34 Ignition parts are listed for the 1969 Aston Martin DB6, in 5 part types, covering the 4.0L L6 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The ignition system on the 1969 Aston Martin DB6 delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. The largest groups are Spark Plug (15 parts), Ignition Coil (14 parts) and Distributor Rotor (2 parts). The other 2 part types cover the remaining 3 parts.
The 1969 Aston Martin DB6 came with a single engine, the 4.0L L6, and every part is verified against it.
12 brands supply ignition parts for the 1969 Aston Martin DB6, led by NGK (6 parts), STANDARD MOTOR PRODUCTS (5 parts) and WELLS (5 parts), plus 9 more brands. Quality grades include Copper / Nickel, Economy and Standard Replacement.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1969 Aston Martin DB6. 6 parts have it, including SKP SKUC12 (Ignition Coil) and NGK 4008 (Spark Plug). Each part number opens a page with every vehicle that part fits.
Distributor Rotor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | LU302 | 🇺🇸 US | View on Amazon | |
| WELLS | 4R1188 | 🇺🇸 US | View on Amazon |
This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.
2 Distributor Rotor parts are listed for the 1969 Aston Martin DB6, from STANDARD MOTOR PRODUCTS and WELLS.
Part numbers include STANDARD MOTOR PRODUCTS LU302 and WELLS 4R1188.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular | SKUC12 | 🇺🇸 US | 12V with External Resistor | View on Amazon |
| FVP | UC15F | 🇺🇸 US | 12 VOLT | View on Amazon |
| FVP | UC12F | 🇺🇸 US | 12V with External Resistor | View on Amazon |
| HOLSTEIN | 2IGC0058 | 🇺🇸 US | with 12 Volt System | View on Amazon |
| HOLSTEIN | 2IGC0056 | 🇺🇸 US | with 12 Volt System with External Resistor | View on Amazon |
| STANDARD MOTOR PRODUCTS | UC15T | 🇺🇸 US | T-Series | View on Amazon |
| STANDARD MOTOR PRODUCTS | UC12T | 🇺🇸 US | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular | U505 | 🇺🇸 US 🇨🇦 CA | Professional | View on Amazon |
| WELLS Popular | 5C1026 | 🇺🇸 US | Requires External Resistor: YES | View on Amazon |
| NGK | 48863 | 🇺🇸 US | 12 VoltInternal Resistor Coil | View on Amazon |
| STANDARD MOTOR PRODUCTS | UC15 | 🇺🇸 US | 12 VOLT | View on Amazon |
| STANDARD MOTOR PRODUCTS | UC12 | 🇺🇸 US | 12V with External Resistor | View on Amazon |
| WALKER PRODUCTS | 9201041 | 🇺🇸 US | Single Coil | View on Amazon |
| WELLS | 5C1019 | 🇺🇸 US | Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
14 Ignition Coil parts for the 1969 Aston Martin DB6 come from 8 brands — STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 5 other brands. The "Popular" part is SKP SKUC12.
The Economy section lists 7 options from FVP, HOLSTEIN, STANDARD MOTOR PRODUCTS and 1 other brand — the catalog's value-priced group. SKP SKUC12 is listed in this group.
In the Standard Replacement grade, WELLS, STANDARD MOTOR PRODUCTS, ACDELCO and 2 other brands supply 7 parts: built to original-equipment specification. A representative part number is ACDELCO U505.
Ignition Conversion Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS | 1A4154 | 🇺🇸 US | with Lucas Distributor # 25D612 Volt | View on Amazon |
| WELLS | 1A4227 | 🇺🇸 US | with Lucas Distributor # 25D612 Volt | View on Amazon |
This table covers the Ignition Conversion kits.
WELLS supplies both parts for the 1969 Aston Martin DB6.
Part numbers include WELLS 1A4154 and WELLS 1A4227.
Spark Plug
Summary: Notes include pre-set gaps of 0.024", 0.025", 0.030", 0.032", 0.035", 0.036", 0.040" and 0.044". Replacement brands in this table include NGK, CHAMPION and ACDELCO.
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK Popular | 4008 | 🇺🇸 US | StandardPre-Set Gap: 0.032" | View on Amazon |
| ACDELCO | R43XLS | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| CHAMPION | 415 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.032" | View on Amazon |
| CHAMPION | 300 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.032" | View on Amazon |
| CHAMPION | 4151 | 🇺🇸 US | Copper PlusClassification: Champion Copper Plus Small Engine | View on Amazon |
| MOTORCRAFT | SP436AX | 🇺🇸 US | Copper | View on Amazon |
| NGK | 6427 | 🇺🇸 US | V-PowerPre-Set Gap: 0.032" | View on Amazon |
| NGK | 7131 | 🇺🇸 US | StandardPre-Set Gap: 0.036" | View on Amazon |
Double Platinum (lasts up to 3x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO | 41804 | 🇺🇸 US 🇨🇦 CA | ProfessionalDouble Platinum | View on Amazon |
| AUTOLITE | APP64 | 🇺🇸 US | Double PlatinumHex Size: 13/16 In | View on Amazon |
| CHAMPION | 7415 | 🇺🇸 US | Double Platinum PowerPre-Set Gap: 0.032" | View on Amazon |
Iridium (lasts up to 4x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK Popular | 6637 | 🇺🇸 US | Iridium IXPre-Set Gap: 0.032" | View on Amazon |
| CHAMPION | 9804 | 🇺🇸 US | IridiumPre-Set Gap: 0.03" | View on Amazon |
| SKP | SP1042 | 🇺🇸 US | Tapered Ground Electrode with Platinum Chip | View on Amazon |
Platinum (lasts up to 2x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK Popular | 7084 | 🇺🇸 US | G-PowerPre-Set Gap: 0.040" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
15 Spark Plug parts are listed for the 1969 Aston Martin DB6, from NGK, CHAMPION, ACDELCO and 3 other brands. NGK 4008 carries the "Popular" badge.
In the Copper / Nickel grade, NGK, CHAMPION, ACDELCO and 1 other brand supply 8 parts: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is NGK 4008.
In the Double Platinum (lasts up to 3x longer than Copper / Nickel) grade, ACDELCO, AUTOLITE and CHAMPION supply 3 parts: grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 41804.
The Iridium (lasts up to 4x longer than Copper / Nickel) section lists 3 options from NGK, CHAMPION and SKP — grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. NGK 6637 is listed in this group.
In the Platinum (lasts up to 2x longer than Copper / Nickel) grade, NGK supplies 1 part: grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is NGK 7084.
Spark Plug / Ignition Coil Boot
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| METRO | RP1X | 🇺🇸 US 🇨🇦 CA | Sold Individually | View on Amazon |
This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it.
This group shows a single part: METRO RP1X.
Buying Ignition Parts for a 1969 Aston Martin DB6
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 4.0L L6 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Ignition Coil .
Frequently Asked Questions
How many ignition parts fit the 1969 Aston Martin DB6?
Our catalog currently lists 34 ignition parts for the 1969 Aston Martin DB6 across 5 subcategories and 12 brands, covering the 4.0L L6 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1969 Aston Martin DB6?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1969 Aston Martin DB6?
Notes on this page include pre-set gaps of 0.024", 0.025", 0.030", 0.032", 0.035", 0.036", 0.040" and 0.044". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1969 Aston Martin DB6 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1969 Aston Martin DB6?
Every part on this page is matched to the 4.0L L6 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1969 Aston Martin DB6
Ignition Parts for Other Aston Martin DB6 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.