2022 Audi S6 Suspension Parts

This table covers the air springs that carry vehicle weight in place of a conventional coil. Read more

2 Air Spring parts for the 2022 Audi S6 come from ARNOTT.

This group includes ARNOTT A3514 and ARNOTT A3515.

This table covers the Air Suspension Solenoid valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Air Suspension Solenoid / Valve parts for the 2022 Audi S6 come from ARNOTT.

Part numbers include ARNOTT VB4339 and ARNOTT VB5644.

This table covers the ball joints that articulate each control arm at the knuckle. Read more

6 Ball Joint parts for the 2022 Audi S6 come from 5 brands — MEVOTECH, MOOG, DORMAN and 2 other brands. The "Popular" part is MEVOTECH MS70528.

In the Daily Driver grade, MEVOTECH, MOOG, DORMAN and 1 other brand supply 4 parts: grouped for everyday commuting duty. A representative part number is MEVOTECH MS70528.

The Economy section lists 2 options from BECK/ARNLEY and MEVOTECH — the catalog's value-priced group. BECK/ARNLEY 1018583 is listed in this group.

Part numbers include MEVOTECH MS70528, MOOG K500468 and DORMAN 538238, among others listed above.

This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm. Read more

75 Control Arm parts for the 2022 Audi S6 come from 6 brands — MEVOTECH, DELPHI, DORMAN and 3 other brands. The "Popular" part is DELPHI TC7776. They are grouped as Daily Driver and Economy, with Daily Driver the largest group at 53 parts from DELPHI, DORMAN, MEVOTECH and 2 other brands.

This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Control Arm Bushing parts for the 2022 Audi S6 come from 2 brands — VAICO and VNE.

This group includes VAICO V105768 and VNE 4009834.

This table covers the Ride Height sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

7 Ride Height Sensor parts for the 2022 Audi S6 come from 2 brands — ARNOTT and MONROE. The "Popular" part is ARNOTT RH4272.

Listed part numbers: ARNOTT RH4272, ARNOTT RH4274 and ARNOTT RH4271, plus the other parts above.

This table covers the shocks and struts that damp wheel motion. Typical signs include a nose that keeps bouncing, cupped tires, or fluid weeping down the body. Replace shocks or struts in axle pairs and renew the mounts if they are torn or collapsed. Read more

5 Shock / Strut parts for the 2022 Audi S6 come from 2 brands — ARNOTT and BILSTEIN. The "Popular" part is ARNOTT SKE5690.

In the Increased Handling/Stability grade, BILSTEIN supplies 1 part: grouped under the catalog's "Increased Handling/Stability" designation — the notes column spells out what sets them apart. A representative part number is BILSTEIN 26324562.

The Original Ride Quality section lists 4 options from ARNOTT and BILSTEIN — grouped under the catalog's "Original Ride Quality" designation — the notes column spells out what sets them apart. ARNOTT SKE5690 is listed in this group.

This group includes ARNOTT SKE5690, BILSTEIN 26324562 and ARNOTT AS3528 and the remaining parts above.

This table covers the Shock / Strut bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: VAICO V108652.

This table covers the upper mounts (and bearings) a strut bolts through at the tower. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 2022 Audi S6 — DEA / MARMON RIDE CONTROL 4713733.

This table covers the bushings that clamp the anti-roll bar to the chassis. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

5 Sway Bar Bushing parts for the 2022 Audi S6 come from 4 brands — VNE, MOOG, DELPHI and 1 other brand. The "Popular" part is MOOG K201571.

This group includes MOOG K201571, DELPHI TD5787W and SUSPENSIA X01BU0626 and the remaining parts above.

This table covers the links that connect the anti-roll bar to each control arm or strut. Typical signs include a clunk on one wheel over a driveway, or a rattle that goes away when you lean on the bar. Replace links in pairs; a seized stud often takes the bushing with it. Read more

14 Sway Bar Link parts for the 2022 Audi S6 come from 8 brands — MEVOTECH, DELPHI, SUSPENSIA and 5 other brands. The "Popular" part is DELPHI TC3598.

Daily Driver: 10 parts, from DELPHI, SUSPENSIA, DORMAN and 3 other brands. A representative part number is DELPHI TC3598.

The Economy section: 4 options from BECK/ARNLEY, FVP and MEVOTECH. BECK/ARNLEY 1018586 is listed in this group.