The 1967 Austin-Healey 3000 has 7 engine parts with verified fitment on this page — 4 part types and 4 brands, covering the 2.9L L6 engine. Each part includes a manufacturer part number and application notes.
On the 1967 Austin-Healey 3000, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Engine Block Heater (2 parts), Timing Cover Repair Sleeve (2 parts) and Timing Cover Seal (2 parts). The other 1 part type covers the remaining 1 part.
Every part on this page is matched to the 2.9L L6 — the only engine offered in the 1967 Austin-Healey 3000.
The most listed brands for 1967 Austin-Healey 3000 engine parts are KAT'S HEATERS (2 parts), SCHAEFFLER (2 parts) and SKF (2 parts), plus 1 more brand.
Each part number listed for the 1967 Austin-Healey 3000 opens a page with every vehicle that part fits.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KAT'S HEATERS | 11607 | 🇺🇸 US | Freeze Plug Heater | View on Amazon |
| KAT'S HEATERS | 13100 | 🇺🇸 US | Circulation Tank Heater Thermostatically Controlled | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
KAT'S HEATERS supplies both parts for the 1967 Austin-Healey 3000.
Part numbers include KAT'S HEATERS 11607 and KAT'S HEATERS 13100.
Motor Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY | 1040369 | 🇺🇸 US | Rear | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
One part is listed for the 1967 Austin-Healey 3000 — BECK/ARNLEY 1040369.
Timing Cover Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHAEFFLER | SR3509 | 🇺🇸 US | with 1.938 In Shaft17.48 mm Width | View on Amazon |
| SKF | 99193 | 🇺🇸 US | Shaft Diameter: 1.937 In | View on Amazon |
This table covers the wear sleeves used to restore a Timing Cover seal surface.
2 Timing Cover Repair Sleeve parts are listed for the 1967 Austin-Healey 3000, from SCHAEFFLER and SKF.
Listed part numbers: SCHAEFFLER SR3509 and SKF 99193.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHAEFFLER | SS2976 | 🇺🇸 US | 2.51" O.D. X 0.38" Width | View on Amazon |
| SKF | 19220 | 🇺🇸 US | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Timing Cover Seal parts are listed for the 1967 Austin-Healey 3000, from SCHAEFFLER and SKF.
Listed part numbers: SCHAEFFLER SS2976 and SKF 19220.
Buying Engine Parts for a 1967 Austin-Healey 3000
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 2.9L L6 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Engine Block Heater and Timing Cover Repair Sleeve .
Frequently Asked Questions
How many engine parts fit the 1967 Austin-Healey 3000?
Our catalog currently lists 7 engine parts for the 1967 Austin-Healey 3000 across 4 subcategories and 4 brands, covering the 2.9L L6 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 1967 Austin-Healey 3000?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1967 Austin-Healey 3000 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1967 Austin-Healey 3000?
Every part on this page is matched to the 2.9L L6 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1967 Austin-Healey 3000
Engine Parts for Other Austin-Healey 3000 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.