2026 Audi Q3 Cooling System Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

5 Cooling system parts are listed for the 2026 Audi Q3, in 4 part types, covering both the 1.4L L4 Turbocharged and the 2.0L L4 Turbocharged. Each one has a brand, a manufacturer part number and notes that say where it fits.

The cooling system system on the 2026 Audi Q3 keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses. The largest groups are Coolant / Antifreeze (2 parts), Coolant Hose / Pipe (1 part) and Intercooler Mount (1 part). The other 1 part type covers the remaining 1 part.

Coolant / Antifreeze

Economy

Brand Part Number Markets Notes Buy
VALVOLINE Fits: 2.0L L4 Turbocharged 719009
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Multi-Vehicle Yellow1 Gallon
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
VALVOLINE Fits: 2.0L L4 Turbocharged 904683
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
HT-12 Pink1 Gallon
Fitment notes — VALVOLINE 904683
HT-12 Pink1 Gallon
(Type: Concentrated)
View on
Amazon

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator.

Coolant Hose / Pipe

Brand Part Number Markets Notes Buy
REIN Fits: 2.0L L4 Turbocharged CHP0663
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Pipe
Fitment notes — REIN CHP0663
Pipe
Oil Cooler To Thermostat
View on
Amazon

This table covers the hard pipes and extra hoses in the coolant circuit.

Intercooler Mount

Brand Part Number Markets Notes Buy
REIN Fits: 2.0L L4 Turbocharged AVM0728
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Lower
View on
Amazon

This table covers the Intercooler mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Radiator Mount

Brand Part Number Markets Notes Buy
REIN Fits: 2.0L L4 Turbocharged AVM0728
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Lower
View on
Amazon

This table covers the Radiator mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Buying Cooling System Parts for a 2026 Audi Q3

On this vehicle, the cooling system system keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses.

  • Match the engine first. Every cooling system part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Coolant / Antifreeze and Coolant Hose / Pipe .

Frequently Asked Questions

How many cooling system parts fit the 2026 Audi Q3?

Our catalog currently lists 5 cooling system parts for the 2026 Audi Q3 across 4 subcategories and 2 brands, covering both the 1.4L L4 Turbocharged and the 2.0L L4 Turbocharged. Each part is matched to the engine(s) it fits.

Do cooling system parts differ between 2026 Audi Q3 engines?

Yes. Every cooling system part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of cooling system problems on a 2026 Audi Q3?

Common symptoms include a rising temperature gauge in traffic, sweet-smelling steam, crusty deposits around hose clamps, or a heater that blows cold. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2026 Audi Q3 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2026 Audi Q3?

First match the engine — each row shows which engine(s) the part fits. Then replace coolant with the exact specification the manufacturer calls for — mixing chemistries can gel and block small passages. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2026 Audi Q3

Cooling System Parts for Other Audi Q3 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.