8 Suspension parts are listed for the 2025 Audi Q2, in 3 part types, covering the 1.4L L4 Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2025 Audi Q2, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links. All 8 listed parts are Control Arm (3 parts), Ride Height Sensor (3 parts) and Control Arm Bushing (2 parts).
The 2025 Audi Q2 came with a single engine, the 1.4L L4 Turbocharged, and every part is verified against it.
2 brands supply suspension parts for the 2025 Audi Q2, led by DORMAN (5 parts) and ARNOTT (3 parts).
Each part number listed for the 2025 Audi Q2 opens a page with every vehicle that part fits.
Control Arm
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 526592 | 🇲🇽 MX | Rear Upper | View on Amazon |
| DORMAN | 524915 | 🇲🇽 MX | Rear LeftTrailing Arm | View on Amazon |
| DORMAN | 524916 | 🇲🇽 MX | Rear RightTrailing Arm | View on Amazon |
This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm.
DORMAN supplies the 3 Control Arm parts for the 2025 Audi Q2.
Listed part numbers: DORMAN 526592, DORMAN 524915 and DORMAN 524916.
Control Arm Bushing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 533694 | 🇲🇽 MX | Rear Upper Inner | View on Amazon |
| DORMAN | 533695 | 🇲🇽 MX | Rear Upper Outer | View on Amazon |
This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.
DORMAN supplies both parts for the 2025 Audi Q2.
Listed part numbers: DORMAN 533694 and DORMAN 533695.
Ride Height Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARNOTT | RH5046 | 🇲🇽 MX | Front Right | View on Amazon |
| ARNOTT | RH5047 | 🇲🇽 MX | Front Left | View on Amazon |
| ARNOTT | RH5050 | 🇲🇽 MX | Rear Left | View on Amazon |
This table covers the Ride Height sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
ARNOTT supplies the 3 Ride Height Sensor parts for the 2025 Audi Q2.
Part numbers include ARNOTT RH5046, ARNOTT RH5047 and ARNOTT RH5050.
Buying Suspension Parts for a 2025 Audi Q2
On this vehicle, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links.
- Confirm you have the 1.4L L4 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Control Arm and Ride Height Sensor .
Frequently Asked Questions
How many suspension parts fit the 2025 Audi Q2?
Our catalog currently lists 8 suspension parts for the 2025 Audi Q2 across 3 subcategories and 2 brands, covering the 1.4L L4 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of suspension problems on a 2025 Audi Q2?
Common symptoms include clunks over speed bumps, wandering steering, cupped tire wear, or a nose that keeps bouncing after a dip. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2025 Audi Q2 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2025 Audi Q2?
Every part on this page is matched to the 1.4L L4 Turbocharged engine. Then worn bushings often mimic bad shocks — inspect before buying, and remember loaded vs unloaded strut assemblies differ in labor by hours. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2025 Audi Q2
Suspension Parts for Other Audi Q2 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.