 brands, covering the 4.0L L6 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1964 Aston Martin DB5?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1964 Aston Martin DB5?

Notes on this page include pre-set gaps of 0.024", 0.025", 0.030", 0.032", 0.035", 0.036", 0.040" and 0.044". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1964 Aston Martin DB5 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1964 Aston Martin DB5?

Every part on this page is matched to the 4.0L L6 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1964 Aston Martin DB5

Ignition Parts for Other Aston Martin DB5 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.