2001 Aston Martin DB7 Ignition Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

16 Ignition parts are listed for the 2001 Aston Martin DB7, in 1 part type, covering both the 3.2L L6 Supercharged and the 5.9L V12. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 2001 Aston Martin DB7, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Every listed part is a Spark Plug.

Spark Plug

Summary: Notes include pre-set gaps of 0.035", 0.040", 0.044", 0.045", 0.050", 0.052" and 0.054". Replacement brands in this table include CHAMPION, BOSCH and ACDELCO.

Copper / Nickel

Brand Part Number Markets Notes Buy
CHAMPION Popular Fits: 5.9L V12 401
🇺🇸 US 🇨🇦 CA
Copper PlusPre-Set Gap: 0.04"
Fitment notes — CHAMPION 401
Copper PlusPre-Set Gap: 0.04"
OE-Recommended Gap: 0.052"
View on
Amazon
ACDELCO Fits: 5.9L V12 41629
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO 41629
ProfessionalConventionalPre-Set Gap: 0.035"
Original Equipment-Recommended Gap: .050
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
BOSCH Popular Fits: 5.9L V12 8103
🇺🇸 US 🇨🇦 CA
OE Fine Wire Double PlatinumPre-Set Gap: 0.054"
Fitment notes — BOSCH 8103
OE Fine Wire Double PlatinumPre-Set Gap: 0.054"
Original Equipment is Platinum
View on
Amazon
ACDELCO Fits: 5.9L V12 41950
🇺🇸 US 🇨🇦 CA
GM Original EquipmentDouble Platinum
Fitment notes — ACDELCO 41950
GM Original EquipmentDouble PlatinumPre-Set Gap: 0.054"
OE-Recommended Gap: 0.050" (IN)
View on
Amazon
BOSCH Fits: 5.9L V12 HR7KPP33
🇺🇸 US 🇨🇦 CA
OE Fine Wire Double PlatinumPre-Set Gap: 0.040"
Fitment notes — BOSCH HR7KPP33
OE Fine Wire Double PlatinumPre-Set Gap: 0.040"
Double Platinum
View on
Amazon
CHAMPION Fits: 5.9L V12 7963
🇺🇸 US 🇨🇦 CA
Double Platinum PowerPre-Set Gap: 0.05"
Fitment notes — CHAMPION 7963
Double Platinum PowerPre-Set Gap: 0.05"
OE-Recommended Gap: 0.052"
View on
Amazon
MOTORCRAFT Fits: 5.9L V12 SP485
🇺🇸 US 🇨🇦 CA
Double Platinum
Fitment notes — MOTORCRAFT SP485
Double Platinum
OE Style.050"/1.3mm
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
AUTOLITE Fits: 5.9L V12 XP3924
🇺🇸 US 🇨🇦 CA
Iridium XP Spark Plug Dual Display PackPre-Set Gap: 0.044"
Fitment notes — AUTOLITE XP3924
Iridium XP Spark Plug Dual Display PackPre-Set Gap: 0.044"
Gap .050 (In) 1.3 (mm)
View on
Amazon
BOSCH Fits: 5.9L V12 9605
🇺🇸 US 🇨🇦 CA
OE Fine Wire Double IridiumPre-Set Gap: 0.054"
Fitment notes — BOSCH 9605
OE Fine Wire Double IridiumPre-Set Gap: 0.054"
Original Equipment is Platinum
View on
Amazon
CHAMPION Fits: 5.9L V12 9204
🇺🇸 US 🇨🇦 CA
IridiumPre-Set Gap: 0.045"
Fitment notes — CHAMPION 9204
IridiumPre-Set Gap: 0.045"
OE-Recommended Gap: 0.052"
View on
Amazon
SKP Fits: 5.9L V12 SP1013
🇺🇸 US 🇨🇦 CA
Iridium XP
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: 5.9L V12 6
🇺🇸 US 🇨🇦 CA
ProfessionalRapidfire
Fitment notes — ACDELCO 6
ProfessionalRapidfirePre-Set Gap: 0.045"
OE-Recommended Gap: 0.050" (IN)
View on
Amazon
CHAMPION Popular Fits: 5.9L V12 3408
🇺🇸 US 🇨🇦 CA
Platinum PowerPre-Set Gap: 0.044"
Fitment notes — CHAMPION 3408
Platinum PowerPre-Set Gap: 0.044"
OE-Recommended Gap: 0.052"
View on
Amazon
BOSCH Fits: 5.9L V12 6747
🇺🇸 US 🇨🇦 CA
OE Fine Wire PlatinumPre-Set Gap: 0.054"
Fitment notes — BOSCH 6747
OE Fine Wire PlatinumPre-Set Gap: 0.054"
Original Equipment is Platinum
View on
Amazon
MOTORCRAFT Fits: 5.9L V12 SP497X
🇺🇸 US 🇨🇦 CA
Platinum Spark PlugPlatinum
Fitment notes — MOTORCRAFT SP497X
Platinum Spark PlugPlatinumGround Electrode Tip Material: Nickel
.050"/1.3mm
View on
Amazon
MOTORCRAFT Fits: 5.9L V12 SP485X
🇺🇸 US 🇨🇦 CA
Platinum Spark PlugPlatinum
Fitment notes — MOTORCRAFT SP485X
Platinum Spark PlugPlatinumGround Electrode Tip Material: Platinum
OE Style.050"/1.3mm
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 2001 Aston Martin DB7

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug .

Frequently Asked Questions

How many ignition parts fit the 2001 Aston Martin DB7?

Our catalog currently lists 16 ignition parts for the 2001 Aston Martin DB7 across 1 subcategory and 6 brands, covering both the 3.2L L6 Supercharged and the 5.9L V12. Each part is matched to the engine(s) it fits.

Do ignition parts differ between 2001 Aston Martin DB7 engines?

Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of ignition problems on a 2001 Aston Martin DB7?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 2001 Aston Martin DB7?

Notes on this page include pre-set gaps of 0.035", 0.040", 0.044", 0.045", 0.050", 0.052" and 0.054". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2001 Aston Martin DB7 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2001 Aston Martin DB7?

First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2001 Aston Martin DB7

Ignition Parts for Other Aston Martin DB7 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.