2016 Audi S5 Wheel Parts

Engine:
3.0L V6 Supercharged

The 2016 Audi S5 has 4 wheel parts with verified fitment on this page — 3 part types and 3 brands, covering the 3.0L V6 Supercharged engine. Each part includes a manufacturer part number and application notes.

On the 2016 Audi S5, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings. All 4 listed parts are Valve Stem Cap (2 parts), Lug Nut Cover / Insert (1 part) and Lug Nut Lock (1 part).

Lug Nut Cover / Insert

Brand Part Number Markets Notes Buy
ÜRO PARTS 321601173AZ37
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Grey
View on
Amazon

This table covers the Lug Nut Cover inserts.

Lug Nut Lock

Brand Part Number Markets Notes Buy
MCGARD 28018
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M14 x 1.5 Radius Seat Style Wheel Lock Bolts- 26.7mm Shank(4 Locks / 1 Key)
View on
Amazon

This table covers the locking lug nuts and keys.

Valve Stem Cap

Brand Part Number Markets Notes Buy
SCHRADER 20795
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Green Cap indicates nitrogen filled tiresSnap-In
Fitment notes — SCHRADER 20795
Green Cap indicates nitrogen filled tiresSnap-InValve Type ShortPack of 100
View on
Amazon
SCHRADER 21095
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Short CapAttachment: Snap-In
View on
Amazon

This table covers the protective dust caps for TPMS and standard valve stems. Typical signs include a missing cap, a slow TPMS leak, or grit packed in the stem. Use the cap type the notes call for — some TPMS stems need a specific seal under the cap.

Buying Wheel Parts for a 2016 Audi S5

On this vehicle, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings.

  • Confirm you have the 3.0L V6 Supercharged engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Valve Stem Cap and Lug Nut Cover / Insert .

Frequently Asked Questions

How many wheel parts fit the 2016 Audi S5?

Our catalog currently lists 4 wheel parts for the 2016 Audi S5 across 3 subcategories and 3 brands, covering the 3.0L V6 Supercharged engine. Each part is matched to the engine(s) it fits.

What are the signs of wheel problems on a 2016 Audi S5?

Common symptoms include a TPMS light that will not clear, vibration after a wheel was serviced, or studs damaged by past over-torquing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2016 Audi S5 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2016 Audi S5?

Every part on this page is matched to the 3.0L V6 Supercharged engine. Then always torque lug nuts to spec in a star pattern — impact guns without torque sticks warp rotors and stretch studs. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2016 Audi S5

Wheel Parts for Other Audi S5 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.