The 2018 Audi SQ5 has 114 engine parts with verified fitment on this page — 40 part types and 44 brands, covering both the 3.0L V6 Supercharged and the 3.0L V6 Turbocharged. Each part includes a manufacturer part number and application notes.
The engine on the 2018 Audi SQ5 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil (16 parts), Oil Filter (10 parts) and Motor Mount (9 parts). The other 37 part types cover the remaining 79 parts.
The 2018 Audi SQ5 was sold with both the 3.0L V6 Supercharged and the 3.0L V6 Turbocharged. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2018 Audi SQ5 engine parts are AJUSA (19 parts), VICTOR REINZ (10 parts) and PENTOSIN (9 parts), plus 41 more brands. Quality grades include Standard Replacement and Economy.
13 parts on this 2018 Audi SQ5 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including BCA NS224200 (Camshaft Seal) and VICTOR REINZ 813555300 (Crankshaft Seal). Click any part number to see every vehicle that part fits.
Camshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 3.0L V6 Turbocharged | NS99166 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| NATIONAL Fits: 3.0L V6 Turbocharged | 99166 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WJB / INMOTION PARTS Fits: 3.0L V6 Turbocharged | WS99166 | 🇺🇸 US 🇨🇦 CA | Shaft Diameter Minimum (In): 1.647 In | View on Amazon |
This table covers the wear sleeves used to restore a Camshaft seal surface.
3 Camshaft Repair Sleeve parts are listed for the 2018 Audi SQ5, from BCA, NATIONAL and WJB / INMOTION PARTS.
Part numbers include BCA NS99166, NATIONAL 99166 and WJB / INMOTION PARTS WS99166.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Popular Fits: 3.0L V6 Turbocharged | NS224200 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ACDELCO Fits: 3.0L V6 Turbocharged | 224200 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| NATIONAL Fits: 3.0L V6 Turbocharged | 224200 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SCHAEFFLER Fits: 3.0L V6 Turbocharged | SS2719 | 🇺🇸 US 🇨🇦 CA | 2.17" O.D. X 0.28" Width | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.0L V6 Turbocharged | WS224200 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Camshaft Seal parts are listed for the 2018 Audi SQ5, from BCA, ACDELCO, NATIONAL and 2 other brands. BCA NS224200 carries the "Popular" badge.
Part numbers include BCA NS224200 and ACDELCO 224200, among others listed above.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 54261900 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.0L V6 Turbocharged | 081016401 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Conversion / Lower Gasket Set parts for the 2018 Audi SQ5 come from 2 brands — AJUSA and VICTOR REINZ.
This group includes AJUSA 54261900 and VICTOR REINZ 081016401.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Fits: 3.0L V6 Turbocharged | WS99333 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
One part is listed for the 2018 Audi SQ5 — WJB / INMOTION PARTS WS99333.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ Popular Fits: 3.0L V6 Turbocharged | 813555300 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 15088800 | 🇺🇸 US 🇨🇦 CA | FrontClockwise | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 15084000 | 🇺🇸 US 🇨🇦 CA | RearCounter Clockwise | View on Amazon |
| MAHLE / CLEVITE Fits: 3.0L V6 Turbocharged | 67830 | 🇺🇸 US 🇨🇦 CA | PTFE (Polytetrafluoroethylene) | View on Amazon |
| VICTOR REINZ Fits: 3.0L V6 Turbocharged | 813602700 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Crankshaft Seal parts are listed for the 2018 Audi SQ5, from VICTOR REINZ, AJUSA and MAHLE / CLEVITE. VICTOR REINZ 813555300 carries the "Popular" badge.
Part numbers include VICTOR REINZ 813555300, AJUSA 15088800 and AJUSA 15084000, among others listed above.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 81054000 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.0L V6 Turbocharged | GS34094 | 🇺🇸 US 🇨🇦 CA | Cylinder Head Bolt KitSet | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
2 Cylinder Head Bolt parts for the 2018 Audi SQ5 come from 2 brands — AJUSA and MAHLE / CLEVITE.
Part numbers include AJUSA 81054000 and MAHLE / CLEVITE GS34094.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 10229700 | 🇺🇸 US 🇨🇦 CA | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 10229800 | 🇺🇸 US 🇨🇦 CA | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 52500800 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 52500900 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| MAHLE / CLEVITE Fits: 3.0L V6 Turbocharged | 55545 | 🇺🇸 US 🇨🇦 CA | RightRight Side, 0.89mm Thickness, Cylinder 1,2,3 | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Cylinder Head Gasket parts for the 2018 Audi SQ5 come from 2 brands — AJUSA and MAHLE / CLEVITE.
Part numbers include AJUSA 10229700, AJUSA 10229800 and AJUSA 52500800, among others listed above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 52500700 | 🇺🇸 US 🇨🇦 CA | Complete Set | View on Amazon |
| VICTOR REINZ Fits: 3.0L V6 Turbocharged | 021005002 | 🇺🇸 US 🇨🇦 CA | For Cylinders 1 to 3 Only | View on Amazon |
| VICTOR REINZ Fits: 3.0L V6 Turbocharged | 021005102 | 🇺🇸 US 🇨🇦 CA | For Cylinders 4 to 6 Only | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Cylinder Head Gasket Set parts for the 2018 Audi SQ5 come from 2 brands — VICTOR REINZ and AJUSA.
Part numbers include AJUSA 52500700, VICTOR REINZ 021005002 and VICTOR REINZ 021005102.
Cylinder Head Temperature Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GPD Fits: 3.0L V6 Turbocharged | 1814595 | 🇺🇸 US 🇨🇦 CA | on Engine | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.0L V6 Turbocharged | TS686 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring.
2 Cylinder Head Temperature Sensor parts are listed for the 2018 Audi SQ5, from GPD and STANDARD MOTOR PRODUCTS.
Listed part numbers: GPD 1814595 and STANDARD MOTOR PRODUCTS TS686.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KAT'S HEATERS Fits: 3.0L V6 Turbocharged | 28400 | 🇺🇸 US 🇨🇦 CA | Engine Heater Replacement Cord | View on Amazon |
| KAT'S HEATERS Fits: 3.0L V6 Turbocharged | 11429 | 🇺🇸 US 🇨🇦 CA | Freeze Plug Heater | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
KAT'S HEATERS supplies both parts for the 2018 Audi SQ5.
This group includes KAT'S HEATERS 28400 and KAT'S HEATERS 11429.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 50450700 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
This group shows a single part: AJUSA 50450700.
Harmonic Balancer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ÜRO PARTS Fits: 3.0L V6 Turbocharged | 06E105251F | 🇺🇸 US 🇨🇦 CA | Pulley Only | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
This group shows a single part: ÜRO PARTS 06E105251F.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 13282800 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.0L V6 Turbocharged | 711760700 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Intake Manifold Gasket parts for the 2018 Audi SQ5 come from 2 brands — AJUSA and VICTOR REINZ.
Listed part numbers: AJUSA 13282800 and VICTOR REINZ 711760700.
Motor Mount
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 3.0L V6 Turbocharged | SK10216 | 🇺🇸 US 🇨🇦 CA | Front Rightwith Wire / Sensor | View on Amazon |
| SKP Fits: 3.0L V6 Turbocharged | SK10215 | 🇺🇸 US 🇨🇦 CA | Front Leftwith Wire / Sensor | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: 3.0L V6 Turbocharged | 10215 | 🇺🇸 US 🇨🇦 CA | Front Leftwith Wire / Sensor | View on Amazon |
| ANCHOR Fits: 3.0L V6 Turbocharged | 10216 | 🇺🇸 US 🇨🇦 CA | Front Rightwith Wire / Sensor | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.0L V6 Turbocharged | A4955 | 🇺🇸 US 🇨🇦 CA | Front Left | View on Amazon |
| PIONEER Fits: 3.0L V6 Turbocharged | 610215 | 🇺🇸 US 🇨🇦 CA | Front LeftHydraulic | View on Amazon |
| PIONEER Fits: 3.0L V6 Turbocharged | 610216 | 🇺🇸 US 🇨🇦 CA | Front RightHydraulic | View on Amazon |
| WESTAR Fits: 3.0L V6 Turbocharged | EM7552 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| WESTAR Fits: 3.0L V6 Turbocharged | EM7551 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
9 Motor Mount parts are listed for the 2018 Audi SQ5, from SKP, ANCHOR, PIONEER and 2 other brands. SKP SK10216 carries the "Popular" badge.
In the Economy grade, SKP supplies 2 parts: the catalog's value-priced group. A representative part number is SKP SK10216.
The Standard Replacement section lists 7 options from ANCHOR, PIONEER, WESTAR and 1 other brand — built to original-equipment specification. ANCHOR 10215 is listed in this group.
This group includes SKP SK10216, SKP SK10215 and ANCHOR 10215 and the remaining parts above.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 3.0L V6 Turbocharged | 300966 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Motor Mount kits.
One part is listed for the 2018 Audi SQ5 — ANCHOR 300966.
Oil
Summary: Notes list SAE 0W-20, SAE 5W-30 and SAE 5W-40. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include PENTOSIN, LIQUI MOLY and VAICO.
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY Popular Fits: 3.0L V6 Turbocharged | 20238 | 🇺🇸 US 🇨🇦 CA | Top Tec 6200 0W-205 Liter | View on Amazon |
| MOBIL Popular Fits: 3.0L V6 Turbocharged | 125386 | 🇺🇸 US 🇨🇦 CA | ESP X2 0W-20ESP X2 Full Synthetic Motor Oil 0W-20, 1 Quart | View on Amazon |
| PENTOSIN Popular Fits: 3.0L V6 Turbocharged | 8042206 | 🇺🇸 US 🇨🇦 CA | High Performance IIFull Synthetic | View on Amazon |
| PENTOSIN Popular Fits: 3.0L V6 Turbocharged | 8044206 | 🇺🇸 US 🇨🇦 CA | Pento SpeedFull Synthetic | View on Amazon |
| LIQUI MOLY Fits: 3.0L V6 Turbocharged | 20236 | 🇺🇸 US 🇨🇦 CA | Top Tec 6200 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.0L V6 Turbocharged | 22186 | 🇺🇸 US 🇨🇦 CA | Top Tec 6200 0W-2020 Liter | View on Amazon |
| PENTOSIN Fits: 3.0L V6 Turbocharged | 8043107 | 🇺🇸 US 🇨🇦 CA | High PerformanceFull Synthetic | View on Amazon |
| PENTOSIN Fits: 3.0L V6 Turbocharged | 8042107 | 🇺🇸 US 🇨🇦 CA | High Performance IIFull Synthetic | View on Amazon |
| PENTOSIN Fits: 3.0L V6 Turbocharged | 8044107 | 🇺🇸 US 🇨🇦 CA | Pento SpeedFull Synthetic | View on Amazon |
| PENTOSIN Fits: 3.0L V6 Turbocharged | 8078106 | 🇺🇸 US 🇨🇦 CA | Super Performance IIIFull Synthetic | View on Amazon |
| PENTOSIN Fits: 3.0L V6 Turbocharged | 8043206 | 🇺🇸 US 🇨🇦 CA | High PerformanceFull Synthetic | View on Amazon |
| PENTOSIN Fits: 3.0L V6 Turbocharged | 8078206 | 🇺🇸 US 🇨🇦 CA | Super Performance IIIFull Synthetic | View on Amazon |
| PENTOSIN Fits: 3.0L V6 Turbocharged | 8043208 | 🇺🇸 US 🇨🇦 CA | High PerformanceFull Synthetic | View on Amazon |
| VAICO Fits: 3.0L V6 Turbocharged | V600422 | 🇺🇸 US 🇨🇦 CA | Description: Engine Oil SAE 5W-40 C3 1 L | View on Amazon |
| VAICO Fits: 3.0L V6 Turbocharged | V600423 | 🇺🇸 US 🇨🇦 CA | Description: Engine Oil SAE 5W-40 C3 4 L | View on Amazon |
| VALVOLINE Fits: 3.0L V6 Turbocharged | 888048 | 🇺🇸 US 🇨🇦 CA | European Vehicle Full Synthetic SAE 0W-201 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
16 Oil parts are listed for the 2018 Audi SQ5, from PENTOSIN, LIQUI MOLY, VAICO and 2 other brands. LIQUI MOLY 20238 carries the "Popular" badge.
Oil Cooler
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NISSENS Fits: 3.0L V6 Turbocharged | 91445 | 🇺🇸 US | View on Amazon | |
| VEMO Fits: 3.0L V6 Turbocharged | V15606083 | 🇺🇸 US | View on Amazon |
This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.
2 Oil Cooler parts are listed for the 2018 Audi SQ5, from NISSENS and VEMO.
Part numbers include NISSENS 91445 and VEMO V15606083.
Oil Dipstick / Tube Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.0L V6 Turbocharged | 73668 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: FEL-PRO 73668.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN Fits: 3.0L V6 Turbocharged | HWP1014 | 🇺🇸 US 🇨🇦 CA | Steel | View on Amazon |
| REIN Fits: 3.0L V6 Turbocharged | HWU1014 | 🇺🇸 US 🇨🇦 CA | Aluminum | View on Amazon |
| VAICO Fits: 3.0L V6 Turbocharged | V104947 | 🇺🇸 US 🇨🇦 CA | M10X1X10Use for the Haldex Coupling | View on Amazon |
| VAICO Fits: 3.0L V6 Turbocharged | V105828 | 🇺🇸 US 🇨🇦 CA | M14X1,5 | View on Amazon |
This table covers the drain plugs in the oil pan.
4 Oil Drain Plug parts are listed for the 2018 Audi SQ5, from REIN and VAICO.
Listed part numbers: REIN HWP1014, REIN HWU1014 and VAICO V104947, plus the other parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.0L V6 Turbocharged | 095147 | 🇺🇸 US 🇨🇦 CA | SizeM14 | View on Amazon |
| DORMAN Fits: 3.0L V6 Turbocharged | 995147CD | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO Fits: 3.0L V6 Turbocharged | 73350 | 🇺🇸 US 🇨🇦 CA | 0.485 (in) Inside Diameter x 0.605 (in) Outside DiameterCopper | View on Amazon |
| JAPANESE OE Fits: 3.0L V6 Turbocharged | KW32004 | 🇺🇸 US 🇨🇦 CA | KP | View on Amazon |
| ULTRA-POWER Fits: 3.0L V6 Turbocharged | 095147 | 🇺🇸 US 🇨🇦 CA | ID: 0.556"aluminum Gasket | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Oil Drain Plug Gasket parts for the 2018 Audi SQ5 come from 4 brands — DORMAN, FEL-PRO, JAPANESE OE and 1 other brand. The "Popular" part is DORMAN 095147.
Listed part numbers: DORMAN 095147, DORMAN 995147CD and FEL-PRO 73350, plus the other parts above.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD Fits: 3.0L V6 Turbocharged | MO153 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the caps on the oil filler neck.
One part is listed for the 2018 Audi SQ5 — MOTORAD MO153.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMP / LUBER-FINER Fits: 3.0L V6 Turbocharged | P1074 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ULTRA-POWER Fits: 3.0L V6 Turbocharged | WL10438 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits or OE # 06M198405F | View on Amazon |
| VAICO Fits: 3.0L V6 Turbocharged | V450179 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HENGST Popular Fits: 3.0L V6 Turbocharged | E914HD398 | 🇺🇸 US 🇨🇦 CA | Cartridge with Gasket Kit | View on Amazon |
| WIX Popular Fits: 3.0L V6 Turbocharged | WL10438 | 🇺🇸 US 🇨🇦 CA | Synthetic Media | View on Amazon |
| ACDELCO Fits: 3.0L V6 Turbocharged | PF702G | 🇺🇸 US 🇨🇦 CA | Gold / Professional | View on Amazon |
| FEL-PRO Fits: 3.0L V6 Turbocharged | OFCS2055 | 🇺🇸 US 🇨🇦 CA | Includes Cap and Filter | View on Amazon |
| MAHLE / CLEVITE Fits: 3.0L V6 Turbocharged | OX1348 | 🇺🇸 US 🇨🇦 CA | Cartridge | View on Amazon |
| MANN Fits: 3.0L V6 Turbocharged | HU7049Z | 🇺🇸 US 🇨🇦 CA | Class: C | View on Amazon |
| VARIOUS MFR Fits: 3.0L V6 Turbocharged | PO99500EX | 🇺🇸 US 🇨🇦 CA | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
10 Oil Filter parts are listed for the 2018 Audi SQ5, from CHAMP / LUBER-FINER, ULTRA-POWER, VAICO and 7 other brands. HENGST E914HD398 carries the "Popular" badge.
Economy: 3 parts, from CHAMP / LUBER-FINER, ULTRA-POWER and VAICO. A representative part number is CHAMP / LUBER-FINER P1074.
The Standard Replacement section: 7 options from HENGST, WIX, ACDELCO and 4 other brands. HENGST E914HD398 is listed in this group.
Oil Filter Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD Fits: 3.0L V6 Turbocharged | MO374 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Filter covers.
This group shows a single part: MOTORAD MO374.
Oil Filter Housing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.0L V6 Turbocharged | 926528 | 🇺🇸 US 🇨🇦 CA | OE FIX | View on Amazon |
| REIN Fits: 3.0L V6 Turbocharged | HEU0119 | 🇺🇸 US 🇨🇦 CA | with Aluminum Housing | View on Amazon |
This table covers the Oil Filter housings.
2 Oil Filter Housing parts for the 2018 Audi SQ5 come from 2 brands — DORMAN and REIN.
Listed part numbers: DORMAN 926528 and REIN HEU0119.
Oil Level Sensor Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 01899000 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
One part is listed for the 2018 Audi SQ5 — AJUSA 01899000.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Fits: 3.0L V6 Turbocharged | SK264581 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
This group shows a single part: SKP SK264581.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.0L V6 Turbocharged | 030793 | 🇺🇸 US 🇨🇦 CA | Dirko HT | View on Amazon |
| VICTOR REINZ Fits: 3.0L V6 Turbocharged | 703141410 | 🇺🇸 US 🇨🇦 CA | RTV Silicone | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pan Gasket parts are listed for the 2018 Audi SQ5, from ELRING and VICTOR REINZ.
Listed part numbers: ELRING 030793 and VICTOR REINZ 703141410.
Oil Pump
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIERBURG Fits: 3.0L V6 Turbocharged | 707919140 | 🇺🇸 US 🇨🇦 CA | Number of Teeth: 22Pump Type: Gear Pump | View on Amazon |
This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.
One part is listed for the 2018 Audi SQ5 — PIERBURG 707919140.
Supercharger Pressure Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 3.0L V6 Turbocharged | 5S15123 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Supercharger pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor.
One part is listed for the 2018 Audi SQ5 — WELLS 5S15123.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| INA Fits: 3.0L V6 Turbocharged | ZC02491 | 🇺🇸 US 🇨🇦 CA | Center UpperAuxiliary to Cam | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
This group shows a single part: INA ZC02491.
Timing Chain Guide / Damper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ÜRO PARTS Fits: 3.0L V6 Turbocharged | 079109470 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
This table covers the guides and dampers that keep the timing chain on its path.
This group shows a single part: ÜRO PARTS 079109470.
Turbocharger
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ROTOMASTER Fits: 3.0L V6 Turbocharged | K1030177N | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the turbochargers that compress intake air.
One part is listed for the 2018 Audi SQ5 — ROTOMASTER K1030177N.
Turbocharger Boost Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Fits: 3.0L V6 Turbocharged | 0261232022 | 🇺🇸 US 🇨🇦 CA | Turbocharger Boost Sensor | View on Amazon |
| WELLS Fits: 3.0L V6 Turbocharged | 5S15123 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
2 Turbocharger Boost Sensor parts for the 2018 Audi SQ5 come from 2 brands — BOSCH and WELLS.
Listed part numbers: BOSCH 0261232022 and WELLS 5S15123.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | JTC12476 | 🇺🇸 US 🇨🇦 CA | Mounting Gasket Set | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: AJUSA JTC12476.
Turbocharger Oil Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | OP11063 | 🇺🇸 US 🇨🇦 CA | Supply tube | View on Amazon |
This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
One part is listed for the 2018 Audi SQ5 — AJUSA OP11063.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 11148000 | 🇺🇸 US 🇨🇦 CA | For Cylinders 4 to 6 Only | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 11148100 | 🇺🇸 US 🇨🇦 CA | For Cylinders 1 to 3 Only | View on Amazon |
| VICTOR REINZ Fits: 3.0L V6 Turbocharged | 711761000 | 🇺🇸 US 🇨🇦 CA | For Cylinders 1 to 3 Only | View on Amazon |
| VICTOR REINZ Fits: 3.0L V6 Turbocharged | 711761400 | 🇺🇸 US 🇨🇦 CA | For Cylinders 4 to 6 Only | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Valve Cover Gasket parts are listed for the 2018 Audi SQ5, from AJUSA and VICTOR REINZ.
This group includes AJUSA 11148000, AJUSA 11148100 and VICTOR REINZ 711761000 and the remaining parts above.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 85009000 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
One part is listed for the 2018 Audi SQ5 — AJUSA 85009000.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 3.0L V6 Turbocharged | VL1098 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| QUALCAST Fits: 3.0L V6 Turbocharged | 345021 | 🇺🇸 US 🇨🇦 CA | 3 Round Beads. 0.234 Stem | View on Amazon |
| SBI Fits: 3.0L V6 Turbocharged | 1211098 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2050 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
3 Valve Spring Retainer Keeper parts for the 2018 Audi SQ5 come from 3 brands — MELLING, QUALCAST and SBI.
Listed part numbers: MELLING VL1098, QUALCAST 345021 and SBI 1211098.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Popular Fits: 3.0L V6 Turbocharged | SS45940A | 🇺🇸 US 🇨🇦 CA | Fluoroelastomer | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.0L V6 Turbocharged | SS45976 | 🇺🇸 US 🇨🇦 CA | Contains 12 PiecesMetal with Molded Rubber | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 12037600 | 🇺🇸 US 🇨🇦 CA | Exhaust5.6 x 10.7 x 21.6 | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 57077400 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.0L V6 Turbocharged | SS46125 | 🇺🇸 US 🇨🇦 CA | SetMetal with Molded Rubber | View on Amazon |
| VICTOR REINZ Fits: 3.0L V6 Turbocharged | 121760902 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
6 Valve Stem Seal parts are listed for the 2018 Audi SQ5, from MAHLE / CLEVITE, AJUSA and VICTOR REINZ. MAHLE / CLEVITE SS45940A carries the "Popular" badge.
Part numbers include MAHLE / CLEVITE SS45940A, MAHLE / CLEVITE SS45976 and AJUSA 12037600, among others listed above.
Variable Valve Timing (VVT) Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 3.0L V6 Turbocharged | VVT779 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
This table covers the cam phaser sprockets used by the variable-valve-timing system.
One part is listed for the 2018 Audi SQ5 — STANDARD MOTOR PRODUCTS VVT779.
Buying Engine Parts for a 2018 Audi SQ5
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 2018 Audi SQ5?
Our catalog currently lists 114 engine parts for the 2018 Audi SQ5 across 40 subcategories and 44 brands, covering both the 3.0L V6 Supercharged and the 3.0L V6 Turbocharged. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2018 Audi SQ5 engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2018 Audi SQ5?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2018 Audi SQ5?
Oil rows on this page include SAE 0W-20, SAE 5W-30 and SAE 5W-40. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Audi SQ5 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2018 Audi SQ5?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2018 Audi SQ5
Engine Parts for Other Audi SQ5 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.