The 2020 Audi Q8 has 6 wheel parts with verified fitment on this page — 3 part types and 4 brands, covering the 3.0L V6 Turbocharged engine. Each part includes a manufacturer part number and application notes.
On the 2020 Audi Q8, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings. All 6 listed parts are Tire Pressure Monitoring System (TPMS) Stem / Service Kit (3 parts), Tire Pressure Monitoring System (TPMS) Sensor (2 parts) and Valve Stem Cap (1 part).
Every part on this page is matched to the 3.0L V6 Turbocharged — the only engine offered in the 2020 Audi Q8.
The most listed brands for 2020 Audi Q8 wheel parts are SCHRADER (2 parts), BOSCH (2 parts) and BH SENS (1 part), plus 1 more brand.
Each part number listed for the 2020 Audi Q8 opens a page with every vehicle that part fits.
Tire Pressure Monitoring System (TPMS) Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BH SENS | RDE047V21 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Quality 433MHZ Replacement SensorNo Programming Required | View on Amazon |
| SCHRADER | 29085 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ProgrammedIncludes Mounting Hardware | View on Amazon |
This table covers the TPMS sensors mounted in each wheel. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
2 Tire Pressure Monitoring System (TPMS) Sensor parts for the 2020 Audi Q8 come from 2 brands — BH SENS and SCHRADER.
Listed part numbers: BH SENS RDE047V21 and SCHRADER 29085.
Tire Pressure Monitoring System (TPMS) Stem / Service Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ALLIGATOR | 591305 | 🇺🇸 US 🇨🇦 CA | Tire Pressure Monitoring System Sensor Service KitOE Valves with Torx Screw | View on Amazon |
| BOSCH | QFP085 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tire Pressure Monitoring System (TPMS) Sensor | View on Amazon |
| BOSCH | QFP086 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tire Pressure Monitoring System (TPMS) Sensor | View on Amazon |
This table covers TPMS valve stems and the service kits used when a tire is changed.
3 Tire Pressure Monitoring System (TPMS) Stem / Service Kit parts are listed for the 2020 Audi Q8, from BOSCH and ALLIGATOR.
This group includes ALLIGATOR 591305, BOSCH QFP085 and BOSCH QFP086.
Valve Stem Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER | 20595 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Green Cap indicates nitrogen filled tiresSnap-In | View on Amazon |
This table covers the protective dust caps for TPMS and standard valve stems. Typical signs include a missing cap, a slow TPMS leak, or grit packed in the stem. Use the cap type the notes call for — some TPMS stems need a specific seal under the cap.
This group shows a single part: SCHRADER 20595.
Buying Wheel Parts for a 2020 Audi Q8
On this vehicle, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings.
- Confirm you have the 3.0L V6 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tire Pressure Monitoring System (TPMS) Stem / Service Kit and Tire Pressure Monitoring System (TPMS) Sensor .
Frequently Asked Questions
How many wheel parts fit the 2020 Audi Q8?
Our catalog currently lists 6 wheel parts for the 2020 Audi Q8 across 3 subcategories and 4 brands, covering the 3.0L V6 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of wheel problems on a 2020 Audi Q8?
Common symptoms include a TPMS light that will not clear, vibration after a wheel was serviced, or studs damaged by past over-torquing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2020 Audi Q8 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2020 Audi Q8?
Every part on this page is matched to the 3.0L V6 Turbocharged engine. Then always torque lug nuts to spec in a star pattern — impact guns without torque sticks warp rotors and stretch studs. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2020 Audi Q8
Wheel Parts for Other Audi Q8 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.