9 Suspension parts are listed for the 2018 Audi R8, in 3 part types, covering the 5.2L V10 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2018 Audi R8, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links. All 9 listed parts are Sway Bar Bushing (6 parts), Ride Height Sensor (2 parts) and Ball Joint Nut / Washer (1 part).
Every part on this page is matched to the 5.2L V10 — the only engine offered in the 2018 Audi R8.
The most listed brands for 2018 Audi R8 suspension parts are VEMO (2 parts), MEVOTECH (2 parts) and REIN (1 part), plus 4 more brands. Quality grades include Daily Driver and Economy.
2 parts on this 2018 Audi R8 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including MEVOTECH MS70848 (Sway Bar Bushing) and MOOG K201343 (Sway Bar Bushing). Click any part number to see every vehicle that part fits.
Ball Joint Nut / Washer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN | HWN0118 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front14x1.5mm | View on Amazon |
This table covers the Ball Joint Nut washers.
This group shows a single part: REIN HWN0118.
Ride Height Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VEMO | V10720064 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left | View on Amazon |
| VEMO | V10720065 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
This table covers the Ride Height sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
2 Ride Height Sensor parts for the 2018 Audi R8 come from VEMO.
Part numbers include VEMO V10720064 and VEMO V10720065.
Sway Bar Bushing
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MEVOTECH Popular | MS70848 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Supreme | View on Amazon |
| MOOG Popular | K201343 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front To FramePR Code 1BA, 1BE, 1BH OR 2MN | View on Amazon |
| ACDELCO | 45F2073 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| LEMFÖRDER | 2996701 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontBase Model or Plus Model or Plus Spyder or RWS Model or Spyder | View on Amazon |
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 545901 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front29mm Sway Bar Diameter | View on Amazon |
| MEVOTECH | GS70848 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Original Grade | View on Amazon |
This table covers the bushings that clamp the anti-roll bar to the chassis. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.
6 Sway Bar Bushing parts for the 2018 Audi R8 come from 5 brands — MEVOTECH, MOOG, ACDELCO and 2 other brands. The "Popular" part is MEVOTECH MS70848.
In the Daily Driver grade, MEVOTECH, MOOG, ACDELCO and 1 other brand supply 4 parts: grouped for everyday commuting duty. A representative part number is MEVOTECH MS70848.
The Economy section lists 2 options from DORMAN and MEVOTECH — the catalog's value-priced group. DORMAN 545901 is listed in this group.
This group includes MEVOTECH MS70848, MOOG K201343 and ACDELCO 45F2073 and the remaining parts above.
Buying Suspension Parts for a 2018 Audi R8
On this vehicle, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links.
- Confirm you have the 5.2L V10 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Sway Bar Bushing and Ride Height Sensor .
Frequently Asked Questions
How many suspension parts fit the 2018 Audi R8?
Our catalog currently lists 9 suspension parts for the 2018 Audi R8 across 3 subcategories and 7 brands, covering the 5.2L V10 engine. Each part is matched to the engine(s) it fits.
What are the signs of suspension problems on a 2018 Audi R8?
Common symptoms include clunks over speed bumps, wandering steering, cupped tire wear, or a nose that keeps bouncing after a dip. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Audi R8 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2018 Audi R8?
Every part on this page is matched to the 5.2L V10 engine. Then worn bushings often mimic bad shocks — inspect before buying, and remember loaded vs unloaded strut assemblies differ in labor by hours. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2018 Audi R8
Suspension Parts for Other Audi R8 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.