1925 Auburn Model 6-66 Ignition Parts

Engine:
L6

The 1925 Auburn Model 6-66 has 12 ignition parts with verified fitment on this page — 4 part types and 6 brands, covering the L6 engine. Each part includes a manufacturer part number and application notes.

On the 1925 Auburn Model 6-66, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Most of the listed parts are Ignition Coil (5 parts), Distributor Rotor (4 parts) and Distributor Cap (2 parts). The other 1 part type covers the remaining 1 part.

Distributor Cap

Premium

Brand Part Number Markets Notes Buy
LILAND GLOBAL DR413LG
🇺🇸 US
Body Material: PhenolicBlack Brass
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS DR413
🇺🇸 US
View on
Amazon

This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.

Distributor Rotor

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS DR158T
🇺🇸 US
T-Series
View on
Amazon
UNITED MOTOR PRODUCTS DR650
🇺🇸 US
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
LILAND GLOBAL DR158LG
🇺🇸 US
PremiumBlack Brass
View on
Amazon
STANDARD MOTOR PRODUCTS DR158
🇺🇸 US
View on
Amazon

This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular UC14T
🇺🇸 US
T-Series6 Volt
View on
Amazon
FVP UC14F
🇺🇸 US
View on
Amazon
HOLSTEIN 2IGC0057
🇺🇸 US
View on
Amazon

Premium

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS UC14
🇺🇸 US
Blue Streak6 Volt
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
UNITED MOTOR PRODUCTS C14
🇺🇸 US
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Brand Part Number Markets Notes Buy
CHAMPION 561
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 561
Copper PlusPre-Set Gap: 0.025"
OE-Recommended Gap: 0.025"
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1925 Auburn Model 6-66

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the L6 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Ignition Coil and Distributor Rotor .

Frequently Asked Questions

How many ignition parts fit the 1925 Auburn Model 6-66?

Our catalog currently lists 12 ignition parts for the 1925 Auburn Model 6-66 across 4 subcategories and 6 brands, covering the L6 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1925 Auburn Model 6-66?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1925 Auburn Model 6-66?

Notes on this page include a 0.025" pre-set gap. Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1925 Auburn Model 6-66 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1925 Auburn Model 6-66?

Every part on this page is matched to the L6 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1925 Auburn Model 6-66

Ignition Parts for Other Auburn Model 6-66 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.