1997 Aston Martin DB7 Automatic Transmission Parts

This table covers the Actuator Feed Limit valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Actuator Feed Limit Valve parts for the 1997 Aston Martin DB7 come from TRANSGO.

This group includes TRANSGO 48ACTVL6 and TRANSGO 48ACTTL.

This table covers the apply bands inside the automatic transmission. Read more

One part is listed for the 1997 Aston Martin DB7 — BORG-WARNER 38014BW.

This table covers the Boost valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 1997 Aston Martin DB7 — SONNAX 4L80ELB1.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Bushing parts for the 1997 Aston Martin DB7 come from 2 brands — DURA-BOND and PIONEER.

This group includes DURA-BOND GMT42 and PIONEER 755189.

This table covers the Bushing kits. Read more

3 Bushing Kit parts for the 1997 Aston Martin DB7 come from DURA-BOND.

Listed part numbers: DURA-BOND TK4A, DURA-BOND TK4AEK and DURA-BOND TK4AHP.

This table covers the Case bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Case Bushing parts for the 1997 Aston Martin DB7 come from 2 brands — DURA-BOND and SONNAX.

This group includes DURA-BOND GMT44 and SONNAX 34006SPB.

This table covers the Center Support bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND 03118.

This table covers the Clutch hubs. Read more

This group shows a single part: SONNAX 3432202K.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

2 Clutch Plate Pack parts for the 1997 Aston Martin DB7 come from PIONEER.

Listed part numbers: PIONEER 766079 and PIONEER 766533.

This table covers the related components grouped with this assembly. Read more

8 Components parts for the 1997 Aston Martin DB7 come from SONNAX. The "Popular" part is SONNAX 3499801K.

Listed part numbers: SONNAX 3499801K, SONNAX 3420047K and SONNAX 3471601, plus the other parts above.

This table covers the Extension Housing bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Extension Housing Bearing parts for the 1997 Aston Martin DB7 come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS RB6009 is listed in this group.

In the Standard Replacement grade, BCA and NATIONAL supply 2 parts: built to original-equipment specification. A representative part number is BCA NB109.

Listed part numbers: WJB / INMOTION PARTS RB6009, BCA NB109 and NATIONAL 109.

This table covers the Extension Housing bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND 34005F.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Extension Housing Seal parts are listed for the 1997 Aston Martin DB7, from NATIONAL, TIMKEN, WJB / INMOTION PARTS and 4 other brands. NATIONAL 9449 carries the "Popular" badge.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

6 Filter parts for the 1997 Aston Martin DB7 come from 3 brands — ATP, HASTINGS / BALDWIN and PIONEER. The "Popular" part is ATP TF174.

The Economy section: 1 option from ATP. ATP TF174 is listed in this group.

Standard Replacement: 5 parts, from ATP, HASTINGS / BALDWIN and PIONEER. A representative part number is ATP B174.

This group includes ATP TF174, ATP B174 and ATP B395 and the remaining parts above.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Fluid Pan Gasket parts for the 1997 Aston Martin DB7 come from 5 brands — ATP, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is ATP JG142.

Listed part numbers: ATP JG142, FEL-PRO TOS18698 and MAHLE / CLEVITE W39379, plus the other parts above.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

6 Fluid Pump Bushing parts for the 1997 Aston Martin DB7 come from 2 brands — DURA-BOND and PIONEER. The "Popular" part is DURA-BOND 34001CSTG.

Listed part numbers: DURA-BOND 34001CSTG, DURA-BOND 34001CT and DURA-BOND 34001C, plus the other parts above.

This table covers the gaskets that seal the Fluid Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Fluid Pump Gasket parts are listed for the 1997 Aston Martin DB7, from ATP and PIONEER.

Part numbers include ATP SG47 and PIONEER 749361.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

2 Fluid Pump Repair Sleeve parts are listed for the 1997 Aston Martin DB7, from NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99199 and WJB / INMOTION PARTS WS99199.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts are listed for the 1997 Aston Martin DB7, from BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS4598, NATIONAL 4598 and WJB / INMOTION PARTS WS4598.

This table covers the governors and modulators that control transmission shift pressure. Read more

This group shows a single part: TRANSGO 48MOD.

This table covers the Main shafts. Read more

One part is listed for the 1997 Aston Martin DB7 — SONNAX 3467205.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts are listed for the 1997 Aston Martin DB7, from NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 8792S and WJB / INMOTION PARTS WS8792S.

This table covers the Output Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1997 Aston Martin DB7 — DURA-BOND 8624988.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: TIMKEN 4934.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Pressure Control (EPC) Solenoid parts for the 1997 Aston Martin DB7 come from 2 brands — PA CARGO and ROSTRA.

Listed part numbers: PA CARGO 34605A and ROSTRA 520340.

This table covers the Pressure Switch manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

One part is listed for the 1997 Aston Martin DB7 — ROSTRA 501000.

This table covers the rebuild kits for this assembly. Read more

9 Rebuild Kit parts are listed for the 1997 Aston Martin DB7, from PIONEER, ATP and TRANSTEC. PIONEER 753058 carries the "Popular" badge.

In the Deluxe Kit (Master Kit + Filter, Band & Common Bushings) grade, PIONEER supplies 2 parts: grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. A representative part number is PIONEER 753058.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 4 options from ATP and PIONEER — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. ATP JM28 is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, TRANSTEC and PIONEER supply 3 parts: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is TRANSTEC 81000401.

Part numbers include PIONEER 753058, PIONEER 753060 and ATP JM28, among others listed above.

This table covers the sealing rings inside this assembly. Read more

This group shows a single part: TRANSGO 4L80EHTRK.

This table covers the Shift Improvement kits. Read more

3 Shift Improvement Kit parts for the 1997 Aston Martin DB7 come from TRANSGO.

In the Daily Driver grade, TRANSGO supplies 1 part: grouped for everyday commuting duty. A representative part number is TRANSGO SK4L80E.

The High Performance section lists 2 options from TRANSGO — engineered beyond original-equipment specification. TRANSGO 4L80EHD2 is listed in this group.

Listed part numbers: TRANSGO SK4L80E, TRANSGO 4L80EHD2 and TRANSGO 4L80E3.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Shift Shaft Seal parts are listed for the 1997 Aston Martin DB7, from ACDELCO, SCHAEFFLER and TIMKEN.

Part numbers include ACDELCO 8792S and SCHAEFFLER SS2114, among others listed above.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Shift Solenoid parts are listed for the 1997 Aston Martin DB7, from ATP and ROSTRA.

Listed part numbers: ATP JE53 and ROSTRA 520356.

This table covers the Stator Support Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

3 Stator Support Shaft Bushing parts for the 1997 Aston Martin DB7 come from DURA-BOND.

This group includes DURA-BOND GMT41, DURA-BOND 8661614 and DURA-BOND GMT41A.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies both parts for the 1997 Aston Martin DB7.

This group includes DURA-BOND 03131BRS and DURA-BOND 03131.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

This group shows a single part: TC REMANUFACTURING B82.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Torque Converter Clutch Solenoid parts for the 1997 Aston Martin DB7 come from 2 brands — PIONEER and ROSTRA.

Part numbers include PIONEER 771021 and ROSTRA 520241.

This table covers the Torque Converter Clutch valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

TRANSGO supplies both parts for the 1997 Aston Martin DB7.

This group includes TRANSGO 4L80ETCC and TRANSGO 48CCV.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

2 Torque Converter Repair Sleeve parts are listed for the 1997 Aston Martin DB7, from SCHAEFFLER and TIMKEN.

Part numbers include SCHAEFFLER SR3511 and TIMKEN KWK99199.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Torque Converter Shaft Seal parts are listed for the 1997 Aston Martin DB7, from SCHAEFFLER and TIMKEN.

Listed part numbers: SCHAEFFLER SS3040 and TIMKEN 4598.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

16 Transmission Fluid parts for the 1997 Aston Martin DB7 come from 5 brands — VALVOLINE, LIQUI MOLY, PENTOSIN and 2 other brands. The "Popular" part is VALVOLINE 798153.

The Dexron section lists 3 options from VALVOLINE — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. VALVOLINE 798153 is listed in this group.

The Multi-Vehicle section lists 6 options from VALVOLINE and LIQUI MOLY — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. VALVOLINE VV3246 is listed in this group.

The Type III (H) section lists 2 options from ACDELCO — grouped under the catalog's "Type III (H)" designation — the notes column spells out what sets them apart. ACDELCO 109240 is listed in this group.

The Type T-4 (Type T-IV) section lists 2 options from IDEMITSU — grouped under the catalog's "Type T-4 (Type T-IV)" designation — the notes column spells out what sets them apart. IDEMITSU 30040093750 is listed in this group.

The ZF Fluid section lists 3 options from PENTOSIN — grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. PENTOSIN 1058106 is listed in this group.

This table covers the conditioners and additives used with this transmission fluid. Read more

8 Transmission Fluid Additive parts for the 1997 Aston Martin DB7 come from 2 brands — LUBEGARD and ATP. The "Popular" part is LUBEGARD 19610.

Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and ATP AT202, plus the other parts above.

This table covers the valve bodies that route hydraulic pressure inside the transmission. Read more

3 Valve Body parts for the 1997 Aston Martin DB7 come from 2 brands — SONNAX and PA CARGO.

Listed part numbers: PA CARGO GM4624, SONNAX GM028 and SONNAX GM033.

This table covers the gaskets that seal the Valve Body. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1997 Aston Martin DB7 — TRANSTEC 72401472.

This table covers the Valve Body Separator plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

One part is listed for the 1997 Aston Martin DB7 — TRANSGO 48PLT01.

This table covers the testers used to diagnose a valve body. Read more

This group shows a single part: SONNAX 34994VTP.