1979 Aston Martin V-8 Engine Parts

Engine:
5.3L V8

The 1979 Aston Martin V-8 has 11 engine parts with verified fitment on this page — 2 part types and 10 brands, covering the 5.3L V8 engine. Each part includes a manufacturer part number and application notes.

On the 1979 Aston Martin V-8, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. All 11 listed parts are Oil Filter (10 parts) and Camshaft Plug (1 part).

Camshaft Plug

Brand Part Number Markets Notes Buy
METRO RP8D
🇺🇸 US 🇨🇦 CA
Sold Individually
Fitment notes — METRO RP8D
Sold Individually
Base Model, Vantage, VolanteCam Cover PlugFor models with 8-cylinder engines1-1/4" long X 3/8" thick
View on
Amazon

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
FVP R1515
🇺🇸 US
Spin-On Filter
View on
Amazon
PRO-TEC PXL51515
🇺🇸 US
Height: 5.197 InSpin-On Filter
View on
Amazon
PUROLATOR PBL30001
🇺🇸 US
Bypass Relief Valve Setting: 8-16 PSIClass: D
Fitment notes — PUROLATOR PBL30001
Bypass Relief Valve Setting: 8-16 PSIClass: D
with 4 Weber Carburetors.
View on
Amazon
VARIOUS MFR PG1A
🇺🇸 US
Spin-On
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
MOBIL M1301A
🇺🇸 US
Extended PerformanceBypass Relief Valve Setting: 8-16
Fitment notes — MOBIL M1301A
Extended PerformanceBypass Relief Valve Setting: 8-16
with 4 Weber Carburetors.
View on
Amazon
WIX 51515XP
🇺🇸 US
XP Extreme DutyBest for Synthetic Motor Oils
Fitment notes — WIX 51515XP
XP Extreme DutyBest for Synthetic Motor OilsSpin-On Filter
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MOTORCRAFT Popular FL1A
🇺🇸 US
with 4 Weber Carburetors.
View on
Amazon
WIX Popular 51515
🇺🇸 US
Bypass Relief Valve Setting: 8-11 PSIHeight: 5.197 In
Fitment notes — WIX 51515
Bypass Relief Valve Setting: 8-11 PSIHeight: 5.197 InSpin-On Filter
View on
Amazon
BOSCH 3500
🇺🇸 US
Premium Oil Filter
View on
Amazon
HASTINGS / BALDWIN B2
🇺🇸 US
Spin-On
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Buying Engine Parts for a 1979 Aston Martin V-8

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 5.3L V8 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Camshaft Plug .

Frequently Asked Questions

How many engine parts fit the 1979 Aston Martin V-8?

Our catalog currently lists 11 engine parts for the 1979 Aston Martin V-8 across 2 subcategories and 10 brands, covering the 5.3L V8 engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 1979 Aston Martin V-8?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1979 Aston Martin V-8 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1979 Aston Martin V-8?

Every part on this page is matched to the 5.3L V8 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1979 Aston Martin V-8

Engine Parts for Other Aston Martin V-8 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.