2016 Audi A7 Ignition Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

9 Ignition parts are listed for the 2016 Audi A7, in 4 part types, covering all 3 engine options (2.0L L4 Turbocharged, 3.0L V6 DIESEL Turbocharged and 3.0L V6 Supercharged). Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 2016 Audi A7, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. 8 parts of the 9 listed are Ignition Coil (4 parts), Camshaft Position Sensor (2 parts) and Crankshaft Position Sensor (2 parts). The other 1 part type covers the remaining 1 part.

Camshaft Position Sensor

Brand Part Number Markets Notes Buy
MARELLI Fits: 2.0L L4 Turbocharged SAC120
🇲🇽 MX
View on
Amazon
WALKER PRODUCTS Fits: 2.0L L4 Turbocharged 2352067
🇲🇽 MX
Sensor OnlyConnector Shape: Oval
View on
Amazon

This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.

Crankshaft Position Sensor

Brand Part Number Markets Notes Buy
MARELLI Fits: 2.0L L4 Turbocharged SAG243
🇲🇽 MX
View on
Amazon
WALKER PRODUCTS Fits: 2.0L L4 Turbocharged 2351589
🇲🇽 MX
Sensor Only
View on
Amazon

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
HOLSTEIN Fits: 2.0L L4 Turbocharged 2IGC0363
🇲🇽 MX
View on
Amazon
SKP Fits: 2.0L L4 Turbocharged SKUF529T
🇲🇽 MX
Coil on Plug
View on
Amazon
SPECTRA PREMIUM Fits: 2.0L L4 Turbocharged C766
🇲🇽 MX
Ignition Coil Mounts to Cylinder Head
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
WALKER PRODUCTS Fits: 2.0L L4 Turbocharged 9212313
🇲🇽 MX
Single Coil
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Brand Part Number Markets Notes Buy
NGK Fits: 2.0L L4 Turbocharged 94833
🇲🇽 MX
Laser PlatinumPre-Set Gap: 0.032"
Fitment notes — NGK 94833
Laser PlatinumPre-Set Gap: 0.032"
OE-Recommended Gap: 0.032 IN
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 2016 Audi A7

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Ignition Coil and Camshaft Position Sensor .

Frequently Asked Questions

How many ignition parts fit the 2016 Audi A7?

Our catalog currently lists 9 ignition parts for the 2016 Audi A7 across 4 subcategories and 6 brands, covering all 3 engine options (2.0L L4 Turbocharged, 3.0L V6 DIESEL Turbocharged and 3.0L V6 Supercharged). Each part is matched to the engine(s) it fits.

Do ignition parts differ between 2016 Audi A7 engines?

Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of ignition problems on a 2016 Audi A7?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 2016 Audi A7?

Notes on this page include a 0.032" pre-set gap. Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2016 Audi A7 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2016 Audi A7?

First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2016 Audi A7

Ignition Parts for Other Audi A7 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.