2018 Audi S4 Drivetrain Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

16 Drivetrain parts are listed for the 2018 Audi S4, in 5 part types, covering both the 3.0L V6 Supercharged and the 3.0L V6 Turbocharged. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 2018 Audi S4, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. Most of the listed parts are CV Axle (6 parts), CV Joint Boot (4 parts) and Drive Shaft (4 parts). The other 2 part types cover the remaining 2 parts.

Axle Shaft Seal

Brand Part Number Markets Notes Buy
TIMKEN Fits: 3.0L V6 Supercharged SL260517
🇲🇽 MX
RearExcept Active Differential
View on
Amazon

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

CV Axle

Premium

Brand Part Number Markets Notes Buy
TOP NOTCH Popular Fits: 3.0L V6 Supercharged TN19007PR
🇲🇽 MX
Performance
Fitment notes — TOP NOTCH TN19007PR
Performance
Front
View on
Amazon
GSP Fits: 3.0L V6 Supercharged PR23011
🇲🇽 MX
Performance Revolution
Fitment notes — GSP PR23011
Performance Revolution
Front
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
APWI Fits: 3.0L V6 Supercharged AD8352
🇲🇽 MX
Front
View on
Amazon
GSP Fits: 3.0L V6 Supercharged NCV23011
🇲🇽 MX
Front
View on
Amazon
TOP NOTCH Fits: 3.0L V6 Supercharged TN19007
🇲🇽 MX
Front
View on
Amazon
Brand Part Number Markets Notes Buy
GKN Fits: 3.0L V6 Supercharged GKND12939
🇲🇽 MX
Outboard Joint Type: Fix Ball Joint SX
Fitment notes — GKN GKND12939
Outboard Joint Type: Fix Ball Joint SX
Front
View on
Amazon

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.

CV Joint

Brand Part Number Markets Notes Buy
GKN Fits: 3.0L V6 Supercharged 306277
🇲🇽 MX
Pre-lubricatedThermosplastic Elastomer (TPE)
Fitment notes — GKN 306277
Pre-lubricatedThermosplastic Elastomer (TPE)
Fits:
Front Left OuterLength 42 mm
or:
Front Right OuterLength 42 mm
View on
Amazon

This table covers the constant-velocity joints at each end of a drive axle.

CV Joint Boot

Brand Part Number Markets Notes Buy
BECK/ARNLEY Fits: 3.0L V6 Supercharged 1033141
🇲🇽 MX
Front Outer
View on
Amazon
GKN Fits: 3.0L V6 Supercharged 306313
🇲🇽 MX
OUTER Diameter 1.023 InThermoplastic Elastomer
Fitment notes — GKN 306313
OUTER Diameter 1.023 InThermoplastic Elastomer
Fits:
Rear Left Outer
or:
Rear Right Outer
View on
Amazon
GKN Fits: 3.0L V6 Supercharged 306188
🇲🇽 MX
OUTER Diameter 1.063 InThermoplastic Elastomer
Fitment notes — GKN 306188
OUTER Diameter 1.063 InThermoplastic Elastomer
Fits:
Front Right Inner
or:
Front Left Inner
View on
Amazon
REIN Fits: 3.0L V6 Supercharged BKN0109
🇲🇽 MX
Front Outer
View on
Amazon

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn.

Drive Shaft

Brand Part Number Markets Notes Buy
GKN Fits: 3.0L V6 Supercharged GKNP20093
🇲🇽 MX
View on
Amazon
GSP Fits: 3.0L V6 Supercharged PS901720
🇲🇽 MX
Rear
View on
Amazon
TOP NOTCH Fits: 3.0L V6 Supercharged TN2338PS
🇲🇽 MX
Rear
View on
Amazon
VAICO Fits: 3.0L V6 Supercharged V107729
🇲🇽 MX
Length: 463From 01/25/2016
Fitment notes — VAICO V107729
Length: 463From 01/25/2016To 06/27/2022
View on
Amazon

This table covers the driveshafts that carry torque from the transmission or transfer case.

Buying Drivetrain Parts for a 2018 Audi S4

On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.

  • Match the engine first. Every drivetrain part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: CV Axle and CV Joint Boot .

Frequently Asked Questions

How many drivetrain parts fit the 2018 Audi S4?

Our catalog currently lists 16 drivetrain parts for the 2018 Audi S4 across 5 subcategories and 8 brands, covering both the 3.0L V6 Supercharged and the 3.0L V6 Turbocharged. Each part is matched to the engine(s) it fits.

Do drivetrain parts differ between 2018 Audi S4 engines?

Yes. Every drivetrain part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of drivetrain problems on a 2018 Audi S4?

Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Audi S4 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2018 Audi S4?

First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2018 Audi S4

Drivetrain Parts for Other Audi S4 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.