This page lists 33 cooling system parts for the 2025 Audi Q8, across 9 part types, covering both the 3.0L V6 ELECTRIC/GAS Turbocharged and the 3.0L V6 Turbocharged. Every part shows its brand, manufacturer part number and fitment notes.
The cooling system system on the 2025 Audi Q8 keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses. The largest groups are Water Pump (12 parts), Intercooler (7 parts) and Temperature Sender / Sensor (4 parts). The other 6 part types cover the remaining 10 parts.
The 2025 Audi Q8 was sold with both the 3.0L V6 ELECTRIC/GAS Turbocharged and the 3.0L V6 Turbocharged. 14 parts fit every engine; the other 19 are engine-specific. Each part shows which engine(s) it fits.
17 brands supply cooling system parts for the 2025 Audi Q8, led by NISSENS (5 parts), GATES (4 parts) and REIN (3 parts), plus 14 more brands. Quality grades include Standard Replacement, Economy and Heavy Duty.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2025 Audi Q8. 5 parts have it, including NISSENS 961305 (Intercooler) and GATES 41568E (Water Pump). Each part number opens a page with every vehicle that part fits.
Coolant / Antifreeze
Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PRESTONE Fits: all 2025 Q8 engines | AFC12100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Command Nitrite Free Extended Life CoolantYellow Nitrite Free OAT | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Fits: all 2025 Q8 engines | 904683 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | HT-12 Pink1 Gallon | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PRESTONE Fits: all 2025 Q8 engines | 78065 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Heavy Duty | View on Amazon |
This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator.
3 Coolant / Antifreeze parts are listed for the 2025 Audi Q8, from PRESTONE and VALVOLINE. All of them fit every engine offered in the 2025 Q8.
The Heavy Duty section lists 1 option from PRESTONE — rated for severe service. PRESTONE AFC12100 is listed in this group.
The Standard Replacement section lists 1 option from VALVOLINE — built to original-equipment specification. VALVOLINE 904683 is listed in this group.
1 ungrouped part is not assigned to a grade, with the same engine-level match.
Listed part numbers: PRESTONE AFC12100, VALVOLINE 904683 and PRESTONE 78065.
Coolant Reservoir Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD Fits: all 2025 Q8 engines | T111 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard | View on Amazon |
This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.
This group shows a single part: MOTORAD T111.
Intercooler
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NISSENS Popular Fits: 3.0L V6 Turbocharged | 961305 | 🇺🇸 US | Right | View on Amazon |
| NISSENS Popular Fits: 3.0L V6 Turbocharged | 961304 | 🇺🇸 US | Left | View on Amazon |
| GPD Fits: all 2025 Q8 engines | 2711558 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.0L V6 Turbocharged | CI221000P | 🇺🇸 US | Right | View on Amazon |
| MAHLE / CLEVITE Fits: 3.0L V6 Turbocharged | CI640000P | 🇺🇸 US | LeftBrazed cooling fins | View on Amazon |
| TYC Fits: all 2025 Q8 engines | 18135 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left Side | View on Amazon |
| TYC Fits: 3.0L V6 ELECTRIC/GAS Turbocharged | 18151 | 🇲🇽 MX | Right Side | View on Amazon |
This table covers the intercoolers that cool turbo or supercharger charge air.
7 Intercooler parts are listed for the 2025 Audi Q8, from NISSENS, MAHLE / CLEVITE, TYC and 1 other brand. NISSENS 961305 carries the "Popular" badge. 2 parts fit every engine; the other 5 are engine-specific.
Listed part numbers: NISSENS 961305, NISSENS 961304 and GPD 2711558, plus the other parts above.
Radiator
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GPD Fits: all 2025 Q8 engines | 13773C | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CSF Fits: all 2025 Q8 engines | 4002 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| NISSENS Fits: 3.0L V6 Turbocharged | 606578 | 🇺🇸 US | Brazed cooling fins | View on Amazon |
This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap.
3 Radiator parts are listed for the 2025 Audi Q8, from GPD, CSF and NISSENS. 2 parts fit every engine; the other 1 is engine-specific.
In the Economy grade, GPD supplies 1 part: the catalog's value-priced group. A representative part number is GPD 13773C.
The Standard Replacement section: 2 options from CSF and NISSENS. CSF 4002 is listed in this group.
Part numbers include GPD 13773C, CSF 4002 and NISSENS 606578.
Radiator Insulator Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN Fits: all 2025 Q8 engines | AVM0730 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Radiator Insulator sleeves.
This group shows a single part: REIN AVM0730.
Radiator Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN Fits: all 2025 Q8 engines | AVM0729 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
This table covers the Radiator mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
This group shows a single part: REIN AVM0729.
Temperature Sender / Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HOLSTEIN Fits: all 2025 Q8 engines | 2CTS0163 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NISSENS Fits: 3.0L V6 Turbocharged | 207067 | 🇺🇸 US | Oval Connector, bolted connection | View on Amazon |
| VNE Fits: all 2025 Q8 engines | 9408050 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| WELLS Fits: all 2025 Q8 engines | 5S16784 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender.
4 Temperature Sender / Sensor parts are listed for the 2025 Audi Q8, from HOLSTEIN, NISSENS, VNE and 1 other brand. 3 parts fit every engine; the other 1 is engine-specific.
Economy: 1 part, from HOLSTEIN. A representative part number is HOLSTEIN 2CTS0163.
The Standard Replacement section: 3 options from NISSENS, VNE and WELLS. NISSENS 207067 is listed in this group.
Part numbers include HOLSTEIN 2CTS0163, NISSENS 207067 and VNE 9408050, among others listed above.
Thermostat
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD Fits: all 2025 Q8 engines | 1229221 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Sensor and SealStandard | View on Amazon |
This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part.
This group shows a single part: MOTORAD 1229221.
Water Pump
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN Fits: 3.0L V6 ELECTRIC/GAS Turbocharged | WPA0541 | 🇲🇽 MX | To TurbochargerAuxiliary | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GATES Popular Fits: 3.0L V6 ELECTRIC/GAS Turbocharged | 41568E | 🇲🇽 MX | Electric | View on Amazon |
| GATES Popular Fits: 3.0L V6 ELECTRIC/GAS Turbocharged | 41606E | 🇲🇽 MX | Electric | View on Amazon |
| FOUR SEASONS Fits: 3.0L V6 ELECTRIC/GAS Turbocharged | 89084 | 🇲🇽 MX | Turbocharger Coolant Pump | View on Amazon |
| GMB Fits: 3.0L V6 ELECTRIC/GAS Turbocharged | 1804050 | 🇲🇽 MX | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GATES Popular Fits: 3.0L V6 Turbocharged | 41568E | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Electric | View on Amazon |
| FOUR SEASONS Fits: 3.0L V6 Turbocharged | 89084 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Turbocharger Coolant Pump | View on Amazon |
| FVP Fits: 3.0L V6 ELECTRIC/GAS Turbocharged | 1804050 | 🇲🇽 MX | Impeller Rotation: Counter-Clockwise | View on Amazon |
| GATES Fits: 3.0L V6 Turbocharged | 41606E | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Electric | View on Amazon |
| NISSENS Fits: 3.0L V6 Turbocharged | 832152 | 🇺🇸 US | Auxiliary | View on Amazon |
| PIERBURG Fits: 3.0L V6 Turbocharged | 704934540 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Electric | View on Amazon |
| VNE Fits: 3.0L V6 ELECTRIC/GAS Turbocharged | 4019013 | 🇲🇽 MX | View on Amazon |
This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off.
12 Water Pump parts for the 2025 Audi Q8 come from 8 brands — GATES, FOUR SEASONS, REIN and 5 other brands. The "Popular" part is GATES 41568E.
The Economy section: 1 option from REIN. REIN WPA0541 is listed in this group.
Standard Replacement: 4 parts, from GATES, FOUR SEASONS and GMB. A representative part number is GATES 41568E.
7 further parts sit outside the graded sections, with the same engine-level match.
Buying Cooling System Parts for a 2025 Audi Q8
On this vehicle, the cooling system system keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses.
- Match the engine first. Some cooling system parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Water Pump and Intercooler .
Frequently Asked Questions
How many cooling system parts fit the 2025 Audi Q8?
Our catalog currently lists 33 cooling system parts for the 2025 Audi Q8 across 9 subcategories and 17 brands, covering both the 3.0L V6 ELECTRIC/GAS Turbocharged and the 3.0L V6 Turbocharged. Each part is matched to the engine(s) it fits.
Do cooling system parts differ between 2025 Audi Q8 engines?
Some do. 14 parts fit every engine; the other 19 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of cooling system problems on a 2025 Audi Q8?
Common symptoms include a rising temperature gauge in traffic, sweet-smelling steam, crusty deposits around hose clamps, or a heater that blows cold. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2025 Audi Q8 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2025 Audi Q8?
First match the engine — each row shows which engine(s) the part fits. Then replace coolant with the exact specification the manufacturer calls for — mixing chemistries can gel and block small passages. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2025 Audi Q8
Cooling System Parts for Other Audi Q8 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.