9 Electrical parts are listed for the 1958 Austin-Healey 100-6, in 4 part types, covering the 2.6L L6 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The electrical system on the 1958 Austin-Healey 100-6 covers charging, starting and the sensors and modules the vehicle relies on, from alternator and starter to oxygen sensors. The largest groups are Battery (4 parts), Battery Cable (2 parts) and Starter Motor (2 parts). The other 1 part type covers the remaining 1 part.
The 1958 Austin-Healey 100-6 came with a single engine, the 2.6L L6, and every part is verified against it.
7 brands supply electrical parts for the 1958 Austin-Healey 100-6, led by FVP (2 parts), STANDARD MOTOR PRODUCTS (2 parts) and EXIDE (1 part), plus 4 more brands.
Each part number listed for the 1958 Austin-Healey 100-6 opens a page with every vehicle that part fits.
Battery
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| EXIDE | MX24 | 🇺🇸 US | Marathon MaxBCI Group 24 | View on Amazon |
| FULLRIVER | FT84024M | 🇺🇸 US | AGMBCI Group 24 | View on Amazon |
| FVP | P24AGM | 🇺🇸 US | Platinum AGMBCI Group: 24 | View on Amazon |
| FVP | P24RAGM | 🇺🇸 US | Platinum AGMBCI Group: 24 | View on Amazon |
This table covers the batteries listed by group size and specification. Typical signs include slow cranking, a battery lamp, or a no-start after the vehicle sat overnight. Confirm group size and terminal layout in the notes. Clean the posts and the ground before condemning the battery.
4 Battery parts are listed for the 1958 Austin-Healey 100-6, from FVP, EXIDE and FULLRIVER.
Listed part numbers: EXIDE MX24, FULLRIVER FT84024M and FVP P24AGM, plus the other parts above.
Battery Cable
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | A194L | 🇺🇸 US | PositiveSwitch To Starter | View on Amazon |
| STANDARD MOTOR PRODUCTS | B17 | 🇺🇸 US | Ground StrapBraided | View on Amazon |
This table covers the positive and ground cables that run from the battery. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early.
2 Battery Cable parts for the 1958 Austin-Healey 100-6 come from STANDARD MOTOR PRODUCTS.
Part numbers include STANDARD MOTOR PRODUCTS A194L and STANDARD MOTOR PRODUCTS B17.
Starter Motor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REMY | 16469 | 🇺🇸 US | Remanufactured | View on Amazon |
| TERREPOWER | 16106 | 🇺🇸 US | Remanufactured | View on Amazon |
This table covers the starter motors that crank the engine. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor.
2 Starter Motor parts for the 1958 Austin-Healey 100-6 come from 2 brands — REMY and TERREPOWER.
This group includes REMY 16469 and TERREPOWER 16106.
Starter Solenoid Switch Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| METRO | RP1 | 🇺🇸 US 🇨🇦 CA | Sold IndividuallyReproduction | View on Amazon |
This table covers the Starter Solenoid Switch covers.
One part is listed for the 1958 Austin-Healey 100-6 — METRO RP1.
Buying Electrical Parts for a 1958 Austin-Healey 100-6
On this vehicle, the electrical system covers charging, starting and the sensors and modules the vehicle relies on, from alternator and starter to oxygen sensors.
- Confirm you have the 2.6L L6 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, clean or renew the battery terminals and grounds with any charging-system repair.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Battery and Battery Cable .
Frequently Asked Questions
How many electrical parts fit the 1958 Austin-Healey 100-6?
Our catalog currently lists 9 electrical parts for the 1958 Austin-Healey 100-6 across 4 subcategories and 7 brands, covering the 2.6L L6 engine. Each part is matched to the engine(s) it fits.
What are the signs of electrical problems on a 1958 Austin-Healey 100-6?
Common symptoms include slow cranking on cold mornings, a battery light that flickers, dim lights at idle, or a check-engine code pointing at a sensor circuit. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, clean or renew the battery terminals and grounds with any charging-system repair.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1958 Austin-Healey 100-6 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1958 Austin-Healey 100-6?
Every part on this page is matched to the 2.6L L6 engine. Then test before replacing — a failed alternator and a bad ground can look identical, and sensors are frequently condemned for wiring faults. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1958 Austin-Healey 100-6
Electrical Parts for Other Austin-Healey 100-6 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.