2017 Audi Q3 Suspension Parts

This table covers the cam bolts and plates used to set camber at the knuckle. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

One part is listed for the 2017 Audi Q3 — MOOG K100407.

This table covers the ball joints that articulate each control arm at the knuckle. Read more

24 Ball Joint parts are listed for the 2017 Audi Q3, from MEVOTECH, MOOG, QUICK STEER and 6 other brands. MEVOTECH MS10511 carries the "Popular" badge.

The Daily Driver section lists 12 options from MOOG, MEVOTECH, SUSPENSIA and 2 other brands — grouped for everyday commuting duty. MEVOTECH MS10511 is listed in this group.

In the Economy grade, QUICK STEER, SKP, BECK/ARNLEY and 2 other brands supply 12 parts: the catalog's value-priced group. A representative part number is SKP SK80662.

This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm. Read more

43 Control Arm parts are listed for the 2017 Audi Q3, from MEVOTECH, SUSPENSIA, MOOG and 5 other brands. DORMAN 522731 carries the "Popular" badge. They are grouped as Daily Driver and Economy, with Daily Driver the largest group at 28 parts from SUSPENSIA, MEVOTECH, MOOG and 2 other brands.

This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

15 Control Arm Bushing parts are listed for the 2017 Audi Q3, from MEVOTECH, DORMAN, SUSPENSIA and 3 other brands. MEVOTECH MS70403 carries the "Popular" badge.

The Daily Driver section: 8 options from SUSPENSIA, MEVOTECH, MOOG and 1 other brand. MEVOTECH MS70403 is listed in this group.

Economy: 7 parts, from DORMAN, MEVOTECH and FVP. A representative part number is DORMAN 905537.

This table covers the Front End kits. Read more

This group shows a single part: SUSPENSIA X52CR6258.

This table covers the Ride Height sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

2 Ride Height Sensor parts are listed for the 2017 Audi Q3, from ARNOTT and MONROE.

Part numbers include ARNOTT RH5308 and MONROE HS10032.

This table covers the shocks and struts that damp wheel motion. Typical signs include a nose that keeps bouncing, cupped tires, or fluid weeping down the body. Replace shocks or struts in axle pairs and renew the mounts if they are torn or collapsed. Read more

13 Shock / Strut parts are listed for the 2017 Audi Q3, from MONROE, PRT, FCS and 3 other brands. FCS 346337 carries the "Popular" badge.

Economy: 5 parts, from PRT, HL MANDO and MONROE. A representative part number is HL MANDO MSS021054.

In the Original Ride Quality grade, FCS, MONROE, KYB and 1 other brand supply 8 parts: grouped under the catalog's "Original Ride Quality" designation — the notes column spells out what sets them apart. A representative part number is FCS 346337.

This table covers the Shock / Strut bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2017 Audi Q3 — VNE 4009015.

This table covers the Shock / Strut bellows. Read more

3 Shock / Strut Bellow parts for the 2017 Audi Q3 come from 2 brands — SACHS and MONROE.

This group includes MONROE 63640, SACHS 900303 and SACHS 900202.

This table covers the upper mounts (and bearings) a strut bolts through at the tower. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Shock / Strut Mount parts for the 2017 Audi Q3 come from 4 brands — MONROE, BECK/ARNLEY, SACHS and 1 other brand. The "Popular" part is MONROE 907949.

Daily Driver: 4 parts, from MONROE, BECK/ARNLEY and SACHS. A representative part number is MONROE 907949.

The Economy section: 1 option from DEA / MARMON RIDE CONTROL. DEA / MARMON RIDE CONTROL 4714158 is listed in this group.

This group includes MONROE 907949, BECK/ARNLEY 1018192 and MONROE 908923 and the remaining parts above.

This table covers the Shock Dust covers. Read more

One part is listed for the 2017 Audi Q3 — MARELLI KPR088.

This table covers the Subframe bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2017 Audi Q3 — BECK/ARNLEY 1042298.

This table covers the bushings that clamp the anti-roll bar to the chassis. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2017 Audi Q3 — SUSPENSIA X52BU0423.

This table covers the links that connect the anti-roll bar to each control arm or strut. Typical signs include a clunk on one wheel over a driveway, or a rattle that goes away when you lean on the bar. Replace links in pairs; a seized stud often takes the bushing with it. Read more

22 Sway Bar Link parts are listed for the 2017 Audi Q3, from MEVOTECH, SUSPENSIA, MOOG and 6 other brands. MEVOTECH MK80478 carries the "Popular" badge.

The Daily Driver section: 11 options from SUSPENSIA, MEVOTECH, MOOG and 2 other brands. MEVOTECH MK80478 is listed in this group.

Economy: 10 parts, from MEVOTECH, QUICK STEER, SKP and 2 other brands. A representative part number is MEVOTECH GK80478.

The Premium section lists 1 option from MEVOTECH — a step above OE specification in materials, tolerances or warranty terms. MEVOTECH TXMS70871 is listed in this group.