The 2017 Audi Q7 has 4 wheel parts with verified fitment on this page — 3 part types and 3 brands, covering all 3 engine options (2.0L L4 Turbocharged, 3.0L V6 DIESEL Turbocharged and 3.0L V6 Supercharged). Each part includes a manufacturer part number and application notes.
On the 2017 Audi Q7, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings. All 4 listed parts are Tire Pressure Monitoring System (TPMS) Sensor (2 parts), Lug Nut Lock (1 part) and Tire Pressure Monitoring System (TPMS) Sensor Retrofit Kit (1 part).
The 2017 Audi Q7 was sold with 3 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
3 brands supply wheel parts for the 2017 Audi Q7, led by SCHRADER (2 parts), MCGARD (1 part) and BH SENS (1 part).
Each part number listed for the 2017 Audi Q7 opens a page with every vehicle that part fits.
Lug Nut Lock
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MCGARD Fits: 3.0L V6 DIESEL Turbocharged | 28020 | 🇲🇽 MX | M14 x 1.5 Radius Seat Style Wheel Lock Bolts- 28.2mm Shank(4 Locks / 1 Key) | View on Amazon |
This table covers the locking lug nuts and keys.
This group shows a single part: MCGARD 28020.
Tire Pressure Monitoring System (TPMS) Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BH SENS Fits: 3.0L V6 DIESEL Turbocharged | RDE048V21 | 🇲🇽 MX | OE Quality 433MHZ Replacement SensorNo Programming Required | View on Amazon |
| SCHRADER Fits: 3.0L V6 DIESEL Turbocharged | 29085 | 🇲🇽 MX | ProgrammedIncludes Mounting Hardware | View on Amazon |
This table covers the TPMS sensors mounted in each wheel. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
2 Tire Pressure Monitoring System (TPMS) Sensor parts are listed for the 2017 Audi Q7, from BH SENS and SCHRADER.
Part numbers include BH SENS RDE048V21 and SCHRADER 29085.
Tire Pressure Monitoring System (TPMS) Sensor Retrofit Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER Fits: 3.0L V6 DIESEL Turbocharged | 295002 | 🇲🇽 MX | Schrader TPMS Retrofit Kit For trailers, Tow behind campers, and RVSPack of 2 | View on Amazon |
This table covers the Tire Pressure Monitoring System (TPMS) Sensor Retrofit kits.
This group shows a single part: SCHRADER 295002.
Buying Wheel Parts for a 2017 Audi Q7
On this vehicle, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings.
- Match the engine first. Every wheel part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tire Pressure Monitoring System (TPMS) Sensor and Lug Nut Lock .
Frequently Asked Questions
How many wheel parts fit the 2017 Audi Q7?
Our catalog currently lists 4 wheel parts for the 2017 Audi Q7 across 3 subcategories and 3 brands, covering all 3 engine options (2.0L L4 Turbocharged, 3.0L V6 DIESEL Turbocharged and 3.0L V6 Supercharged). Each part is matched to the engine(s) it fits.
Do wheel parts differ between 2017 Audi Q7 engines?
Yes. Every wheel part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of wheel problems on a 2017 Audi Q7?
Common symptoms include a TPMS light that will not clear, vibration after a wheel was serviced, or studs damaged by past over-torquing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2017 Audi Q7 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2017 Audi Q7?
First match the engine — each row shows which engine(s) the part fits. Then always torque lug nuts to spec in a star pattern — impact guns without torque sticks warp rotors and stretch studs. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2017 Audi Q7
Wheel Parts for Other Audi Q7 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.