2023 Audi RS5 Cooling System Parts

Engine:
2.9L V6 Turbocharged

9 Cooling system parts are listed for the 2023 Audi RS5, in 5 part types, covering the 2.9L V6 Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 2023 Audi RS5, the cooling system system keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses. Most of the listed parts are Radiator (4 parts), Coolant Reservoir Cap (2 parts) and Coolant Reservoir (1 part). The other 2 part types cover the remaining 2 parts.

Coolant Reservoir

Brand Part Number Markets Notes Buy
REIN EPT0271
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
without CAP
View on
Amazon

This table covers the overflow / expansion tanks that hold extra coolant.

Coolant Reservoir Cap

Brand Part Number Markets Notes Buy
MOTORAD T111
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Standard
Fitment notes — MOTORAD T111
Standard
Relief Pressure 23 lbs
View on
Amazon
ÜRO PARTS 4M0121321Q
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.

Intercooler

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE CI671000P
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
AluminiumBrazed cooling fins
View on
Amazon

This table covers the intercoolers that cool turbo or supercharger charge air.

Radiator

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE CR960000S
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Brazed cooling fins
Fitment notes — MAHLE / CLEVITE CR960000S
Brazed cooling fins
Engine CoolingPrimary
View on
Amazon
MARELLI BM2176M
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RS5 Base Model
View on
Amazon
MARELLI BM2177M
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RS5 Base Model
View on
Amazon
NISSENS 606578
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Brazed cooling fins
Fitment notes — NISSENS 606578
Brazed cooling fins
Fits:
Engine Cooling (Primary)
or:
RS5 Sportbackwithout Oil Cooler
View on
Amazon

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap.

Radiator Mount

Brand Part Number Markets Notes Buy
REIN AVM0729
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Upper
View on
Amazon

This table covers the Radiator mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Buying Cooling System Parts for a 2023 Audi RS5

On this vehicle, the cooling system system keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses.

  • Confirm you have the 2.9L V6 Turbocharged engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Radiator and Coolant Reservoir Cap .

Frequently Asked Questions

How many cooling system parts fit the 2023 Audi RS5?

Our catalog currently lists 9 cooling system parts for the 2023 Audi RS5 across 5 subcategories and 6 brands, covering the 2.9L V6 Turbocharged engine. Each part is matched to the engine(s) it fits.

What are the signs of cooling system problems on a 2023 Audi RS5?

Common symptoms include a rising temperature gauge in traffic, sweet-smelling steam, crusty deposits around hose clamps, or a heater that blows cold. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2023 Audi RS5 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2023 Audi RS5?

Every part on this page is matched to the 2.9L V6 Turbocharged engine. Then replace coolant with the exact specification the manufacturer calls for — mixing chemistries can gel and block small passages. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2023 Audi RS5

Cooling System Parts for Other Audi RS5 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.