2020 Audi S3 Suspension Parts

This table covers the ball joints that articulate each control arm at the knuckle. Read more

17 Ball Joint parts are listed for the 2020 Audi S3, from MEVOTECH, DELPHI, MOOG and 5 other brands. DELPHI TC1731 carries the "Popular" badge.

The Daily Driver section lists 8 options from DELPHI, MEVOTECH, MOOG and 1 other brand — grouped for everyday commuting duty. DELPHI TC1731 is listed in this group.

In the Economy grade, BECK/ARNLEY, FVP, MEVOTECH and 2 other brands supply 9 parts: the catalog's value-priced group. A representative part number is BECK/ARNLEY 1015973.

This table covers the bump stops that limit suspension travel. Read more

2 Bump Stop parts for the 2020 Audi S3 come from REIN.

This group includes REIN AVZ0559 and REIN AVZ0585.

This table covers the coil springs that carry vehicle weight at each corner. Typical signs include a sagging corner, a clunk through the spring, or a broken coil that you can see from the wheel well. Replace springs in axle pairs and inspect the seats and isolators while the spring is out. Read more

4 Coil Spring parts for the 2020 Audi S3 come from SUPLEX.

Listed part numbers: SUPLEX 03355, SUPLEX 39528 and SUPLEX 39561, plus the other parts above.

This table covers the rubber and polyurethane isolators that seat coil springs. Typical signs include a squeak from the spring pocket, or a spring that has walked off its seat. Replace the isolator whenever the spring is out — a crushed seat will noise a brand-new spring. Read more

One part is listed for the 2020 Audi S3 — ENERGY SUSPENSION 96118G.

This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm. Read more

41 Control Arm parts are listed for the 2020 Audi S3, from MEVOTECH, SUSPENSIA, DELPHI and 4 other brands. DELPHI TC3425 carries the "Popular" badge. Daily Driver and Economy are all represented, and Daily Driver alone accounts for 30 parts.

This table covers the bolts that anchor a control arm to the chassis or subframe. Read more

3 Control Arm Anchor Bolt parts are listed for the 2020 Audi S3, from REIN and VAICO.

Part numbers include REIN HWB1045, REIN HWB1046 and VAICO V106608.

This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

15 Control Arm Bushing parts are listed for the 2020 Audi S3, from MEVOTECH, MOOG, DORMAN and 4 other brands. MEVOTECH MS70403 carries the "Popular" badge.

The Daily Driver section: 8 options from MOOG, MEVOTECH, DELPHI and 1 other brand. MEVOTECH MS70403 is listed in this group.

Economy: 6 parts, from DORMAN, MEVOTECH and FVP. A representative part number is DORMAN 533691.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the Ride Height sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

5 Ride Height Sensor parts are listed for the 2020 Audi S3, from ÜRO PARTS and ARNOTT. ÜRO PARTS 5Q0412522C carries the "Popular" badge.

This group includes ÜRO PARTS 5Q0412522C, ARNOTT RH5296 and ARNOTT RH5222 and the remaining parts above.

This table covers the shocks and struts that damp wheel motion. Typical signs include a nose that keeps bouncing, cupped tires, or fluid weeping down the body. Replace shocks or struts in axle pairs and renew the mounts if they are torn or collapsed. Read more

6 Shock / Strut parts are listed for the 2020 Audi S3, from BILSTEIN and ARNOTT. BILSTEIN 24229937 carries the "Popular" badge.

The Increased Handling/Stability section lists 2 options from BILSTEIN — grouped under the catalog's "Increased Handling/Stability" designation — the notes column spells out what sets them apart. BILSTEIN 24229937 is listed in this group.

In the Original Ride Quality grade, ARNOTT and BILSTEIN supply 4 parts: grouped under the catalog's "Original Ride Quality" designation — the notes column spells out what sets them apart. A representative part number is ARNOTT MR5368.

Part numbers include BILSTEIN 24229937, BILSTEIN 35229919 and ARNOTT MR5368, among others listed above.

This table covers the Shock / Strut bellows. Read more

This group shows a single part: REIN SCB0410.

This table covers the upper mounts (and bearings) a strut bolts through at the tower. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Shock / Strut Mount parts for the 2020 Audi S3 come from 5 brands — SACHS, BECK/ARNLEY, ÜRO PARTS and 2 other brands. The "Popular" part is ÜRO PARTS 5Q0412331D.

Daily Driver: 3 parts, from SACHS and BECK/ARNLEY. A representative part number is BECK/ARNLEY 1018818.

The Economy section: 2 options from ÜRO PARTS and DEA / MARMON RIDE CONTROL. ÜRO PARTS 5Q0412331D is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

Listed part numbers: ÜRO PARTS 5Q0412331D, BECK/ARNLEY 1018818 and SACHS 802696, plus the other parts above.

This table covers the Shock Dust covers. Read more

One part is listed for the 2020 Audi S3 — MARELLI KPR106.

This table covers the Subframe bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

3 Subframe Bushing parts are listed for the 2020 Audi S3, from DORMAN and REIN.

Part numbers include DORMAN 537961, DORMAN 537962 and REIN AVM0765.

This table covers the Suspension kits. Read more

BILSTEIN supplies the 5 Suspension Kit parts for the 2020 Audi S3. BILSTEIN 47251588 carries the "Popular" badge.

The Adjustable Performance section lists 2 options from BILSTEIN — grouped under the catalog's "Adjustable Performance" designation — the notes column spells out what sets them apart. BILSTEIN 47251588 is listed in this group.

The Increased Handling/Stability section: 2 options from BILSTEIN. BILSTEIN 46261212 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Listed part numbers: BILSTEIN 47251588, BILSTEIN 48251570 and BILSTEIN 46261212, plus the other parts above.

This table covers the links that connect the anti-roll bar to each control arm or strut. Typical signs include a clunk on one wheel over a driveway, or a rattle that goes away when you lean on the bar. Replace links in pairs; a seized stud often takes the bushing with it. Read more

17 Sway Bar Link parts are listed for the 2020 Audi S3, from MEVOTECH, DELPHI, DORMAN and 7 other brands. DELPHI TC3410 carries the "Popular" badge.

The Daily Driver section: 10 options from DELPHI, DORMAN, SUSPENSIA and 3 other brands. DELPHI TC3410 is listed in this group.

Economy: 7 parts, from FVP, BECK/ARNLEY, MEVOTECH and 2 other brands. A representative part number is FVP SL43255.