2019 Audi Q2 Steering Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

11 Steering parts are listed for the 2019 Audi Q2, in 3 part types, covering both the 1.4L L4 Turbocharged and the 2.0L L4 Turbocharged. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 2019 Audi Q2, the steering system connects driver to road through the rack, pump, tie rods, and column components. All 11 listed parts are Tie Rod End (8 parts), O-Ring (2 parts) and Power Steering Pump Seal Kit (1 part).

O-Ring

Brand Part Number Markets Notes Buy
ELRING Fits: all 2019 Q2 engines 939710
🇲🇽 MX
Inner Diameter [MM]: 28.3Material: Epdm ethylene propylene diene Monomer (M-class) rubber
Fitment notes — ELRING 939710
Inner Diameter [MM]: 28.3Material: Epdm ethylene propylene diene Monomer (M-class) rubber
Dynamic
View on
Amazon
ELRING Fits: all 2019 Q2 engines 644190
🇲🇽 MX
Dynamic
View on
Amazon

This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Power Steering Pump Seal Kit

Brand Part Number Markets Notes Buy
ELRING Fits: 2.0L L4 Turbocharged 147480
🇲🇽 MX
All-wheel drive (regulated electronically)
View on
Amazon

This table covers the Power Steering Pump Seal kits.

Tie Rod End

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: all 2019 Q2 engines 544101
🇲🇽 MX
Front Left Outerwith Steel Wheel Knuckles
View on
Amazon
DORMAN Popular Fits: all 2019 Q2 engines 543401
🇲🇽 MX
Front Inner
View on
Amazon
DORMAN Fits: all 2019 Q2 engines 534918
🇲🇽 MX
Front Right Outerwith Steel Wheel Knuckles
View on
Amazon
DORMAN Fits: all 2019 Q2 engines 544097
🇲🇽 MX
Front Left Outerwith Aluminum Wheel Knuckles
View on
Amazon
DORMAN Fits: all 2019 Q2 engines 544098
🇲🇽 MX
Front Right Outerwith Aluminum Wheel Knuckles
View on
Amazon
FVP Fits: all 2019 Q2 engines TO43001
🇲🇽 MX
Front Left Outerwith Steel Wheel Knuckles
View on
Amazon
FVP Fits: all 2019 Q2 engines TO43002
🇲🇽 MX
Front Right Outerwith Steel Wheel Knuckles
View on
Amazon
FVP Fits: all 2019 Q2 engines TI43125
🇲🇽 MX
Front Inner
View on
Amazon

This table covers the inner and outer tie-rod ends that steer each front knuckle. Typical signs include play on center, a feathered front tire, or a boot that has split and packed with grit. Replace inner and outer ends together on a high-mileage axle, then get an alignment.

Buying Steering Parts for a 2019 Audi Q2

On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.

  • Match the engine first. Some steering parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Tie Rod End and O-Ring .

Frequently Asked Questions

How many steering parts fit the 2019 Audi Q2?

Our catalog currently lists 11 steering parts for the 2019 Audi Q2 across 3 subcategories and 3 brands, covering both the 1.4L L4 Turbocharged and the 2.0L L4 Turbocharged. Each part is matched to the engine(s) it fits.

Do steering parts differ between 2019 Audi Q2 engines?

Some do. 10 parts fit every engine; the other 1 is engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of steering problems on a 2019 Audi Q2?

Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2019 Audi Q2 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2019 Audi Q2?

First match the engine — each row shows which engine(s) the part fits. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2019 Audi Q2

Steering Parts for Other Audi Q2 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.