This page lists 5 wheel parts for the 2016 Audi S7, across 4 part types, covering the 4.0L V8 Turbocharged engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 2016 Audi S7, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings. Most of the listed parts are Tire Pressure Monitoring System (TPMS) Stem / Service Kit (2 parts), Lug Nut Cover / Insert (1 part) and Lug Nut Lock (1 part). The other 1 part type covers the remaining 1 part.
Every part on this page is matched to the 4.0L V8 Turbocharged — the only engine offered in the 2016 Audi S7.
The most listed brands for 2016 Audi S7 wheel parts are BOSCH (2 parts), ÜRO PARTS (1 part) and MCGARD (1 part), plus 1 more brand.
Each part number listed for the 2016 Audi S7 opens a page with every vehicle that part fits.
Lug Nut Cover / Insert
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ÜRO PARTS | 321601173AZ37 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Grey | View on Amazon |
This table covers the Lug Nut Cover inserts.
One part is listed for the 2016 Audi S7 — ÜRO PARTS 321601173AZ37.
Lug Nut Lock
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MCGARD | 28018 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M14 x 1.5 Radius Seat Style Wheel Lock Bolts- 26.7mm Shank(4 Locks / 1 Key) | View on Amazon |
This table covers the locking lug nuts and keys.
One part is listed for the 2016 Audi S7 — MCGARD 28018.
Tire Pressure Monitoring System (TPMS) Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BH SENS | RDE048V21 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Quality 433MHZ Replacement SensorNo Programming Required | View on Amazon |
This table covers the TPMS sensors mounted in each wheel. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
This group shows a single part: BH SENS RDE048V21.
Tire Pressure Monitoring System (TPMS) Stem / Service Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH | QFP085 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tire Pressure Monitoring System (TPMS) Sensor | View on Amazon |
| BOSCH | QFP086 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tire Pressure Monitoring System (TPMS) Sensor | View on Amazon |
This table covers TPMS valve stems and the service kits used when a tire is changed.
BOSCH supplies both parts for the 2016 Audi S7.
Part numbers include BOSCH QFP085 and BOSCH QFP086.
Buying Wheel Parts for a 2016 Audi S7
On this vehicle, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings.
- Confirm you have the 4.0L V8 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tire Pressure Monitoring System (TPMS) Stem / Service Kit and Lug Nut Cover / Insert .
Frequently Asked Questions
How many wheel parts fit the 2016 Audi S7?
Our catalog currently lists 5 wheel parts for the 2016 Audi S7 across 4 subcategories and 4 brands, covering the 4.0L V8 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of wheel problems on a 2016 Audi S7?
Common symptoms include a TPMS light that will not clear, vibration after a wheel was serviced, or studs damaged by past over-torquing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2016 Audi S7 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2016 Audi S7?
Every part on this page is matched to the 4.0L V8 Turbocharged engine. Then always torque lug nuts to spec in a star pattern — impact guns without torque sticks warp rotors and stretch studs. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2016 Audi S7
Wheel Parts for Other Audi S7 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.