2026 Audi RS3 Suspension Parts

Engine:
2.5L L5 Turbocharged

This page lists 10 suspension parts for the 2026 Audi RS3, across 7 part types, covering the 2.5L L5 Turbocharged engine. Every part shows its brand, manufacturer part number and fitment notes.

The suspension system on the 2026 Audi RS3 controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links. The largest groups are Control Arm (3 parts), Ball Joint (2 parts) and Bump Stop (1 part). The other 4 part types cover the remaining 4 parts.

Ball Joint

Brand Part Number Markets Notes Buy
LEMFÖRDER 2999802
🇺🇸 US 🇨🇦 CA
Front Left
View on
Amazon
LEMFÖRDER 2999902
🇺🇸 US 🇨🇦 CA
Front Right
View on
Amazon

This table covers the ball joints that articulate each control arm at the knuckle.

Bump Stop

Brand Part Number Markets Notes Buy
REIN AVZ0559
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Frontwith PR Code G02, G04, G06, G08, with 70mm Length
View on
Amazon

This table covers the bump stops that limit suspension travel.

Control Arm

Brand Part Number Markets Notes Buy
DELPHI TC3769
🇺🇸 US 🇨🇦 CA
Rear Lower ForwardLateral Arm
View on
Amazon
DELPHI TC6880
🇺🇸 US 🇨🇦 CA
Rear Lower Rearward
View on
Amazon
DORMAN 526592
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear Upper
View on
Amazon

This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm.

Control Arm Anchor Bolt

Brand Part Number Markets Notes Buy
REIN HWB1045
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear Upper Inner12x82.5mm
View on
Amazon

This table covers the bolts that anchor a control arm to the chassis or subframe.

Control Arm Bushing

Brand Part Number Markets Notes Buy
LEMFÖRDER 2730601
🇺🇸 US 🇨🇦 CA
Rear Lower Outer Rearward
View on
Amazon

This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.

Subframe Mount

Brand Part Number Markets Notes Buy
REIN AVM0767
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
View on
Amazon

This table covers the Subframe mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Buying Suspension Parts for a 2026 Audi RS3

On this vehicle, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links.

  • Confirm you have the 2.5L L5 Turbocharged engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Control Arm and Ball Joint .

Frequently Asked Questions

How many suspension parts fit the 2026 Audi RS3?

Our catalog currently lists 10 suspension parts for the 2026 Audi RS3 across 7 subcategories and 4 brands, covering the 2.5L L5 Turbocharged engine. Each part is matched to the engine(s) it fits.

What are the signs of suspension problems on a 2026 Audi RS3?

Common symptoms include clunks over speed bumps, wandering steering, cupped tire wear, or a nose that keeps bouncing after a dip. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2026 Audi RS3 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2026 Audi RS3?

Every part on this page is matched to the 2.5L L5 Turbocharged engine. Then worn bushings often mimic bad shocks — inspect before buying, and remember loaded vs unloaded strut assemblies differ in labor by hours. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2026 Audi RS3

Suspension Parts for Other Audi RS3 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.