4 Engine parts are listed for the 1971 Aston Martin DBS, in 2 part types, covering both the 4.0L L6 and the 5.3L V8. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1971 Aston Martin DBS, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. All 4 listed parts are Oil Filter (3 parts) and Camshaft Plug (1 part).
The 1971 Aston Martin DBS was sold with both the 4.0L L6 and the 5.3L V8. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 1971 Aston Martin DBS engine parts are METRO (1 part), PUROLATOR (1 part) and MANN (1 part), plus 1 more brand. Quality grades include Standard Replacement and Economy.
Each part number listed for the 1971 Aston Martin DBS opens a page with every vehicle that part fits.
Camshaft Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| METRO Fits: 5.3L V8 | RP8C | 🇺🇸 US 🇨🇦 CA | Sold Individually | View on Amazon |
This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
This group shows a single part: METRO RP8C.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PUROLATOR Fits: 5.3L V8 | L20099 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MANN Fits: 5.3L V8 | H1038 | 🇺🇸 US | Height: 4.72 In | View on Amazon |
| WIX Fits: 5.3L V8 | 51099 | 🇺🇸 US | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
3 Oil Filter parts are listed for the 1971 Aston Martin DBS, from PUROLATOR, MANN and WIX.
In the Economy grade, PUROLATOR supplies 1 part: the catalog's value-priced group. A representative part number is PUROLATOR L20099.
The Standard Replacement section lists 2 options from MANN and WIX — built to original-equipment specification. MANN H1038 is listed in this group.
Part numbers include PUROLATOR L20099, MANN H1038 and WIX 51099.
Buying Engine Parts for a 1971 Aston Martin DBS
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Filter and Camshaft Plug .
Frequently Asked Questions
How many engine parts fit the 1971 Aston Martin DBS?
Our catalog currently lists 4 engine parts for the 1971 Aston Martin DBS across 2 subcategories and 4 brands, covering both the 4.0L L6 and the 5.3L V8. Each part is matched to the engine(s) it fits.
Do engine parts differ between 1971 Aston Martin DBS engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 1971 Aston Martin DBS?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1971 Aston Martin DBS was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1971 Aston Martin DBS?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1971 Aston Martin DBS
Engine Parts for Other Aston Martin DBS Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.