1949 Austin A90 Ignition Parts

Engine:
2.7L 162cid L4

10 Ignition parts are listed for the 1949 Austin A90, in 2 part types, covering the 2.7L 162cid L4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

The ignition system on the 1949 Austin A90 delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 10 listed parts are Spark Plug (9 parts) and Ignition Conversion Kit (1 part).

Ignition Conversion Kit

Brand Part Number Markets Notes Buy
WELLS 1A4224
🇺🇸 US
Lucas Distributor # DKY4A, DKYH4A, Lobe Sensor Module12 Volt
Fitment notes — WELLS 1A4224
Lucas Distributor # DKY4A, DKYH4A, Lobe Sensor Module12 Voltwith Positive Ground
View on
Amazon

This table covers the Ignition Conversion kits.

Spark Plug

Summary: Notes include pre-set gaps of 0.025", 0.03", 0.032", 0.034" and 0.035". Replacement brands in this table include CHAMPION, ACDELCO and AUTOLITE.

Copper / Nickel

Brand Part Number Markets Notes Buy
ACDELCO Popular R44XL
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R44XL
ProfessionalConventionalPre-Set Gap: 0.034"
Original Equipment-Recommended Gap: .025
View on
Amazon
AUTOLITE 404
🇺🇸 US
Copper ResistorPre-Set Gap: 0.034"
Fitment notes — AUTOLITE 404
Copper ResistorPre-Set Gap: 0.034"
Gap .025 (In) 0.6 (mm)OE Style
View on
Amazon
CHAMPION 315
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 315
Copper PlusPre-Set Gap: 0.025"
OE-Recommended Gap: 0.025"
View on
Amazon
CHAMPION 332
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 332
Copper PlusPre-Set Gap: 0.025"
Resistor TypeOE-Recommended Gap: 0.025"
View on
Amazon
CHAMPION 3321
🇺🇸 US
Copper Plus
Fitment notes — CHAMPION 3321
Copper Plus
Resistor TypeOE-Recommended Gap: 0.025"
View on
Amazon
MOTORCRAFT SP466
🇺🇸 US
Copper
Fitment notes — MOTORCRAFT SP466
Copper
OE Style.025"/0.6mm
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO 41804
🇺🇸 US 🇨🇦 CA
ProfessionalDouble Platinum
Fitment notes — ACDELCO 41804
ProfessionalDouble PlatinumPre-Set Gap: 0.035"
OE-Recommended Gap: 0.025"
View on
Amazon
CHAMPION 7415
🇺🇸 US
Double Platinum PowerPre-Set Gap: 0.032"
Fitment notes — CHAMPION 7415
Double Platinum PowerPre-Set Gap: 0.032"
OE-Recommended Gap: 0.025"Resistor Plug
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
CHAMPION Popular 9804
🇺🇸 US
IridiumPre-Set Gap: 0.03"
Fitment notes — CHAMPION 9804
IridiumPre-Set Gap: 0.03"
OE-Recommended Gap: 0.025"
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1949 Austin A90

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 2.7L 162cid L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Ignition Conversion Kit .

Frequently Asked Questions

How many ignition parts fit the 1949 Austin A90?

Our catalog currently lists 10 ignition parts for the 1949 Austin A90 across 2 subcategories and 5 brands, covering the 2.7L 162cid L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1949 Austin A90?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1949 Austin A90?

Notes on this page include pre-set gaps of 0.025", 0.03", 0.032", 0.034" and 0.035". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1949 Austin A90 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1949 Austin A90?

Every part on this page is matched to the 2.7L 162cid L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1949 Austin A90

Ignition Parts for Other Austin A90 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.